steps for problem solving and decision making

Work Life is Atlassian’s flagship publication dedicated to unleashing the potential of every team through real-life advice, inspiring stories, and thoughtful perspectives from leaders around the world.

Contributing Writer

Work Futurist

Senior Quantitative Researcher, People Insights

Principal Writer

This is how effective teams navigate the decision-making process

Zero Magic 8 Balls required.

Get stories like this in your inbox

Flipping a coin. Throwing a dart at a board. Pulling a slip of paper out of a hat.

Sure, they’re all ways to make a choice. But they all hinge on random chance rather than analysis, reflection, and strategy — you know, the things you actually need to make the big, meaty decisions that have major impacts.

So, set down that Magic 8 Ball and back away slowly. Let’s walk through the standard framework for decision-making that will help you and your team pinpoint the problem, consider your options, and make your most informed selection. Here’s a closer look at each of the seven steps of the decision-making process, and how to approach each one. 

Step 1: Identify the decision

Most of us are eager to tie on our superhero capes and jump into problem-solving mode — especially if our team is depending on a solution. But you can’t solve a problem until you have a full grasp on what it actually is .

This first step focuses on getting the lay of the land when it comes to your decision. What specific problem are you trying to solve? What goal are you trying to achieve? 

How to do it: 

• Use the 5 whys analysis to go beyond surface-level symptoms and understand the root cause of a problem.
• Try problem framing to dig deep on the ins and outs of whatever problem your team is fixing. The point is to define the problem, not solve it. 

⚠️ Watch out for: Decision fatigue , which is the tendency to make worse decisions as a result of needing to make too many of them. Making choices is mentally taxing , which is why it’s helpful to pinpoint one decision at a time. 

2. Gather information

Your team probably has a few hunches and best guesses, but those can lead to knee-jerk reactions. Take care to invest adequate time and research into your decision.

This step is when you build your case, so to speak. Collect relevant information — that could be data, customer stories, information about past projects, feedback, or whatever else seems pertinent. You’ll use that to make decisions that are informed, rather than impulsive.

• Host a team mindmapping session to freely explore ideas and make connections between them. It can help you identify what information will best support the process.
• Create a project poster to define your goals and also determine what information you already know and what you still need to find out. 

⚠️ Watch out for: Information bias , or the tendency to seek out information even if it won’t impact your action. We have the tendency to think more information is always better, but pulling together a bunch of facts and insights that aren’t applicable may cloud your judgment rather than offer clarity. 

3. Identify alternatives

Use divergent thinking to generate fresh ideas in your next brainstorm

Blame the popularity of the coin toss, but making a decision often feels like choosing between only two options. Do you want heads or tails? Door number one or door number two? In reality, your options aren’t usually so cut and dried. Take advantage of this opportunity to get creative and brainstorm all sorts of routes or solutions. There’s no need to box yourselves in. 

• Use the Six Thinking Hats technique to explore the problem or goal from all sides: information, emotions and instinct, risks, benefits, and creativity. It can help you and your team break away from your typical roles or mindsets and think more freely.
• Try brainwriting so team members can write down their ideas independently before sharing with the group. Research shows that this quiet, lone thinking time can boost psychological safety and generate more creative suggestions .

⚠️ Watch out for: Groupthink , which is the tendency of a group to make non-optimal decisions in the interest of conformity. People don’t want to rock the boat, so they don’t speak up. 

4. Consider the evidence

Armed with your list of alternatives, it’s time to take a closer look and determine which ones could be worth pursuing. You and your team should ask questions like “How will this solution address the problem or achieve the goal?” and “What are the pros and cons of this option?” 

Be honest with your answers (and back them up with the information you already collected when you can). Remind the team that this isn’t about advocating for their own suggestions to “win” — it’s about whittling your options down to the best decision. 

How to do it:

• Use a SWOT analysis to dig into the strengths, weaknesses, opportunities, and threats of the options you’re seriously considering.
• Run a project trade-off analysis to understand what constraints (such as time, scope, or cost) the team is most willing to compromise on if needed. 

⚠️ Watch out for: Extinction by instinct , which is the urge to make a decision just to get it over with. You didn’t come this far to settle for a “good enough” option! 

5. Choose among the alternatives

This is it — it’s the big moment when you and the team actually make the decision. You’ve identified all possible options, considered the supporting evidence, and are ready to choose how you’ll move forward.

However, bear in mind that there’s still a surprising amount of room for flexibility here. Maybe you’ll modify an alternative or combine a few suggested solutions together to land on the best fit for your problem and your team. 

• Use the DACI framework (that stands for “driver, approver, contributor, informed”) to understand who ultimately has the final say in decisions. The decision-making process can be collaborative, but eventually someone needs to be empowered to make the final call.
• Try a simple voting method for decisions that are more democratized. You’ll simply tally your team’s votes and go with the majority. 

⚠️ Watch out for: Analysis paralysis , which is when you overthink something to such a great degree that you feel overwhelmed and freeze when it’s time to actually make a choice. 

6. Take action

Making a big decision takes a hefty amount of work, but it’s only the first part of the process — now you need to actually implement it. 

It’s tempting to think that decisions will work themselves out once they’re made. But particularly in a team setting, it’s crucial to invest just as much thought and planning into communicating the decision and successfully rolling it out. 

• Create a stakeholder communications plan to determine how you’ll keep various people — direct team members, company leaders, customers, or whoever else has an active interest in your decision — in the loop on your progress.
• Define the goals, signals, and measures of your decision so you’ll have an easier time aligning the team around the next steps and determining whether or not they’re successful. 

⚠️Watch out for: Self-doubt, or the tendency to question whether or not you’re making the right move. While we’re hardwired for doubt , now isn’t the time to be a skeptic about your decision. You and the team have done the work, so trust the process. 

7. Review your decision

9 retrospective techniques that won’t bore your team to tears

As the decision itself starts to shake out, it’s time to take a look in the rearview mirror and reflect on how things went.

Did your decision work out the way you and the team hoped? What happened? Examine both the good and the bad. What should you keep in mind if and when you need to make this sort of decision again? 

• Do a 4 L’s retrospective to talk through what you and the team loved, loathed, learned, and longed for as a result of that decision.
• Celebrate any wins (yes, even the small ones ) related to that decision. It gives morale a good kick in the pants and can also help make future decisions feel a little less intimidating.

⚠️ Watch out for: Hindsight bias , or the tendency to look back on events with the knowledge you have now and beat yourself up for not knowing better at the time. Even with careful thought and planning, some decisions don’t work out — but you can only operate with the information you have at the time. 

Making smart decisions about the decision-making process

You’re probably picking up on the fact that the decision-making process is fairly comprehensive. And the truth is that the model is likely overkill for the small and inconsequential decisions you or your team members need to make.

Deciding whether you should order tacos or sandwiches for your team offsite doesn’t warrant this much discussion and elbow grease. But figuring out which major project to prioritize next? That requires some careful and collaborative thought. 

It all comes back to the concept of satisficing versus maximizing , which are two different perspectives on decision making. Here’s the gist:

• Maximizers aim to get the very best out of every single decision.
• Satisficers are willing to settle for “good enough” rather than obsessing over achieving the best outcome.

One of those isn’t necessarily better than the other — and, in fact, they both have their time and place.

A major decision with far-reaching impacts deserves some fixation and perfectionism. However, hemming and hawing over trivial choices ( “Should we start our team meeting with casual small talk or a structured icebreaker?” ) will only cause added stress, frustration, and slowdowns. 

As with anything else, it’s worth thinking about the potential impacts to determine just how much deliberation and precision a decision actually requires. 

Decision-making is one of those things that’s part art and part science. You’ll likely have some gut feelings and instincts that are worth taking into account. But those should also be complemented with plenty of evidence, evaluation, and collaboration.

The decision-making process is a framework that helps you strike that balance. Follow the seven steps and you and your team can feel confident in the decisions you make — while leaving the darts and coins where they belong.

Advice, stories, and expertise about work life today.

.css-s5s6ko{margin-right:42px;color:#F5F4F3;}@media (max-width: 1120px){.css-s5s6ko{margin-right:12px;}} AI that works. Coming June 5, Asana redefines work management—again. .css-1ixh9fn{display:inline-block;}@media (max-width: 480px){.css-1ixh9fn{display:block;margin-top:12px;}} .css-1uaoevr-heading-6{font-size:14px;line-height:24px;font-weight:500;-webkit-text-decoration:underline;text-decoration:underline;color:#F5F4F3;}.css-1uaoevr-heading-6:hover{color:#F5F4F3;} .css-ora5nu-heading-6{display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;-webkit-box-pack:start;-ms-flex-pack:start;-webkit-justify-content:flex-start;justify-content:flex-start;color:#0D0E10;-webkit-transition:all 0.3s;transition:all 0.3s;position:relative;font-size:16px;line-height:28px;padding:0;font-size:14px;line-height:24px;font-weight:500;-webkit-text-decoration:underline;text-decoration:underline;color:#F5F4F3;}.css-ora5nu-heading-6:hover{border-bottom:0;color:#CD4848;}.css-ora5nu-heading-6:hover path{fill:#CD4848;}.css-ora5nu-heading-6:hover div{border-color:#CD4848;}.css-ora5nu-heading-6:hover div:before{border-left-color:#CD4848;}.css-ora5nu-heading-6:active{border-bottom:0;background-color:#EBE8E8;color:#0D0E10;}.css-ora5nu-heading-6:active path{fill:#0D0E10;}.css-ora5nu-heading-6:active div{border-color:#0D0E10;}.css-ora5nu-heading-6:active div:before{border-left-color:#0D0E10;}.css-ora5nu-heading-6:hover{color:#F5F4F3;} Get early access .css-1k6cidy{width:11px;height:11px;margin-left:8px;}.css-1k6cidy path{fill:currentColor;}

• Product overview
• All features
• App integrations

CAPABILITIES

• project icon Project management
• Project views
• Custom fields
• Status updates
• goal icon Goals and reporting
• Reporting dashboards
• workflow icon Workflows and automation
• portfolio icon Resource management
• Time tracking
• my-task icon Admin and security
• Admin console
• asana-intelligence icon Asana Intelligence
• list icon Personal
• premium icon Starter
• briefcase icon Advanced
• Goal management
• Organizational planning
• Campaign management
• Creative production
• Marketing strategic planning
• Request tracking
• Resource planning
• Project intake
• View all uses arrow-right icon
• Project plans
• Team goals & objectives
• Team continuity
• Meeting agenda
• View all templates arrow-right icon
• Work management resources Discover best practices, watch webinars, get insights
• What's new Learn about the latest and greatest from Asana
• Customer stories See how the world's best organizations drive work innovation with Asana
• Help Center Get lots of tips, tricks, and advice to get the most from Asana
• Asana Academy Sign up for interactive courses and webinars to learn Asana
• Developers Learn more about building apps on the Asana platform
• Community programs Connect with and learn from Asana customers around the world
• Events Find out about upcoming events near you
• Partners Learn more about our partner programs
• Support Need help? Contact the Asana support team
• Asana for nonprofits Get more information on our nonprofit discount program, and apply.

Featured Reads

• Leadership |
• 7 important steps in the decision makin ...

7 important steps in the decision making process

The decision making process is a method of gathering information, assessing alternatives, and making a final choice with the goal of making the best decision possible. In this article, we detail the step-by-step process on how to make a good decision and explain different decision making methodologies.

We make decisions every day. Take the bus to work or call a car? Chocolate or vanilla ice cream? Whole milk or two percent?

There's an entire process that goes into making those tiny decisions, and while these are simple, easy choices, how do we end up making more challenging decisions? 

At work, decisions aren't as simple as choosing what kind of milk you want in your latte in the morning. That’s why understanding the decision making process is so important. 

What is the decision making process?

The decision making process is the method of gathering information, assessing alternatives, and, ultimately, making a final choice. 

Decision-making tools for agile businesses

In this ebook, learn how to equip employees to make better decisions—so your business can pivot, adapt, and tackle challenges more effectively than your competition.

The 7 steps of the decision making process

Step 1: identify the decision that needs to be made.

When you're identifying the decision, ask yourself a few questions: 

What is the problem that needs to be solved?

What is the goal you plan to achieve by implementing this decision?

How will you measure success?

These questions are all common goal setting techniques that will ultimately help you come up with possible solutions. When the problem is clearly defined, you then have more information to come up with the best decision to solve the problem.

Step 2: Gather relevant information

​Gathering information related to the decision being made is an important step to making an informed decision. Does your team have any historical data as it relates to this issue? Has anybody attempted to solve this problem before?

It's also important to look for information outside of your team or company. Effective decision making requires information from many different sources. Find external resources, whether it’s doing market research, working with a consultant, or talking with colleagues at a different company who have relevant experience. Gathering information helps your team identify different solutions to your problem.

Step 3: Identify alternative solutions

This step requires you to look for many different solutions for the problem at hand. Finding more than one possible alternative is important when it comes to business decision-making, because different stakeholders may have different needs depending on their role. For example, if a company is looking for a work management tool, the design team may have different needs than a development team. Choosing only one solution right off the bat might not be the right course of action. 

Step 4: Weigh the evidence

This is when you take all of the different solutions you’ve come up with and analyze how they would address your initial problem. Your team begins identifying the pros and cons of each option, and eliminating alternatives from those choices.

There are a few common ways your team can analyze and weigh the evidence of options:

Pros and cons list

SWOT analysis

Decision matrix

Step 5: Choose among the alternatives

The next step is to make your final decision. Consider all of the information you've collected and how this decision may affect each stakeholder. 

Sometimes the right decision is not one of the alternatives, but a blend of a few different alternatives. Effective decision-making involves creative problem solving and thinking out of the box, so don't limit you or your teams to clear-cut options.

One of the key values at Asana is to reject false tradeoffs. Choosing just one decision can mean losing benefits in others. If you can, try and find options that go beyond just the alternatives presented.

Step 6: Take action

Once the final decision maker gives the green light, it's time to put the solution into action. Take the time to create an implementation plan so that your team is on the same page for next steps. Then it’s time to put your plan into action and monitor progress to determine whether or not this decision was a good one. 

Step 7: Review your decision and its impact (both good and bad)

Once you’ve made a decision, you can monitor the success metrics you outlined in step 1. This is how you determine whether or not this solution meets your team's criteria of success.

Here are a few questions to consider when reviewing your decision:

Did it solve the problem your team identified in step 1? 

Did this decision impact your team in a positive or negative way?

Which stakeholders benefited from this decision? Which stakeholders were impacted negatively?

If this solution was not the best alternative, your team might benefit from using an iterative form of project management. This enables your team to quickly adapt to changes, and make the best decisions with the resources they have. 

Types of decision making models

While most decision making models revolve around the same seven steps, here are a few different methodologies to help you make a good decision.

​Rational decision making models

This type of decision making model is the most common type that you'll see. It's logical and sequential. The seven steps listed above are an example of the rational decision making model. 

When your decision has a big impact on your team and you need to maximize outcomes, this is the type of decision making process you should use. It requires you to consider a wide range of viewpoints with little bias so you can make the best decision possible. 

Intuitive decision making models

This type of decision making model is dictated not by information or data, but by gut instincts. This form of decision making requires previous experience and pattern recognition to form strong instincts.

This type of decision making is often made by decision makers who have a lot of experience with similar kinds of problems. They have already had proven success with the solution they're looking to implement. 

Creative decision making model

The creative decision making model involves collecting information and insights about a problem and coming up with potential ideas for a solution, similar to the rational decision making model. 

The difference here is that instead of identifying the pros and cons of each alternative, the decision maker enters a period in which they try not to actively think about the solution at all. The goal is to have their subconscious take over and lead them to the right decision, similar to the intuitive decision making model. 

This situation is best used in an iterative process so that teams can test their solutions and adapt as things change.

Track key decisions with a work management tool

Tracking key decisions can be challenging when not documented correctly. Learn more about how a work management tool like Asana can help your team track key decisions, collaborate with teammates, and stay on top of progress all in one place.

Related resources

Grant management: A nonprofit’s guide

Fix these common onboarding challenges to boost productivity

How Asana uses work management for organizational planning

Understanding dependencies in project management

• Business Essentials
• Leadership & Management
• Credential of Leadership, Impact, and Management in Business (CLIMB)
• Entrepreneurship & Innovation
• Digital Transformation
• Finance & Accounting
• Business in Society
• For Organizations
• Support Portal
• Media Coverage
• Founding Donors
• Leadership Team

• Harvard Business School →
• HBS Online →
• Business Insights →

Business Insights

Harvard Business School Online's Business Insights Blog provides the career insights you need to achieve your goals and gain confidence in your business skills.

• Career Development
• Communication
• Decision-Making
• Earning Your MBA
• Negotiation
• News & Events
• Productivity
• Staff Spotlight
• Student Profiles
• Work-Life Balance
• AI Essentials for Business
• Alternative Investments
• Business Analytics
• Business Strategy
• Business and Climate Change
• Design Thinking and Innovation
• Digital Marketing Strategy
• Disruptive Strategy
• Economics for Managers
• Entrepreneurship Essentials
• Financial Accounting
• Global Business
• Launching Tech Ventures
• Leadership Principles
• Leadership, Ethics, and Corporate Accountability
• Leading with Finance
• Management Essentials
• Negotiation Mastery
• Organizational Leadership
• Power and Influence for Positive Impact
• Strategy Execution
• Sustainable Business Strategy
• Sustainable Investing
• Winning with Digital Platforms

8 Steps in the Decision-Making Process

• 04 Feb 2020

Strong decision-making skills are essential for newly appointed and seasoned managers alike. The ability to navigate complex challenges and develop a plan can not only lead to more effective team management but drive key organizational change initiatives and objectives.

Despite decision-making’s importance in business, a recent survey by McKinsey shows that just 20 percent of professionals believe their organizations excel at it. Survey respondents noted that, on average, they spend 37 percent of their time making decisions, but more than half of it’s used ineffectively.

For managers, it’s critical to ensure effective decisions are made for their organizations’ success. Every managerial decision must be accompanied by research and data , collaboration, and alternative solutions.

Few managers, however, reap the benefits of making more thoughtful choices due to undeveloped decision-making models.

Access your free e-book today.

Why Is Making Decisions Important?

According to Harvard Business School Professor Leonard Schlesinger, who’s featured in the online course Management Essentials , most managers view decision-making as a single event, rather than a process. This can lead to managers overestimating their abilities to influence outcomes and closing themselves off from alternative perspectives and diverse ways of thinking.

“The reality is, it’s very rare to find a single point in time where ‘a decision of significance’ is made and things go forward from there,” Schlesinger says. “Embedded in this work is the notion that what we’re really talking about is a process. The role of the manager in managing that process is actually quite straightforward, yet, at the same time, extraordinarily complex.”

If you want to further your business knowledge and be more effective in your role, it’s critical to become a strong decision-maker. Here are eight steps in the decision-making process you can employ to become a better manager and have greater influence in your organization.

Steps in the Decision-Making Process

1. frame the decision.

Pinpointing the issue is the first step to initiating the decision-making process. Ensure the problem is carefully analyzed, clearly defined, and everyone involved in the outcome agrees on what needs to be solved. This process will give your team peace of mind that each key decision is based on extensive research and collaboration.

Schlesinger says this initial action can be challenging for managers because an ill-formed question can result in a process that produces the wrong decision.

“The real issue for a manager at the start is to make sure they are actively working to shape the question they’re trying to address and the decision they’re trying to have made,” Schlesinger says. “That’s not a trivial task.”

2. Structure Your Team

Managers must assemble the right people to navigate the decision-making process.

“The issue of who’s going to be involved in helping you to make that decision is one of the most central issues you face,” Schlesinger says. “The primary issue being the membership of the collection of individuals or group that you’re bringing together to make that decision.”

As you build your team, Schlesinger advises mapping the technical, political, and cultural underpinnings of the decision that needs to be made and gathering colleagues with an array of skills and experience levels to help you make an informed decision. .

“You want some newcomers who are going to provide a different point of view and perspective on the issue you’re dealing with,” he says. “At the same time, you want people who have profound knowledge and deep experience with the problem.”

It’s key to assign decision tasks to colleagues and invite perspectives that uncover blindspots or roadblocks. Schlesinger notes that attempting to arrive at the “right answer” without a team that will ultimately support and execute it is a “recipe for failure.”

3. Consider the Timeframe

This act of mapping the issue’s intricacies should involve taking the decision’s urgency into account. Business problems with significant implications sometimes allow for lengthier decision-making processes, whereas other challenges call for more accelerated timelines.

“As a manager, you need to shape the decision-making process in terms of both of those dimensions: The criticality of what it is you’re trying to decide and, more importantly, how quickly it needs to get decided given the urgency,” Schlesinger says. “The final question is, how much time you’re going to provide yourself and the group to invest in both problem diagnosis and decisions.”

4. Establish Your Approach

In the early stages of the decision-making process, it’s critical to set ground rules and assign roles to team members. Doing so can help ensure everyone understands how they contribute to problem-solving and agrees on how a solution will be reached.

“It’s really important to get clarity upfront around the roles people are going to play and the ways in which decisions are going to get made,” Schlesinger says. “Often, managers leave that to chance, so people self-assign themselves to roles in ways that you don’t necessarily want, and the decision-making process defers to consensus, which is likely to lead to a lower evaluation of the problem and a less creative solution.”

5. Encourage Discussion and Debate

One of the issues of leading a group that defaults to consensus is that it can shut out contrarian points of view and deter inventive problem-solving. Because of this potential pitfall, Schlesinger notes, you should designate roles that focus on poking holes in arguments and fostering debate.

“What we’re talking about is establishing a process of devil’s advocacy, either in an individual or a subgroup role,” he says. “That’s much more likely to lead to a deeper critical evaluation and generate a substantial number of alternatives.”

Schlesinger adds that this action can take time and potentially disrupt group harmony, so it’s vital for managers to guide the inner workings of the process from the outset to ensure effective collaboration and guarantee more quality decisions will be made.

“What we need to do is establish norms in the group that enable us to be open to a broader array of data and decision-making processes,” he says. “If that doesn’t happen upfront, but in the process without a conversation, it’s generally a source of consternation and some measure of frustration.”

Related: 3 Group Decision-Making Techniques for Success

6. Navigate Group Dynamics

In addition to creating a dynamic in which candor and debate are encouraged, there are other challenges you need to navigate as you manage your team throughout the decision-making process.

One is ensuring the size of the group is appropriate for the problem and allows for an efficient workflow.

“In getting all the people together that have relevant data and represent various political and cultural constituencies, each incremental member adds to the complexity of the decision-making process and the amount of time it takes to get a decision made and implemented,” Schlesinger says.

Another task, he notes, is identifying which parts of the process can be completed without face-to-face interaction.

“There’s no question that pieces of the decision-making process can be deferred to paper, email, or some app,” Schlesinger says. “But, at the end of the day, given that so much of decision-making requires high-quality human interaction, you need to defer some part of the process for ill-structured and difficult tasks to a face-to-face meeting.”

7. Ensure the Pieces Are in Place for Implementation

Throughout your team’s efforts to arrive at a decision, you must ensure you facilitate a process that encompasses:

• Shared goals that were presented upfront
• Alternative options that have been given rigorous thought and fair consideration
• Sound methods for exploring decisions’ consequences

According to Schlesinger, these components profoundly influence the quality of the solution that’s ultimately identified and the types of decisions that’ll be made in the future.

“In the general manager’s job, the quality of the decision is only one part of the equation,” he says. “All of this is oriented toward trying to make sure that once a decision is made, we have the right groupings and the right support to implement.”

8. Achieve Closure and Alignment

Achieving closure in the decision-making process requires arriving at a solution that sufficiently aligns members of your group and garners enough support to implement it.

As with the other phases of decision-making, clear communication ensures your team understands and commits to the plan.

In a video interview for the online course Management Essentials , Harvard Business School Dean Nitin Nohria says it’s essential to explain the rationale behind the decision to your employees.

“If it’s a decision that you have to make, say, ‘I know there were some of you who thought differently, but let me tell you why we went this way,’” Nohria says. “This is so the people on the other side feel heard and recognize the concerns they raised are things you’ve tried to incorporate into the decision and, as implementation proceeds, if those concerns become real, then they’ll be attended to.”

How to Improve Your Decision-Making

An in-depth understanding of the decision-making process is vital for all managers. Whether you’re an aspiring manager aiming to move up at your organization or a seasoned executive who wants to boost your job performance, honing your approach to decision-making can improve your managerial skills and equip you with the tools to advance your career.

Do you want to become a more effective decision-maker? Explore Management Essentials —one of our online leadership and management courses —to learn how you can influence the context and environment in which decisions get made.

This article was update on July 15, 2022. It was originally published on February 4, 2020.

About the Author

What is Problem Solving? (Steps, Techniques, Examples)

By Status.net Editorial Team on May 7, 2023 — 5 minutes to read

What Is Problem Solving?

Definition and importance.

Problem solving is the process of finding solutions to obstacles or challenges you encounter in your life or work. It is a crucial skill that allows you to tackle complex situations, adapt to changes, and overcome difficulties with ease. Mastering this ability will contribute to both your personal and professional growth, leading to more successful outcomes and better decision-making.

Problem-Solving Steps

The problem-solving process typically includes the following steps:

• Identify the issue : Recognize the problem that needs to be solved.
• Analyze the situation : Examine the issue in depth, gather all relevant information, and consider any limitations or constraints that may be present.
• Generate potential solutions : Brainstorm a list of possible solutions to the issue, without immediately judging or evaluating them.
• Evaluate options : Weigh the pros and cons of each potential solution, considering factors such as feasibility, effectiveness, and potential risks.
• Select the best solution : Choose the option that best addresses the problem and aligns with your objectives.
• Implement the solution : Put the selected solution into action and monitor the results to ensure it resolves the issue.
• Review and learn : Reflect on the problem-solving process, identify any improvements or adjustments that can be made, and apply these learnings to future situations.

Defining the Problem

To start tackling a problem, first, identify and understand it. Analyzing the issue thoroughly helps to clarify its scope and nature. Ask questions to gather information and consider the problem from various angles. Some strategies to define the problem include:

• Brainstorming with others
• Asking the 5 Ws and 1 H (Who, What, When, Where, Why, and How)
• Analyzing cause and effect
• Creating a problem statement

Generating Solutions

Once the problem is clearly understood, brainstorm possible solutions. Think creatively and keep an open mind, as well as considering lessons from past experiences. Consider:

• Creating a list of potential ideas to solve the problem
• Grouping and categorizing similar solutions
• Prioritizing potential solutions based on feasibility, cost, and resources required
• Involving others to share diverse opinions and inputs

Evaluating and Selecting Solutions

Evaluate each potential solution, weighing its pros and cons. To facilitate decision-making, use techniques such as:

• SWOT analysis (Strengths, Weaknesses, Opportunities, Threats)
• Decision-making matrices
• Pros and cons lists
• Risk assessments

After evaluating, choose the most suitable solution based on effectiveness, cost, and time constraints.

Implementing and Monitoring the Solution

Implement the chosen solution and monitor its progress. Key actions include:

• Communicating the solution to relevant parties
• Setting timelines and milestones
• Assigning tasks and responsibilities
• Monitoring the solution and making adjustments as necessary
• Evaluating the effectiveness of the solution after implementation

Utilize feedback from stakeholders and consider potential improvements. Remember that problem-solving is an ongoing process that can always be refined and enhanced.

Problem-Solving Techniques

During each step, you may find it helpful to utilize various problem-solving techniques, such as:

• Brainstorming : A free-flowing, open-minded session where ideas are generated and listed without judgment, to encourage creativity and innovative thinking.
• Root cause analysis : A method that explores the underlying causes of a problem to find the most effective solution rather than addressing superficial symptoms.
• SWOT analysis : A tool used to evaluate the strengths, weaknesses, opportunities, and threats related to a problem or decision, providing a comprehensive view of the situation.
• Mind mapping : A visual technique that uses diagrams to organize and connect ideas, helping to identify patterns, relationships, and possible solutions.

Brainstorming

When facing a problem, start by conducting a brainstorming session. Gather your team and encourage an open discussion where everyone contributes ideas, no matter how outlandish they may seem. This helps you:

• Generate a diverse range of solutions
• Encourage all team members to participate
• Foster creative thinking

When brainstorming, remember to:

• Reserve judgment until the session is over
• Encourage wild ideas
• Combine and improve upon ideas

Root Cause Analysis

For effective problem-solving, identifying the root cause of the issue at hand is crucial. Try these methods:

• 5 Whys : Ask “why” five times to get to the underlying cause.
• Fishbone Diagram : Create a diagram representing the problem and break it down into categories of potential causes.
• Pareto Analysis : Determine the few most significant causes underlying the majority of problems.

SWOT Analysis

SWOT analysis helps you examine the Strengths, Weaknesses, Opportunities, and Threats related to your problem. To perform a SWOT analysis:

• List your problem’s strengths, such as relevant resources or strong partnerships.
• Identify its weaknesses, such as knowledge gaps or limited resources.
• Explore opportunities, like trends or new technologies, that could help solve the problem.
• Recognize potential threats, like competition or regulatory barriers.

SWOT analysis aids in understanding the internal and external factors affecting the problem, which can help guide your solution.

Mind Mapping

A mind map is a visual representation of your problem and potential solutions. It enables you to organize information in a structured and intuitive manner. To create a mind map:

• Write the problem in the center of a blank page.
• Draw branches from the central problem to related sub-problems or contributing factors.
• Add more branches to represent potential solutions or further ideas.

Mind mapping allows you to visually see connections between ideas and promotes creativity in problem-solving.

Examples of Problem Solving in Various Contexts

In the business world, you might encounter problems related to finances, operations, or communication. Applying problem-solving skills in these situations could look like:

• Identifying areas of improvement in your company’s financial performance and implementing cost-saving measures
• Resolving internal conflicts among team members by listening and understanding different perspectives, then proposing and negotiating solutions
• Streamlining a process for better productivity by removing redundancies, automating tasks, or re-allocating resources

In educational contexts, problem-solving can be seen in various aspects, such as:

• Addressing a gap in students’ understanding by employing diverse teaching methods to cater to different learning styles
• Developing a strategy for successful time management to balance academic responsibilities and extracurricular activities
• Seeking resources and support to provide equal opportunities for learners with special needs or disabilities

Everyday life is full of challenges that require problem-solving skills. Some examples include:

• Overcoming a personal obstacle, such as improving your fitness level, by establishing achievable goals, measuring progress, and adjusting your approach accordingly
• Navigating a new environment or city by researching your surroundings, asking for directions, or using technology like GPS to guide you
• Dealing with a sudden change, like a change in your work schedule, by assessing the situation, identifying potential impacts, and adapting your plans to accommodate the change.
• How to Resolve Employee Conflict at Work [Steps, Tips, Examples]
• How to Write Inspiring Core Values? 5 Steps with Examples
• 30 Employee Feedback Examples (Positive & Negative)

• INTERPERSONAL SKILLS
• Decision-Making and Problem Solving

Search SkillsYouNeed:

Interpersonal Skills:

• A - Z List of Interpersonal Skills
• Interpersonal Skills Self-Assessment
• Communication Skills
• Emotional Intelligence
• Conflict Resolution and Mediation Skills
• Customer Service Skills
• Team-Working, Groups and Meetings

Decision-Making and Problem-Solving

• Effective Decision Making
• Decision-Making Framework
• Introduction to Problem Solving

Identifying and Structuring Problems

Investigating Ideas and Solutions

Implementing a Solution and Feedback

• Creative Problem-Solving

Social Problem-Solving

• Negotiation and Persuasion Skills
• Personal and Romantic Relationship Skills

Subscribe to our FREE newsletter and start improving your life in just 5 minutes a day.

You'll get our 5 free 'One Minute Life Skills' and our weekly newsletter.

We'll never share your email address and you can unsubscribe at any time.

The SkillsYouNeed Guide to Interpersonal Skills

Making decisions and solving problems are two key areas in life, whether you are at home or at work. Whatever you’re doing, and wherever you are, you are faced with countless decisions and problems, both small and large, every day.

Many decisions and problems are so small that we may not even notice them. Even small decisions, however, can be overwhelming to some people. They may come to a halt as they consider their dilemma and try to decide what to do.

Small and Large Decisions

In your day-to-day life you're likely to encounter numerous 'small decisions', including, for example:

Tea or coffee?

What shall I have in my sandwich? Or should I have a salad instead today?

What shall I wear today?

Larger decisions may occur less frequently but may include:

Should we repaint the kitchen? If so, what colour?

Should we relocate?

Should I propose to my partner? Do I really want to spend the rest of my life with him/her?

These decisions, and others like them, may take considerable time and effort to make.

The relationship between decision-making and problem-solving is complex. Decision-making is perhaps best thought of as a key part of problem-solving: one part of the overall process.

Our approach at Skills You Need is to set out a framework to help guide you through the decision-making process. You won’t always need to use the whole framework, or even use it at all, but you may find it useful if you are a bit ‘stuck’ and need something to help you make a difficult decision.

Decision Making

Effective Decision-Making

This page provides information about ways of making a decision, including basing it on logic or emotion (‘gut feeling’). It also explains what can stop you making an effective decision, including too much or too little information, and not really caring about the outcome.

A Decision-Making Framework

This page sets out one possible framework for decision-making.

The framework described is quite extensive, and may seem quite formal. But it is also a helpful process to run through in a briefer form, for smaller problems, as it will help you to make sure that you really do have all the information that you need.

Problem Solving

Introduction to Problem-Solving

This page provides a general introduction to the idea of problem-solving. It explores the idea of goals (things that you want to achieve) and barriers (things that may prevent you from achieving your goals), and explains the problem-solving process at a broad level.

The first stage in solving any problem is to identify it, and then break it down into its component parts. Even the biggest, most intractable-seeming problems, can become much more manageable if they are broken down into smaller parts. This page provides some advice about techniques you can use to do so.

Sometimes, the possible options to address your problem are obvious. At other times, you may need to involve others, or think more laterally to find alternatives. This page explains some principles, and some tools and techniques to help you do so.

Having generated solutions, you need to decide which one to take, which is where decision-making meets problem-solving. But once decided, there is another step: to deliver on your decision, and then see if your chosen solution works. This page helps you through this process.

‘Social’ problems are those that we encounter in everyday life, including money trouble, problems with other people, health problems and crime. These problems, like any others, are best solved using a framework to identify the problem, work out the options for addressing it, and then deciding which option to use.

This page provides more information about the key skills needed for practical problem-solving in real life.

Further Reading from Skills You Need

The Skills You Need Guide to Interpersonal Skills eBooks.

Develop your interpersonal skills with our series of eBooks. Learn about and improve your communication skills, tackle conflict resolution, mediate in difficult situations, and develop your emotional intelligence.

Guiding you through the key skills needed in life

As always at Skills You Need, our approach to these key skills is to provide practical ways to manage the process, and to develop your skills.

Neither problem-solving nor decision-making is an intrinsically difficult process and we hope you will find our pages useful in developing your skills.

Start with: Decision Making Problem Solving

See also: Improving Communication Interpersonal Communication Skills Building Confidence

Problem Solving and Decision Making - Two Essential Skills of a Good Leader

Problem solving and decision making are two fascinating skillsets. We call them out as two separate skills – and they are – but they also make use of the same core attributes.

They feed on a need to communicate well, both through questioning and listening, and be patient and not rushing both processes through. Thus, the greatest challenge any leader faces when it comes to solving problems and decision making is when the pressure of time comes into play. But as Robert Schuller highlights in his quote, allowing problem-solving to become the decision means you’ll never break free from the problem.

“Never bring the problem-solving stage into the decision-making stage. Otherwise, you surrender yourself to the problem rather than the solution.”—Robert H. Schuller

So how does a leader avoid this trap? How do they ensure the problem solving doesn’t become the be-all and end-all?

The 7 steps of Effective Problem Solving and Decision Making

A vital hurdle every leader must overcome is to avoid the impulsive urge to make quick decisions . Often when confronted with a problem, leaders or managers fall back in past behaviours. Urgency creates pressure to act quickly as a result, the problem still exists, just side-lined until it rears its ugly head again.

Good problem solving opens opportunity. A notable example of this is the first principles thinking executed by the likes of Elon Musk and others. Understanding the fundamentals blocks of a process and the problem it’s creating can lead to not just the problem but accelerate beyond it.

So, to avoid the trap, and use problem solving and decision making effectively , you should embody yourself with the following seven steps.

1.      What is the problem?

Often, especially in time-critical situations, people don’t define the problem. Some label themselves as fire-fighters, just content with dowsing out the flames. It is a reactionary behaviour and one commonplace with under-trained leaders. As great as some fire-fighters are, they can only put out so many fires at one time, often becoming a little industry.

The better approach is to define the problem, and this means asking the following questions:

• What is happening? ( What makes you think there is a problem?)
• Where is it taking place?
• How is it happening?
• When is it happening?
• Why is it happening?
• With whom is it happening? (This isn’t a blame game…all you want to do is isolate the problem to a granular level.)
• Define what you understand to be the problem in writing by using as few sentences as possible. (Look at the answers to your what, where, why, when, and how questions.)

2.      What are the potential causes?

Having defined the problem it is now time to find out what might be causing the problem. Your leadership skills: your communication skills need to be strong, as you look to gather input from your team and those involved in the problem.

Key points:

• Talk to those involved individually. Groupthink is a common cause of blindness to the problem, especially if there is blame culture within the business.
• Document what you’ve heard and what you think is the root cause is.
• Be inquisitive. You don’t know what you don’t know, so get the input of others and open yourself up to the feedback you’ll need to solve this problem.

3.      What other ways can you overcome the problem?

 Sometimes, getting to the root cause can take time. Of course, you can’t ignore it, but it is important to produce a plan to temporarily fix the problem. In business, a problem will be costing the business money, whether it be sales or profit. So, a temporary fix allows the business to move forward, providing it neutralises the downside of the original problem.

4.      How will you resolve the problem?

At this stage, you still don’t know what the actual problem is. All you have is a definition of the problem which is a diagnosis of the issue. You will have the team’s input, as well as your opinions as to what the next steps should be.

If you don’t, then at this stage you should think about reassessing the problem. One way forward could be to become more granular and adopt a first-principles approach.

• Break the problem down into its core parts
• What forms the foundational blocks of the system in operation?
• Ask powerful questions to get to the truth of the problem
• How do the parts fit together?
• What was the original purpose of the system working in this way?
• Name and separate your assumptions from the facts
• Remind yourself of the goal and create a new solution

Solve hard problems with inversion

Another way is to invert the problem using the following technique:

1. Understand the problem

Every solution starts with developing a clear understanding of what the problem is. In this instance, some clarity of the issue is vital.

2. Ask the opposite question

Convention wisdom means we see the world logically. But what if you turned the logical outcome on its head. Asking the opposite questions brings an unfamiliar perspective.

3. Answer the opposite question

It seems a simple logic, but you can’t just ask the opposite question and not answer it. You must think through the dynamics that come from asking the question. You're looking for alternative viewpoints and thoughts you've not had before.

4. Join your answers up with your original problem

This is where solutions are born. You’re taking your conventional wisdom and aligning it with the opposite perspective. So often the blockers seen in the original problem become part of the solution.

5.      Define a plan to either fix the problem permanently or temporarily

You now know the problem. You understand the fix, and you are a position to assess the risks involved.

Assessing the risks means considering the worst-case scenarios and ensuring you avoid them. Your plan should take into the following points:

• Is there any downtime to implementing the solution? If so, how long, and how much will it cost? Do you have backup systems in place to minimise the impact?
• If the risk is too great, consider a temporary fix which keeps current operations in place and gives you time to further prepare for a permanent fix.
• Document the plan and share it with all the relevant stakeholders. Communication is key.

Here we see the two skills of problem solving and decision making coming together. The two skills are vital to managing business risks as well as solving the problem.

6.      Monitor and measure the plan

Having evolved through the five steps to this stage, you mustn’t take your eye off the ball as it were.

• Define timelines and assess progress
• Report to the stakeholders, ensuring everyone is aware of progress or any delays.
• If the plan doesn’t deliver, ask why? Learn from failure.

7.      Have you fixed the problem?

Don’t forget the problem you started with. Have you fixed it? You might find it wasn’t a problem at all. You will have learnt a lot about the part of the business where the problem occurred, and improvements will have taken place.

Use the opportunity to assess what worked, what didn’t, and what would have helped. These are three good questions to give you some perspective on the process you’ve undertaken.

Problem solving and decision making in unison

Throughout the process of problem solving, you’re making decisions. Right from the beginning when the problem first becomes clear, you have a choice to either react – firefight or to investigate. This progresses as move onto risk assessing the problem and then defining the solutions to overcome the issue.

Throughout the process, the critical element is to make decisions with the correct information to hand. Finding out the facts, as well as defeating your assumptions are all part of the process of making the right decision.

Problem solving and decision making – a process 

Problem solving isn’t easy. It becomes even more challenging when you have decisions to make. The seven steps I’ve outlined will give you the ability to investigate and diagnose the problem correctly.

• What is the problem?
• What are the potential causes?
• What other ways can you overcome the problem?
• How will you resolve the problem?
• Define a plan to either fix the problem permanently or temporarily.
• Monitor and measure the plan.
• Have you fixed the problem?

Of course, this logical step by step process might not enable you to diagnose the issue at hand. Some problems can be extremely hard, and an alternative approach might help. In this instance, first principles thinking or using the power of inversion are excellent ways to dig into hard problems. Problem solving and decision making are two skills every good leader needs. Using them together is an effective way to work.

Become a Wiser Decision-Maker in Just 5 Minutes per Week.

Related Articles

How Thinking Like a Detective Will Improve Your Decisions

How Thinking in Patterns Will Make You Think Better

Fact-Based Decision Making: The Key to Making Progress as a Creator

How it works

For Business

Join Mind Tools

Article • 4 min read

The Problem-Solving Process

Looking at the basic problem-solving process to help keep you on the right track.

By the Mind Tools Content Team

Problem-solving is an important part of planning and decision-making. The process has much in common with the decision-making process, and in the case of complex decisions, can form part of the process itself.

We face and solve problems every day, in a variety of guises and of differing complexity. Some, such as the resolution of a serious complaint, require a significant amount of time, thought and investigation. Others, such as a printer running out of paper, are so quickly resolved they barely register as a problem at all.

Despite the everyday occurrence of problems, many people lack confidence when it comes to solving them, and as a result may chose to stay with the status quo rather than tackle the issue. Broken down into steps, however, the problem-solving process is very simple. While there are many tools and techniques available to help us solve problems, the outline process remains the same.

The main stages of problem-solving are outlined below, though not all are required for every problem that needs to be solved.

1. Define the Problem

Clarify the problem before trying to solve it. A common mistake with problem-solving is to react to what the problem appears to be, rather than what it actually is. Write down a simple statement of the problem, and then underline the key words. Be certain there are no hidden assumptions in the key words you have underlined. One way of doing this is to use a synonym to replace the key words. For example, ‘We need to encourage higher productivity ’ might become ‘We need to promote superior output ’ which has a different meaning.

2. Analyze the Problem

Ask yourself, and others, the following questions.

• Where is the problem occurring?
• When is it occurring?
• Why is it happening?

Be careful not to jump to ‘who is causing the problem?’. When stressed and faced with a problem it is all too easy to assign blame. This, however, can cause negative feeling and does not help to solve the problem. As an example, if an employee is underperforming, the root of the problem might lie in a number of areas, such as lack of training, workplace bullying or management style. To assign immediate blame to the employee would not therefore resolve the underlying issue.

Once the answers to the where, when and why have been determined, the following questions should also be asked:

• Where can further information be found?
• Is this information correct, up-to-date and unbiased?
• What does this information mean in terms of the available options?

3. Generate Potential Solutions

When generating potential solutions it can be a good idea to have a mixture of ‘right brain’ and ‘left brain’ thinkers. In other words, some people who think laterally and some who think logically. This provides a balance in terms of generating the widest possible variety of solutions while also being realistic about what can be achieved. There are many tools and techniques which can help produce solutions, including thinking about the problem from a number of different perspectives, and brainstorming, where a team or individual write as many possibilities as they can think of to encourage lateral thinking and generate a broad range of potential solutions.

4. Select Best Solution

When selecting the best solution, consider:

• Is this a long-term solution, or a ‘quick fix’?
• Is the solution achievable in terms of available resources and time?
• Are there any risks associated with the chosen solution?
• Could the solution, in itself, lead to other problems?

This stage in particular demonstrates why problem-solving and decision-making are so closely related.

5. Take Action

In order to implement the chosen solution effectively, consider the following:

• What will the situation look like when the problem is resolved?
• What needs to be done to implement the solution? Are there systems or processes that need to be adjusted?
• What will be the success indicators?
• What are the timescales for the implementation? Does the scale of the problem/implementation require a project plan?
• Who is responsible?

Once the answers to all the above questions are written down, they can form the basis of an action plan.

6. Monitor and Review

One of the most important factors in successful problem-solving is continual observation and feedback. Use the success indicators in the action plan to monitor progress on a regular basis. Is everything as expected? Is everything on schedule? Keep an eye on priorities and timelines to prevent them from slipping.

If the indicators are not being met, or if timescales are slipping, consider what can be done. Was the plan realistic? If so, are sufficient resources being made available? Are these resources targeting the correct part of the plan? Or does the plan need to be amended? Regular review and discussion of the action plan is important so small adjustments can be made on a regular basis to help keep everything on track.

Once all the indicators have been met and the problem has been resolved, consider what steps can now be taken to prevent this type of problem recurring? It may be that the chosen solution already prevents a recurrence, however if an interim or partial solution has been chosen it is important not to lose momentum.

Problems, by their very nature, will not always fit neatly into a structured problem-solving process. This process, therefore, is designed as a framework which can be adapted to individual needs and nature.

Join Mind Tools and get access to exclusive content.

This resource is only available to Mind Tools members.

Already a member? Please Login here

Get 30% off your first year of Mind Tools

Great teams begin with empowered leaders. Our tools and resources offer the support to let you flourish into leadership. Join today!

Sign-up to our newsletter

Subscribing to the Mind Tools newsletter will keep you up-to-date with our latest updates and newest resources.

Subscribe now

Business Skills

Personal Development

Leadership and Management

Member Extras

Most Popular

Latest Updates

The Role of a Facilitator

How to Manage Passive-Aggressive People

Mind Tools Store

About Mind Tools Content

Discover something new today

How can i manage passive-aggressive team members.

Dealing with passive aggression when it takes over your team

Written Communication

Discover how to construct an effective message, and test and hone your writing skills

How Emotionally Intelligent Are You?

Boosting Your People Skills

Self-Assessment

What's Your Leadership Style?

Learn About the Strengths and Weaknesses of the Way You Like to Lead

Recommended for you

Make it, don't fake it.

With Sabrina Horn

Expert Interviews

Business Operations and Process Management

Strategy Tools

Customer Service

Business Ethics and Values

Handling Information and Data

Project Management

Knowledge Management

Self-Development and Goal Setting

Time Management

Presentation Skills

Learning Skills

Career Skills

Communication Skills

Negotiation, Persuasion and Influence

Working With Others

Difficult Conversations

Creativity Tools

Self-Management

Work-Life Balance

Stress Management and Wellbeing

Coaching and Mentoring

Change Management

Team Management

Managing Conflict

Delegation and Empowerment

Performance Management

Leadership Skills

Developing Your Team

Talent Management

Problem Solving

Decision Making

Member Podcast

Master the 7-Step Problem-Solving Process for Better Decision-Making

Discover the powerful 7-Step Problem-Solving Process to make better decisions and achieve better outcomes. Master the art of problem-solving in this comprehensive guide. Download the Free PowerPoint and PDF Template.

StrategyPunk

Introduction.

Mastering the art of problem-solving is crucial for making better decisions. Whether you're a student, a business owner, or an employee, problem-solving skills can help you tackle complex issues and find practical solutions. The 7-Step Problem-Solving Process is a proven method that can help you approach problems systematically and efficiently.

The 7-Step Problem-Solving Process involves steps that guide you through the problem-solving process. The first step is to define the problem, followed by disaggregating the problem into smaller, more manageable parts. Next, you prioritize the features and create a work plan to address each. Then, you analyze each piece, synthesize the information, and communicate your findings to others.

By following this process, you can avoid jumping to conclusions, overlooking important details, or making hasty decisions. Instead, you can approach problems with a clear and structured mindset, which can help you make better decisions and achieve better outcomes.

In this article, we'll explore each step of the 7-Step Problem-Solving Process in detail so you can start mastering this valuable skill. At the end of the blog post, you can download the process's free PowerPoint and PDF templates .

Step 1: Define the Problem

The first step in the problem-solving process is to define the problem. This step is crucial because finding a solution is only accessible if the problem is clearly defined. The problem must be specific, measurable, and achievable.

One way to define the problem is to ask the right questions. Questions like "What is the problem?" and "What are the causes of the problem?" can help. Gathering data and information about the issue to assist in the definition process is also essential.

Another critical aspect of defining the problem is identifying the stakeholders. Who is affected by it? Who has a stake in finding a solution? Identifying the stakeholders can help ensure that the problem is defined in a way that considers the needs and concerns of all those affected.

Once the problem is defined, it is essential to communicate the definition to all stakeholders. This helps to ensure that everyone is on the same page and that there is a shared understanding of the problem.

Step 2: Disaggregate

After defining the problem, the next step in the 7-step problem-solving process is to disaggregate the problem into smaller, more manageable parts. Disaggregation helps break down the problem into smaller pieces that can be analyzed individually. This step is crucial in understanding the root cause of the problem and identifying the most effective solutions.

Disaggregation can be achieved by breaking down the problem into sub-problems, identifying the contributing factors, and analyzing the relationships between these factors. This step helps identify the most critical factors that must be addressed to solve the problem.

A tree or fishbone diagram is one effective way to disaggregate a problem. These diagrams help identify the different factors contributing to the problem and how they are related. Another way is to use a table to list the other factors contributing to the situation and their corresponding impact on the issue.

Disaggregation helps in breaking down complex problems into smaller, more manageable parts. It helps understand the relationships between different factors contributing to the problem and identify the most critical factors that must be addressed. By disaggregating the problem, decision-makers can focus on the most vital areas, leading to more effective solutions.

Step 3: Prioritize

After defining the problem and disaggregating it into smaller parts, the next step in the 7-step problem-solving process is prioritizing the issues that need addressing. Prioritizing helps to focus on the most pressing issues and allocate resources more effectively.

There are several ways to prioritize issues, including:

• Urgency: Prioritize issues based on their urgency. Problems that require immediate attention should be addressed first.
• Impact: Prioritize issues based on their impact on the organization or stakeholders. Problems with a high impact should be given priority.
• Resources: Prioritize issues based on the resources required to address them. Problems that require fewer resources should be dealt with first.

It is important to involve stakeholders in the prioritization process, considering their concerns and needs. This can be done through surveys, focus groups, or other forms of engagement.

Once the issues have been prioritized, developing a plan of action to address them is essential. This involves identifying the resources required, setting timelines, and assigning responsibilities.

Prioritizing issues is a critical step in problem-solving. By focusing on the most pressing problems, organizations can allocate resources more effectively and make better decisions.

Step 4: Workplan

After defining the problem, disaggregating, and prioritizing the issues, the next step in the 7-step problem-solving process is to develop a work plan. This step involves creating a roadmap that outlines the steps needed to solve the problem.

The work plan should include a list of tasks, deadlines, and responsibilities for each team member involved in the problem-solving process. Assigning tasks based on each team member's strengths and expertise ensures the work is completed efficiently and effectively.

Creating a work plan can help keep the team on track and ensure everyone is working towards the same goal. It can also help to identify potential roadblocks or challenges that may arise during the problem-solving process and develop contingency plans to address them.

Several tools and techniques can be used to develop a work plan, including Gantt charts, flowcharts, and mind maps. These tools can help to visualize the steps needed to solve the problem and identify dependencies between tasks.

Developing a work plan is a critical step in the problem-solving process. It provides a clear roadmap for solving the problem and ensures everyone involved is aligned and working towards the same goal.

Step 5: Analysis

Once the problem has been defined and disaggregated, the next step is to analyze the information gathered. This step involves examining the data, identifying patterns, and determining the root cause of the problem.

Several methods can be used during the analysis phase, including:

• Root cause analysis
• Pareto analysis
• SWOT analysis

Root cause analysis is a popular method used to identify the underlying cause of a problem. This method involves asking a series of "why" questions to get to the root cause of the issue.

Pareto analysis is another method that can be used during the analysis phase. This method involves identifying the 20% of causes responsible for 80% of the problems. By focusing on these critical causes, organizations can make significant improvements.

Finally, SWOT analysis is a valuable tool for analyzing the internal and external factors that may impact the problem. This method involves identifying the strengths, weaknesses, opportunities, and threats related to the issue.

Overall, the analysis phase is critical for identifying the root cause of the problem and developing practical solutions. By using a combination of methods, organizations can gain a deeper understanding of the issue and make informed decisions.

Step 6: Synthesize

Once the analysis phase is complete, it is time to synthesize the information gathered to arrive at a solution. During this step, the focus is on identifying the most viable solution that addresses the problem. This involves examining and combining the analysis results for a clear and concise conclusion.

One way to synthesize the information is to use a decision matrix. This involves creating a table that lists the potential solutions and the essential criteria for making a decision. Each answer is then rated against each standard, and the scores are tallied to arrive at a final decision.

Another approach to synthesizing the information is to use a mind map. This involves creating a visual representation of the problem and the potential solutions. The mind map can identify the relationships between the different pieces of information and help prioritize the solutions.

During the synthesis phase, it is vital to remain open-minded and consider all potential solutions. Involving all stakeholders in the decision-making process is essential to ensure everyone's perspectives are considered.

Step 7: Communicate

After synthesizing the information, the next step is communicating the findings to the relevant stakeholders. This is a crucial step because it helps to ensure that everyone is on the same page and that the decision-making process is transparent.

One effective way to communicate the findings is through a well-organized report. The report should include the problem statement, the analysis, the synthesis, and the recommended solution. It should be clear, concise, and easy to understand.

In addition to the report, a presentation explaining the findings is essential. The presentation should be tailored to the audience and highlight the report's key points. Visual aids such as tables, graphs, and charts can make the presentation more engaging.

During the presentation, it is essential to be open to feedback and questions from the audience. This helps ensure everyone agrees with the recommended solution and addresses concerns or objections.

Effective communication is vital to ensuring the decision-making process is successful. Stakeholders can make informed decisions and work towards a common goal by communicating the findings clearly and concisely.

The 7-step problem-solving process is a powerful tool for helping individuals and organizations make better decisions. By following these steps, individuals can identify the root cause of a problem, prioritize potential solutions, and develop a clear plan of action. This process can be applied to various scenarios, from personal challenges to complex business problems.

Through disaggregation, individuals can break down complex problems into smaller, more manageable parts. By prioritizing potential solutions, individuals can focus their efforts on the most impactful actions. The work step allows individuals to develop a clear action plan, while the analysis step provides a framework for evaluating possible solutions.

The synthesis step combines all the information gathered to develop a comprehensive solution. Finally, the communication step allows individuals to share their answers with others and gather feedback.

By mastering the 7-step problem-solving process, individuals can become more effective decision-makers and problem-solvers. This process can help individuals and organizations save time and resources while improving outcomes. With practice, individuals can develop the skills to apply this process to a wide range of scenarios and make better decisions in all areas of life.

7-Step Problem-Solving Process PPT Template

Free powerpoint and pdf template, executive summary: the 7-step problem-solving process.

The 7-Step Problem-Solving Process is a robust and systematic method to help individuals and organizations make better decisions by tackling complex issues and finding practical solutions. This process comprises defining the problem, disaggregating it into smaller parts, prioritizing the issues, creating a work plan, analyzing the data, synthesizing the information, and communicating the findings.

By following these steps, individuals can identify the root cause of a problem, break it down into manageable components, and prioritize the most impactful actions. The work plan, analysis, and synthesis steps provide a framework for developing comprehensive solutions, while the communication step ensures transparency and stakeholder engagement.

Mastering this process can improve decision-making and problem-solving capabilities, save time and resources, and improve outcomes in personal and professional contexts.

Please buy me a coffee.

I'd appreciate your support if my templates have saved you time or helped you start a project. Buy Me a Coffee is a simple way to show your appreciation and help me continue creating high-quality templates that meet your needs.

7-Step Problem-Solving Process PDF Template

7-step problem-solving process powerpoint template, global bites: pestle insights into nestlé (free ppt).

Download our free PPT template for in-depth PESTLE insights into Nestlé's global strategy. Learn more today!

PESTLE Analysis: Decoding Reddit's Landscape (Free PPT)

Decode Reddit's global influence with our free PowerPoint PESTLE Analysis. Explore the hub of vibrant discussions and ideas.

Navigating the Terrain: A PESTLE Analysis of Lululemon (Free PowerPoint)

Explore Lululemon's business terrain with our free PESTLE analysis PowerPoint. Instant access!

The Art of Strategic Leadership: 5 Keys to Success by Willie Peterson

Explore Willie Peterson's 5 crucial strategies for strategic leadership. Master learning, customer focus, and effective storytelling.

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

Overview of the Problem-Solving Mental Process

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Rachel Goldman, PhD FTOS, is a licensed psychologist, clinical assistant professor, speaker, wellness expert specializing in eating behaviors, stress management, and health behavior change.

• Identify the Problem
• Define the Problem
• Form a Strategy
• Organize Information
• Allocate Resources
• Monitor Progress
• Evaluate the Results

Frequently Asked Questions

Problem-solving is a mental process that involves discovering, analyzing, and solving problems. The ultimate goal of problem-solving is to overcome obstacles and find a solution that best resolves the issue.

The best strategy for solving a problem depends largely on the unique situation. In some cases, people are better off learning everything they can about the issue and then using factual knowledge to come up with a solution. In other instances, creativity and insight are the best options.

It is not necessary to follow problem-solving steps sequentially, It is common to skip steps or even go back through steps multiple times until the desired solution is reached.

In order to correctly solve a problem, it is often important to follow a series of steps. Researchers sometimes refer to this as the problem-solving cycle. While this cycle is portrayed sequentially, people rarely follow a rigid series of steps to find a solution.

The following steps include developing strategies and organizing knowledge.

1. Identifying the Problem

While it may seem like an obvious step, identifying the problem is not always as simple as it sounds. In some cases, people might mistakenly identify the wrong source of a problem, which will make attempts to solve it inefficient or even useless.

Some strategies that you might use to figure out the source of a problem include :

• Asking questions about the problem
• Breaking the problem down into smaller pieces
• Looking at the problem from different perspectives
• Conducting research to figure out what relationships exist between different variables

2. Defining the Problem

After the problem has been identified, it is important to fully define the problem so that it can be solved. You can define a problem by operationally defining each aspect of the problem and setting goals for what aspects of the problem you will address

At this point, you should focus on figuring out which aspects of the problems are facts and which are opinions. State the problem clearly and identify the scope of the solution.

3. Forming a Strategy

After the problem has been identified, it is time to start brainstorming potential solutions. This step usually involves generating as many ideas as possible without judging their quality. Once several possibilities have been generated, they can be evaluated and narrowed down.

The next step is to develop a strategy to solve the problem. The approach used will vary depending upon the situation and the individual's unique preferences. Common problem-solving strategies include heuristics and algorithms.

• Heuristics are mental shortcuts that are often based on solutions that have worked in the past. They can work well if the problem is similar to something you have encountered before and are often the best choice if you need a fast solution.
• Algorithms are step-by-step strategies that are guaranteed to produce a correct result. While this approach is great for accuracy, it can also consume time and resources.

Heuristics are often best used when time is of the essence, while algorithms are a better choice when a decision needs to be as accurate as possible.

4. Organizing Information

Before coming up with a solution, you need to first organize the available information. What do you know about the problem? What do you not know? The more information that is available the better prepared you will be to come up with an accurate solution.

When approaching a problem, it is important to make sure that you have all the data you need. Making a decision without adequate information can lead to biased or inaccurate results.

5. Allocating Resources

Of course, we don't always have unlimited money, time, and other resources to solve a problem. Before you begin to solve a problem, you need to determine how high priority it is.

If it is an important problem, it is probably worth allocating more resources to solving it. If, however, it is a fairly unimportant problem, then you do not want to spend too much of your available resources on coming up with a solution.

At this stage, it is important to consider all of the factors that might affect the problem at hand. This includes looking at the available resources, deadlines that need to be met, and any possible risks involved in each solution. After careful evaluation, a decision can be made about which solution to pursue.

6. Monitoring Progress

After selecting a problem-solving strategy, it is time to put the plan into action and see if it works. This step might involve trying out different solutions to see which one is the most effective.

It is also important to monitor the situation after implementing a solution to ensure that the problem has been solved and that no new problems have arisen as a result of the proposed solution.

Effective problem-solvers tend to monitor their progress as they work towards a solution. If they are not making good progress toward reaching their goal, they will reevaluate their approach or look for new strategies .

7. Evaluating the Results

After a solution has been reached, it is important to evaluate the results to determine if it is the best possible solution to the problem. This evaluation might be immediate, such as checking the results of a math problem to ensure the answer is correct, or it can be delayed, such as evaluating the success of a therapy program after several months of treatment.

Once a problem has been solved, it is important to take some time to reflect on the process that was used and evaluate the results. This will help you to improve your problem-solving skills and become more efficient at solving future problems.

A Word From Verywell​

It is important to remember that there are many different problem-solving processes with different steps, and this is just one example. Problem-solving in real-world situations requires a great deal of resourcefulness, flexibility, resilience, and continuous interaction with the environment.

Get Advice From The Verywell Mind Podcast

Hosted by therapist Amy Morin, LCSW, this episode of The Verywell Mind Podcast shares how you can stop dwelling in a negative mindset.

Follow Now : Apple Podcasts / Spotify / Google Podcasts

You can become a better problem solving by:

• Practicing brainstorming and coming up with multiple potential solutions to problems
• Being open-minded and considering all possible options before making a decision
• Breaking down problems into smaller, more manageable pieces
• Asking for help when needed
• Researching different problem-solving techniques and trying out new ones
• Learning from mistakes and using them as opportunities to grow

It's important to communicate openly and honestly with your partner about what's going on. Try to see things from their perspective as well as your own. Work together to find a resolution that works for both of you. Be willing to compromise and accept that there may not be a perfect solution.

Take breaks if things are getting too heated, and come back to the problem when you feel calm and collected. Don't try to fix every problem on your own—consider asking a therapist or counselor for help and insight.

If you've tried everything and there doesn't seem to be a way to fix the problem, you may have to learn to accept it. This can be difficult, but try to focus on the positive aspects of your life and remember that every situation is temporary. Don't dwell on what's going wrong—instead, think about what's going right. Find support by talking to friends or family. Seek professional help if you're having trouble coping.

Davidson JE, Sternberg RJ, editors.  The Psychology of Problem Solving .  Cambridge University Press; 2003. doi:10.1017/CBO9780511615771

Sarathy V. Real world problem-solving .  Front Hum Neurosci . 2018;12:261. Published 2018 Jun 26. doi:10.3389/fnhum.2018.00261

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

• SUGGESTED TOPICS
• The Magazine
• Newsletters
• Managing Yourself
• Managing Teams
• Work-life Balance
• The Big Idea
• Data & Visuals
• Reading Lists
• Case Selections
• HBR Learning
• Topic Feeds
• Account Settings
• Email Preferences

How to Make Great Decisions, Quickly

• Martin G. Moore

It’s a skill that will set you apart.

As a new leader, learning to make good decisions without hesitation and procrastination is a capability that can set you apart from your peers. While others vacillate on tricky choices, your team could be hitting deadlines and producing the type of results that deliver true value. That’s something that will get you — and them — noticed. Here are a few of a great decision:

• Great decisions are shaped by consideration of many different viewpoints. This doesn’t mean you should seek out everyone’s opinion. The right people with the relevant expertise need to clearly articulate their views to help you broaden your perspective and make the best choice.
• Great decisions are made as close as possible to the action. Remember that the most powerful people at your company are rarely on the ground doing the hands-on work. Seek input and guidance from team members who are closest to the action.
• Great decisions address the root cause, not just the symptoms. Although you may need to urgently address the symptoms, once this is done you should always develop a plan to fix the root cause, or else the problem is likely to repeat itself.
• Great decisions balance short-term and long-term value. Finding the right balance between short-term and long-term risks and considerations is key to unlocking true value.
• Great decisions are timely. If you consider all of the elements listed above, then it’s simply a matter of addressing each one with a heightened sense of urgency.

Where your work meets your life. See more from Ascend here .

Like many young leaders, early in my career, I thought a great decision was one that attracted widespread approval. When my colleagues smiled and nodded their collective heads, it reinforced (in my mind, at least) that I was an excellent decision maker.

• MM Martin G. Moore is the founder of Your CEO Mentor and author of No Bullsh!t Leadership and host of the No Bullsh!t Leadership podcast. His purpose is to improve the quality of leaders globally through practical, real world leadership content. For more information, please visit, www.martingmoore.com.

Partner Center

Problem Solving And Decision Making: 10 Hacks That Managers Love

Understanding problem solving & decision making, why are problem solving and decision making skills essential in the workplace, five techniques for effective problem solving, five techniques for effective decision making, frequently asked questions.

Other Related Blogs

• Improved efficiency and productivity: Employees with strong problem solving and decision making skills are better equipped to identify and solve issues that may arise in their work. This leads to improved efficiency and productivity as they can complete their work more timely and effectively.
• Improved customer satisfaction: Problem solving and decision making skills also help employees address any concerns or issues customers may have. This leads to enhanced customer satisfaction as customers feel their needs are being addressed and their problems are resolved.
• Effective teamwork: When working in teams, problem solving and decision making skills are essential for effective collaboration . Groups that can effectively identify and solve problems together are more likely to successfully achieve their goals.
• Innovation: Effective problem-solving and decision-making skills are also crucial for driving innovation in the workplace. Employees who think creatively and develop new solutions to problems are more likely to develop innovative ideas to move the business forward.
• Risk management: Problem solving and decision making skills are also crucial for managing risk in the workplace. By identifying potential risks and developing strategies to mitigate them, employees can help minimize the negative impact of risks on the business.

• Brainstorming: Brainstorming is a technique for generating creative ideas and solutions to problems. In a brainstorming session, a group of people share their thoughts and build on each other’s suggestions. The goal is to generate a large number of ideas in a short amount of time. For example, a team of engineers could use brainstorming to develop new ideas for improving the efficiency of a manufacturing process.
• Root Cause Analysis: Root cause analysis is a technique for identifying the underlying cause of a problem. It involves asking “why” questions to uncover the root cause of the problem. Once the root cause is identified, steps can be taken to address it. For example, a hospital could use root cause analysis to investigate why patient falls occur and identify the root cause, such as inadequate staffing or poor lighting.
• SWOT Analysis: SWOT analysis is a technique for evaluating the strengths, weaknesses, opportunities, and threats related to a problem or situation. It involves assessing internal and external factors that could impact the problem and identifying ways to leverage strengths and opportunities while minimizing weaknesses and threats. For example, a small business could use SWOT analysis to evaluate its market position and identify opportunities to expand its product line or improve its marketing.
• Pareto Analysis: Pareto analysis is a technique for identifying the most critical problems to address. It involves ranking problems by impact and frequency and first focusing on the most significant issues. For example, a software development team could use Pareto analysis to prioritize bugs and issues to fix based on their impact on the user experience.
• Decision Matrix Analysis: Decision matrix analysis evaluates alternatives and selects the best course of action. It involves creating a matrix to compare options based on criteria and weighting factors and selecting the option with the highest score. For example, a manager could use decision matrix analysis to evaluate different software vendors based on criteria such as price, features, and support and select the vendor with the best overall score.

• Cost-Benefit Analysis: Cost-benefit analysis is a technique for evaluating the costs and benefits of different options. It involves comparing each option’s expected costs and benefits and selecting the one with the highest net benefit. For example, a company could use cost-benefit analysis to evaluate a new product line’s potential return on investment.
• Decision Trees: Decision trees are a visual representation of the decision-making process. They involve mapping out different options and their potential outcomes and probabilities. This helps to identify the best course of action based on the likelihood of different outcomes. For example, a farmer could use a decision tree to choose crops to plant based on the expected weather patterns.
• SWOT Analysis: SWOT analysis can also be used for decision making. By identifying the strengths, weaknesses, opportunities, and threats of different options, a decision maker can evaluate each option’s potential risks and benefits. For example, a business owner could use SWOT analysis to assess the potential risks and benefits of expanding into a new market.
• Pros and Cons Analysis: Pros and cons analysis lists the advantages and disadvantages of different options. It involves weighing the pros and cons of each option to determine the best course of action. For example, an individual could use a pros and cons analysis to decide whether to take a job offer.
• Six Thinking Hats: The six thinking hats technique is a way to think about a problem from different perspectives. It involves using six different “hats” to consider various aspects of the decision. The hats include white (facts and figures), red (emotions and feelings), black (risks and drawbacks), yellow (benefits and opportunities), green (creativity and new ideas), and blue (overview and control). For example, a team could use the six thinking hats technique to evaluate different options for a marketing campaign.

Aastha Bensla

Aastha, a passionate industrial psychologist, writer, and counselor, brings her unique expertise to Risely. With specialized knowledge in industrial psychology, Aastha offers a fresh perspective on personal and professional development. Her broad experience as an industrial psychologist enables her to accurately understand and solve problems for managers and leaders with an empathetic approach.

How strong are your decision making skills?

Find out now with the help of Risely’s free assessment for leaders and team managers.

How are problem solving and decision making related?

What is a good example of decision-making, what are the steps in problem-solving and decision-making.

6 Best Books On Decision Making For Managers

Best decision coaches to guide you toward great choices, top 10 games for negotiation skills to make you a better leader, 9 tips to master the art of delegation for managers.

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons

Margin Size

• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

5.3: Using Critical Thinking Skills- Decision Making and Problem Solving

• Last updated
• Save as PDF
• Page ID 24260

• Get started with computers
• Learn Microsoft Office
• Apply for a job
• Improve my work skills
• Design nice-looking docs
• Getting Started
• Smartphones & Tablets
• Typing Tutorial
• Online Learning
• Basic Internet Skills
• Online Safety
• Social Media
• Zoom Basics
• Google Docs
• Google Sheets
• Career Planning
• Resume Writing
• Cover Letters
• Job Search and Networking
• Business Communication
• Entrepreneurship 101
• Careers without College
• Job Hunt for Today
• 3D Printing
• Freelancing 101
• Personal Finance
• Sharing Economy
• Decision-Making
• Graphic Design
• Photography
• Image Editing
• Learning WordPress
• Language Learning
• Critical Thinking
• For Educators
• Translations
• Staff Picks
• English expand_more expand_less

Critical Thinking and Decision-Making  - What is Critical Thinking?

Critical thinking and decision-making  -, what is critical thinking, critical thinking and decision-making what is critical thinking.

Critical Thinking and Decision-Making: What is Critical Thinking?

Lesson 1: what is critical thinking, what is critical thinking.

Critical thinking is a term that gets thrown around a lot. You've probably heard it used often throughout the years whether it was in school, at work, or in everyday conversation. But when you stop to think about it, what exactly is critical thinking and how do you do it ?

Watch the video below to learn more about critical thinking.

Simply put, critical thinking is the act of deliberately analyzing information so that you can make better judgements and decisions . It involves using things like logic, reasoning, and creativity, to draw conclusions and generally understand things better.

This may sound like a pretty broad definition, and that's because critical thinking is a broad skill that can be applied to so many different situations. You can use it to prepare for a job interview, manage your time better, make decisions about purchasing things, and so much more.

The process

As humans, we are constantly thinking . It's something we can't turn off. But not all of it is critical thinking. No one thinks critically 100% of the time... that would be pretty exhausting! Instead, it's an intentional process , something that we consciously use when we're presented with difficult problems or important decisions.

Improving your critical thinking

In order to become a better critical thinker, it's important to ask questions when you're presented with a problem or decision, before jumping to any conclusions. You can start with simple ones like What do I currently know? and How do I know this? These can help to give you a better idea of what you're working with and, in some cases, simplify more complex issues.  

Real-world applications

Let's take a look at how we can use critical thinking to evaluate online information . Say a friend of yours posts a news article on social media and you're drawn to its headline. If you were to use your everyday automatic thinking, you might accept it as fact and move on. But if you were thinking critically, you would first analyze the available information and ask some questions :

• What's the source of this article?
• Is the headline potentially misleading?
• What are my friend's general beliefs?
• Do their beliefs inform why they might have shared this?

After analyzing all of this information, you can draw a conclusion about whether or not you think the article is trustworthy.

Critical thinking has a wide range of real-world applications . It can help you to make better decisions, become more hireable, and generally better understand the world around you.

/en/problem-solving-and-decision-making/why-is-it-so-hard-to-make-decisions/content/

Making the Difference: Problem Solving vs Decision Making

This blog is reader-supported. When you purchase something through an affiliate link on this site, I may earn some coffee money. Thanks! Learn more .

Do you ever find yourself stuck between a rock and hard place, unable to decide what the best course of action is?

I have. Whether it’s what desk to put in our new conservatory space (and I’ll tell you what we ended up deciding later), or who to invite to meetings, or managing to order everyone else’s food and then getting so overwhelmed with having made decisions all day for all the people that I couldn’t choose anything for myself.

I left the café with nothing for me and ended up with a couple of slices of peanut butter toast at home.

Making decisions can be difficult for even the most experienced project managers. But before making any decision, it’s important to understand the difference between problem solving and decision making.

Ready to get into it?

Problem solving involves diagnosing issues that arise during projects while decision making requires taking appropriate steps based on those diagnoses. While they may appear similar at first glance, there are key differences in how each process should be approached – understanding these differences will help you make more informed decisions!

Let’s explore both processes as well as their similarities and differences.

What is problem solving?

You’ve been solving problems since you were a baby: how to stand up, how to get your socks off, how to get your parents to bring you your favorite sippy cup.

As an adult, we solve problems every day at work and at home.

So it probably sounds a bit odd to want to define problem solving before we go any further. Surely we all know what we are talking about as we do it all the time?

Humor me. Problem solving is the process of identifying and analyzing a problem, generating potential solutions, and selecting the best solution to address the issue. It involves breaking down complex problems into smaller components and then finding ways to solve them.

The problem solving process

If you think that description sounds linear, then you’d be right. Problem solving fits neatly into a process, one that we don’t even know we’re following most of the time.

The problem solving process typically consists of four steps:

• Identify the problem
• Generate possible solutions
• Evaluate each option
• Select an appropriate course of action.

That does make it sound easy. Wicked problems need a slightly different approach (PMI has a problem solving training course that is brilliant and will help with that).

But for now, let’s stick with a high-level approach that works for most problems.

1. Identify the problem

First, it’s important to understand what caused the issue in order to determine how best to resolve it.

You’d be surprised at how many managers don’t bother to find the root cause of the problem to truly understand it. Use techniques like the 5 Whys or an Ishikawa diagram to dig down into what the problem actually is.

2. Generate possible solutions

Brainstorming is one way to come up with different ideas for potential solutions. You could also interview experts, review lessons learned or innovative solutions from previous projects, research what the rest of your industry is doing or consult customers on what they’d like to see. There are no silly ideas at this point!

Choose the creative approach that gets you a range of options to review.

Read next: How to improve problem solving with lessons learned.

3. Evaluate each option

Once you have several options to consider, you can evaluate each one based on its effectiveness and cost before deciding which one is most suitable for your situation.

Use pairwise prioritisation, multi-criteria decision making or analytical hierarchy process (AHP) to help with the evaluation.

4. Select an appropriate course of action

Now you’ve got all the options for solving your problem, you can actually solve it by choosing a course of action that will sort it out. This is where decision making comes in. in this step you make the decision.

Finally, implement your chosen solution and monitor its progress over time so that any necessary adjustments can be made as needed.

Benefits of problem solving skills

There are many benefits associated with having effective problem solving skills.

These include improved decision making abilities (more on that in a minute), increased creativity, better communication skills, greater confidence when faced with challenging situations, enhanced ability to think critically, more efficient use of resources, improved relationships between colleagues or team members due to shared understanding of goals and increased productivity levels due to fewer mistakes being made during projects or tasks.

(Breathe. That was a long sentence, sorry.)

All these advantages make problem solving an invaluable skill in both personal life and professional life scenarios.

What is decision making?

Basically, decision making is the process of selecting a course of action from a number of alternatives. It involves gathering information, weighing options, and choosing the best option for achieving a desired outcome.

But how is that different to problem solving?

Decision making is the process of doing Step 4 of the problem solving process. It’s the choice making, option selection, conclusion of the analysis and thinking.

It’s decisive (duh), purposeful, specific. It removes the ambiguity of the ‘what do we do?’ and helps the team move towards the ‘OK, how do we do that?’

It brings action to a situation.

The decision making process

There is a simple method for decision making too, although the actual decision itself might be tough to make.

• Identify that a decision is required
• Ensure you have the data to make the decision
• Make the decision
• Tell whoever needs to implement the decision

1. Identify that a decision is required

The decision-making process typically begins with identifying what decision needs to be made. Are you making the right decision, or is there something else, deeper, different that is really what’s required?

In this step you also want to identify who is making the decision. That could be your project sponsor, a panel, you by yourself, a committee or whoever. Getting this step clear saves headaches later.

2. Ensure you have the data to make the decision

Do you have all the info you need to make the decision? If not, get it.

When decisions are made quickly but thoughtfully, they can save time and resources while still producing quality results.

Major decisions need more time spent on this step to make sure you understand all the variables.

3. Make the decision

After considering all potential solutions, it’s time to make a choice based on what will yield the best results for everyone involved.

This is the hard part: make the decision! The person or people responsible for this should weigh up the data and use their professional judgement to choose the right course of action. Decision trees can be useful here to avoid unconscious bias (or conscious bias!).

Obviously this is harder for complex decisions. What vendor to choose for a 3-year outsourcing arrangement is harder to decide than what venue to book for a team away day.

4. Tell whoever needs to implement the decision

Great – you’ve made the call and know what to do, but does the rest of the team? Don’t keep the decision to yourself!

Make sure whoever needs to know the next steps is aware that the decision has been made so they can implement it and take the right action.

Having confidence in decisions leads to greater trust between team members and better collaboration overall, which can lead to improved project outcomes over time. Well-made decisions often create opportunities for growth within teams by allowing them to learn from their mistakes as well as their successes along the way.

Similarities between problem solving and decision making

Problem solving and decision making sound very similar, right?

Well, that is true. Both processes involve gathering information, analyzing it, and coming up with solutions or courses of action. They both require critical thinking skills to identify potential solutions or options that are most likely to be successful.

The processes use a similar flow

Both processes involve identifying a problem or issue, researching possible solutions, evaluating those solutions based on criteria such as cost-effectiveness or feasibility, selecting an option from among the available choices, implementing the chosen solution, and you’d also want to monitor its effectiveness over time.

The process can be iterative if necessary; if one solution does not work out as expected then another may need to be tried until a satisfactory outcome is achieved.

They both produce a satisfactory solution

Problem solving and decision making usually lead to some kind of action being taken in order to address a given issue or situation. Problem solving often involves finding creative solutions for complex problems, while decision making typically entails selecting a course of action from several possibilities after carefully evaluating each option’s advantages and disadvantages.

But ultimately, the goal is for something positive (or at least neutral) to come out of the helpful process so that whatever challenge was initially presented can be effectively addressed.

Despite being so similar you could pretty much interchange them in some circumstances, there are some differences.

Differences between problem solving and decision making

Although they have similarities in terms of the process used to come up with a solution, their goals differ significantly.

Process goals are different

The goal of problem solving is to find a solution to an existing issue. It involves identifying the cause of a problem and then finding ways to address it. Problem solving often requires input from multiple stakeholders who can provide different perspectives on how best to solve the issue at hand.

On the other hand, decision making focuses on choosing the best option from multiple alternatives. This could include selecting between competing products or services or deciding which strategy will be most effective for achieving certain objectives.

In other words: decision making doesn’t necessarily mean there is a problem. We make decisions every day about small things and big things, but they aren’t all problems that need the creative step of solutioning.

Sometimes a decision just needs to be taken and the options are clearly known.

They require different stakeholders

Another key difference between problem solving and decision making is that while problem solving typically requires input from multiple stakeholders, decision making is usually done by one individual or group who has access to all relevant information needed for the decision-making process.

To give you an example. Let’s say on a technical project the development team hit a problem. They have to bring in various subject matter experts to research and identify the parameters involved. They consult, brainstorm and debate. It’s a group effort, and it’s likely to end in a solution.

However, if I need my project sponsor to choose between two risk treatments, I’ll take him my recommendation and a summary of options and he’ll simply choose. Done.

Decisions are made based on what is known about a situation rather than relying on external opinions or advice when trying to make an informed choice about what course of action should be taken next.

They produce different results

The nature of both processes also differs in terms of the types of solutions they produce. Problem solving typically results in creative solutions that can be implemented over time, while decision making produces immediate choices from among existing alternatives without necessarily creating something new or unique.

Both processes involve the identification of a problem or issue, the collection of information to evaluate possible solutions, and an analysis of potential outcomes. The main difference between them is in their goals: problem solving seeks to identify the root cause of an issue and develop a solution that will address it; decision making focuses on selecting from among available options.

Both processes require careful consideration of facts and opinions before any action is taken. Problem solving often involves more people than decision making as it requires collaboration to identify underlying causes and brainstorm potential solutions. Decision makers may consult with others for input but ultimately make decisions independently based on their own judgment.

Still got a question?

What is the difference between decision and decision making.

A decision is the act of making a choice between two or more alternatives. Decision making is the process by which decisions are made. It involves gathering information, analyzing data, evaluating alternatives and choosing a course of action based on this analysis. The outcome of the process is the decision. The decision-making process also includes monitoring progress to ensure that goals are being met and taking corrective action if needed.

What is the importance of problem-solving and decision making?

Problem-solving and decision making are essential skills for project managers and managers in general. The processes keep work moving by making sure problems get solved and decisions get made so team members are not blocked from finishing their tasks.

What are the steps in problem-solving and decision making?

Problem-solving and decision making involve a series of steps that can help ensure the best possible outcome. The first step is to identify the problem or opportunity, then analyze it by gathering relevant information and evaluating potential solutions. After considering all options, select an appropriate solution and develop an action plan for implementation. Finally, monitor progress to ensure success and make necessary adjustments along the way. By following these steps, project managers can effectively manage projects while minimizing risks and maximizing results.

Before you go…

Sometimes there isn’t a right decision – it’s simply important to make a decision. As for the desk, in the end, we used a piece of furniture we already had upstairs and didn’t buy one at all.

I spent a morning measuring and researching options, and I’ll never get that time back, but that’s OK.

As a leader, you should be skilled at solving problems and making decisions, and the processes that support them. However, you don’t have to be doing all the solving and making all the calls yourself. As long as you facilitate the process and get the right people in the room, you can step back and let the experts do their thing.

Let the right people do the work and create an environment where your projects move forward because everyone’s got what they need to keep things moving.

Project manager, author, mentor

Elizabeth Harrin is a Fellow of the Association for Project Management in the UK. She holds degrees from the University of York and Roehampton University, and several project management certifications including APM PMQ. She first took her PRINCE2 Practitioner exam in 2004 and has worked extensively in project delivery for over 20 years. Elizabeth is also the founder of the Project Management Rebels community, a mentoring group for professionals. She's written several books for project managers including Managing Multiple Projects .

Table of Contents

What is a pareto chart, pareto principle explained, when to use a pareto chart, steps of pareto analysis, pareto chart procedure: how to create a pareto chart, advantages of pareto analysis, disadvantages of pareto analysis, example of pareto analysis, understanding pareto chart: analysis and interpretation.

With the ability to visualize and prioritize issues based on how frequent or serious they are, a Pareto chart is an amazing tool for anyone involved in problem-solving or decision-making processes . It can be particularly beneficial for managers, analysts, engineers, and anyone else within various domains such as business management, quality control, project management, or process improvement.

Deriving from the Pareto Principle, i.e., 20% of the causes give 80% of the impact, this chart represents the data in descending order by emphasis on the most significant factors. The power of the Pareto Principle lies in the fact that because of the clear graphical representation, individuals can concentrate mostly on really important issues. 

A Pareto chart is a composite chart that uses bar graphs to convey the major factors causing a problem or issue. It mixes up the bar graph and line chart, with the bars showing individual category factors separately and the line showing the number of parts out of the total.

The idea behind the Pareto chart is rooted in the Pareto Principle, the 80*20 rule. The Pareto chart starts with data collection and decomposition, which refers to the major causes of the problem. Now, factors are placed into the scale of the following ranking system: 

• The higher the position is, the more essential the factor is. 

As for the Rule of Plurality, the one leading in the rating system becomes the first factor. The frequency for each group is illustrated in a bar graph and a line graph.

Pareto charts enable decision-makers to identify the most crucial problems or improvement opportunities quickly. This pattern allows them to prioritize different programs or projects and allocate resources effectively, thereby producing more targeted and effectively implemented solutions.

The concept of the Pareto Principle is such that according to it, the effects of 80% of the results are caused by 20% of their causes. The 'Pareto 80/20 Principle' was named after Vilfredo Pareto, an Italian economist, who noticed that almost 80% of the earth was enjoyed by 20% of the population in Italy. This principle becomes equally relevant to many observed facts at different edges of science.

In business or economic matters, the Pareto Principle highlights that a small percentage of input or efforts can frequently yield a large proportion of results or outcomes. For example, it could help the management understand that 80% of a company will bring in 20% of the profits or that 80% of the problems are caused by 20% of the causes.

The rule also works outside the economy; for example, in time management, it helps us prioritize activities by demonstrating that 80% of productive efforts are devoted to only 20% of the tasks done consistently. 

While the exact percentages may vary in different contexts, the main idea remains consistent: most often, a minority of inputs or, sometimes, only many forces are forcing the majority of results or outcomes.

A Pareto chart is best used when you need to:

• Identify Priorities: A Pareto chart is useful when many factors are contributing to the final result. Having this tool from day one will equip you with knowledge of what factors hold the highest priority and where resources should be applied. 
• Communicate Effectively: Pareto charts offer a graphical way of displaying data , making it easier to tell the management what was found. 
• Track Progress: Providing continuous updates to the chart with new data, you will have a chance to evaluate whether the activities targeting the most potent factors are giving the desirable outcomes and to adjust strategies if needed.
• Problem-Solving: Very complex problems require dissection into simpler parts, which is where Pareto charts are important. By recognizing the main drivers of the problem, it will be possible to plan and develop plans that target the hidden causes.

Become a AI & Machine Learning Professional

• $667.9 bn Expected Generative AI market size by 2030
• 24.4% The global Generative AI market's projected CAGR from 2023-2030
• $4.4 tn Expected value added by Generative AI to the global economy annually

Generative AI for Business Transformation

• Program completion certificate from Purdue University Online and Simplilearn
• Access to Purdue’s Alumni Association membership on program completion

Applied Generative AI Specialization

• Access to Purdue’s alumni association membership on program completion

The technique of Pareto analysis is applied to determine what leads to a certain situation and which issue needs to be focused on the most. The rule of Pareto is also known as the 80/20 rule, indicating that the majority of an effect is obtained from the minority of its causes. Here are the steps of Pareto analysis:

Define the Problem

Start by defining the problem you are trying to solve. It might be related to customer complaints, production process inefficiencies, or equipment malfunctions. Ensure that the selected issue is tangible enough and can be measured properly, thereby facilitating the process of collecting and analyzing data.

Collect Data

Gather information about the problem you knew about from the existing sources. This might include customer feedback, reports, process logs, or other data sources that provide insights into the issue. Ensure that the data is accurate , complete, and representative of your problem.

Categorize the Data

Grouping or categorizing the data based on the different factors that impact the problem could be encouraged. For example, when working with customer complaints, classify them by type of complaint to determine which issue is the most important, such as poor product quality, delayed delivery, or customer service problems.

Calculate Frequencies

Figure out the end frequency for every category by the number of factors in the data set. This step enables us to define the dimensional nature of every problem factor.

Calculate Cumulative Frequencies

Sum up the table entries where each category represents the most significant to the least significant factor for the cumulative frequency. This part helps you identify the extent of the whole problem, which each factor is monitoring.

Calculate Percentages

Calculate the percentages of each category's total problem by dividing each category's respective frequencies by their total frequency and multiplying by 100. This action eliminates biases and simplifies the comparison accuracy of each attribute.

Create a Pareto Chart

Create a Pareto chart using the categories and the amounts or percentages next to them. Plot the categories on the x-axis (horizontal line) and their frequency or percentages (vertical line). Classify the categories by the order in which they are displayed in line with their occurrence or size.

Identify the Important Ones

Know what categories of the total problem to be explained account for the biggest amount of the problem. These are the “vital few” coupled with the most significant factors. Like the Pareto Principle, your goal is to focus on the top 20 percent of the problem for about 80 percent of what was mentioned.

Analyze Root Causes

After the important step, when you’ve found the key problems, discover how they are deeply interconnected with the root cause. Conduct root cause analysis to uncover underlying issues or systemic problems that need to be addressed to mitigate the problem effectively.

Develop Action Plans

Based on the outcome of your analysis , design action plans to address the Pareto principle factors. By allocating resources and prioritizing interventions that address these factors, much more can be accomplished in delivering results.

Implement Solutions

Implement the identified actions to support the few key factors. Track the progress and take corrective measures to avoid duplication of efforts. In this case, your solutions should effectively solve the problem.

Monitor and Evaluate

Continuously monitor and assess the effectiveness of the measures implemented and react in case of problems or issues. Apply the data-driven approach to assess performance and to determine if the problem is being addressed satisfactorily. Make the needed adjustments or additions to the mechanism to complete the targets.

• To conduct a Pareto analysis, acquire data connected to the problem from various sources and put them into classes known as factors of the problem. Work out the frequency of the category appearance and get the cumulative frequencies. 
• Next, determine the percentage of each category for the problem as a whole. The highest percentage to the lowest are plotted on the x-axis, while their corresponding frequencies or percentages are shown on the y-axis. 
• Label the right vertical axis with the cumulative percentages (Note that the cumulative total should equal 100%).
• Draw in the bars for each item.
• Next, draw a line graph of the cumulative percentages. Ensure that the first point on the line graph lines up with the top of the first bar.

With the chart prepared, the final step is analysis. Identify the items that appear to account for most of the difficulty. 

The importance of Pareto analysis includes the following aspects: 

• Pareto analysis helps identify the important factors or issues that contribute the most to a problem. By focusing on the vital few factors, organizations can allocate resources and efforts more efficiently, targeting areas where they must address the issues most importantly.
• Pareto charts provide a clear visual representation of data, making it easier to understand complex relationships and prioritize actions. 
• Pareto analysis is based on empirical data, enabling data-driven decision-making processes. 
• Pareto analysis helps in problem-solving . Instead of addressing every aspect of a problem equally, organizations can prioritize the root causes or key drivers.
• Pareto analysis can be used as part of a continuous improvement process to monitor progress. 
• It provides a common language for communicating findings and priorities to stakeholders.

While Pareto analysis offers several benefits, it also has some disadvantages: 

• Pareto analysis depends on selecting appropriate data categories to represent the problem. The nature of categorization can introduce bias and influence the results.
• Pareto analysis focuses on quantitative data, like counts or frequencies of occurrences. This numerical data emphasis may overlook the problem's qualitative aspects, such as root causes, context, or underlying dynamics. 
• Static representation of problems at a specific point in time, but they do not capture changes or trends over time. Continuous monitoring and updating of Pareto charts are necessary to ensure their relevance and effectiveness.
• Pareto analysis assumes that factors contributing to the problem are independent. However, in reality, factors may be interconnected.
• Pareto analysis focuses on identifying the vital few factors that contribute the most to the problem, which leads to neglecting minority factors that may still have significant implications. 

An example of Pareto analysis includes a case where a manufacturing company is experiencing product quality issues. The company decides to conduct a Pareto analysis to identify the most significant defects contributing to the overall quality problems. 

• Define the Problem: The company defines the problem as quality issues affecting its products, leading to customer complaints and decreased satisfaction.
• Collect Data: Data is collected from various sources, including defect reports, customer complaints, and quality control records. The data includes information on the types and frequency of defects observed in the products.
• Categorize the Data: The collected data is categorized into different types of defects, such as manufacturing defects, design flaws, material issues, and packaging errors.
• Calculate Frequencies: The frequency of occurrence for each defect type is calculated by counting the number of occurrences in the data set. For example, the data might show that there were 50 instances of manufacturing defects, 30 instances of design flaws, 20 instances of material issues, and 10 instances of packaging errors.
• Create a Pareto Chart: A Pareto chart is constructed, with the defect types plotted on the x-axis and their frequencies on the y-axis. The defect types are arranged in descending order of frequency, with the most common defect type appearing first.
• Identify the Vital Few: The Pareto chart reveals that manufacturing defects account for most quality issues, representing 50% of the total defects. Design flaws and material issues account for 30% and 20% of the defects, respectively, while packaging errors have a minimal impact.
• Analyze Root Causes: Further analysis is conducted to understand the root causes behind the manufacturing defects. This may involve examining production processes, equipment performance, training procedures, and quality control measures to identify areas for improvement.
• Develop Action Plans: Based on the analysis, action plans address the root causes of manufacturing defects. This might include implementing process improvements, enhancing quality control measures, providing additional training to staff, and refining product designs.
• Implement Solutions: The action plans are implemented, and changes are made to production processes, quality control protocols, and other relevant areas to reduce the occurrence of manufacturing defects.
• Monitor and Evaluate: Progress is monitored closely to assess the effectiveness of the implemented solutions. Key performance indicators, such as defect rates, customer satisfaction scores, and product returns, are tracked to measure improvement and identify areas needing further attention.

Pareto charts are invaluable tools for decision-making, offering a systematic approach to identifying and addressing key issues. Organizations can achieve maximum impact and drive continuous improvement by focusing efforts on the vital few factors. Simplilearn offers AI and machine learning courses that empower professionals to use advanced technologies for business transformation. Explore Simplilearn's courses on Generative AI for business transformation and Applied AI to gain the skills needed to thrive in today's data-driven world.

1. What are the components of a Pareto Chart?

Components of a Pareto Chart include bars representing categories and a line graph showing cumulative percentages.

2. What does the Pareto Diagram include?

The Pareto Diagram includes categories of factors contributing to a problem and their respective frequencies or percentages.

3. What is the 80/20 rule in Pareto charts?

The 80/20 rule in Pareto charts states that roughly 80% of effects come from 20% of causes.

4. Can Pareto charts be used for all types of data?

Pareto charts can be used for most data types, including categories, frequencies, or percentages.

5. What are the limitations of using Pareto charts?

Limitations of Pareto charts include subjectivity in data selection, overemphasis on quantitative data, and neglect of minority factors.

Our AI & Machine Learning Courses Duration And Fees

AI & Machine Learning Courses typically range from a few weeks to several months, with fees varying based on program and institution.

Recommended Reads

Digital Transformation in Banking: Why Now, and How?

Top 20 Generative AI Tool

What is ChatGPT AI and Why Does it Matter?

Digital Transformation and Future of Tech Jobs in India: A Simplilearn Report 2020

List of Generative Adversarial Networks Applications

Top 18 Artificial Intelligence (AI) Applications in 2024

Get Affiliated Certifications with Live Class programs

• PMP, PMI, PMBOK, CAPM, PgMP, PfMP, ACP, PBA, RMP, SP, and OPM3 are registered marks of the Project Management Institute, Inc.