contents page dissertation template

Thesis and Dissertation Office

• Colleges & Degrees
• Academic Calendar
• International Education
• Graduate Studies
• Accreditation
• Tuition and Fees
• Parking & Maps
• Careers with CSULB
• Alumni Home
• Alumni Volunteering
• Alumni Giving

Campus Life

• Centers & Organizations
• Commencement
• Student Life
• Office of the President
• Office of the Provost
• Administration & Finance
• Student Affairs
• University Relations & Development
• Information Technology
• Beach Shops
• Campus Directory
• Enrollment Services
• Financial Aid
• Schedule of Classes
• Student Records
• 49er Foundation
• Research Foundation
• University Policies

1250 BELLFLOWER BOULEVARD LONG BEACH, CALIFORNIA 90840 562.985.4111

Table of Contents/Lists Pages Templates

• Table of contents template (DOC)

This Microsoft Word document can be saved to your computer to use as a template. It was created using Microsoft Office 2013 version of Word. Please email [email protected] if you have problems with the download.

• How it works

How to Create the Best Table of Contents for a Dissertation

Published by Owen Ingram at August 12th, 2021 , Revised On September 20, 2023

“A table of contents is an essential part of any article, book, proceedings, essay , and paper with plenty of information. It requires providing the reader’s guidance about the position of the content.”

When preparing a  dissertation , you may cram as much information into it as appropriate. The dissertation may be an extremely well-written one with a lot of valuable information to offer. Still, all that information could become perplexing if the reader cannot easily find the information.

The length of dissertations usually varies from a few pages to a few hundred pages, making it very difficult to find information that you may be after.

Instead of skimming through every page of the dissertation, there is a need for a guideline that directs the reader to the correct section of the dissertation and, more importantly, the correct page in the section.

Also read:   The List of Figures and Tables in the Dissertation .

What is the Table of Contents in the Dissertation?

The table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents.

Depending on the detail level in a table of contents, the most useful headings are listed to provide the reader concerning which page the said information may be found.

The table of contents is essentially a list found at the beginning of a  dissertation , which contains names of the chapters, section titles and/or very brief descriptions, and page numbers indicated for each.

This allows the reader to look at the table of contents to locate the information needed from the dissertation. Having an effective table of contents is key to providing a seamless reading experience to the reader.

Here in this article, we will uncover every piece of information you need to know to write the dissertation’s abstract.

This article helps the readers on how to create the best table of contents for the dissertation. An important thing to note is that this guide discusses creating a table of contents in Microsoft Word.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of disciplines. Guaranteeing 100% satisfaction!

Styles for Dissertation Table of Contents

Making an effective table of contents starts with identifying headings and designating styles to those headings.

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents .

Each heading style already has predefined sizes, fonts, colours, spacing, etc. but can be changed as per the user’s requirements. This also helps once all headings have been created and you intend to change the style of a certain type of heading.

All that is needed to change the style of a type of heading is automatically reflected on all headings that use the style.

Below is how the styles menu looks like;

To allocate a style to a heading, first select a heading and then click on one of the styles in the ‘Styles’ menu. Doing so converts the selected heading to the style that is selected in the Styles menu.

You can style a similar heading level in the same style by selecting each heading and then clicking on the style in the Style menu.

It is important to note that it greatly helps and saves time if you allocate styles systematically, i.e., you allocate the style as you write.

The styles are not limited to headings only but can be used for paragraphs and by selecting the whole paragraph and applying a style to it.

Changing Appearance of Pre-Defined Styles

To change the appearance of a style to one that suits you,

• You would need to right-click on one of the styles to open a drop-down menu.

• Select ‘Modify’ from the menu. This would display a window with various formatting and appearance options. You can select the most appropriate ones and click ‘OK.’ The change that you made to the style reflects on all headings or paragraphs that use this style.

Further changes can be made to headings, but using styles is an important step for creating the table of contents for the thesis. Once this step is completed, you can continue to create a thesis table of contents.

Also Read:  What is Appendix in Dissertation?

Things to Consider when Making APA Style Table of Contents

• The pages before the body of the dissertation, known as the ‘Prefatory Pages,’ should not have page numbers on them but should be numbered in the Roman Numerals instead as (i, ii, iii…).
• Table of Contents and the Abstract pages are not to contain any numbers.
• The remaining pages would carry the standard page numbers (1,2,3…).
• The section titles and page numbers in the dissertation table of contents should have dotted lines between them.
• All the Prefatory pages, Sections, Chapter Titles, Headings, Sub Headings, Reference Sections, and Appendices should be listed in the contents’ thesis table. If there are a limited number of Tables or Figures, they may be listed in the dissertation’s table contents.
• If there are many figures, tables, symbols, or abbreviations, a List of Tables, List of Figures , List of Symbols, and List of Abbreviations should be made for easy navigation. These lists, however, should not be listed in the thesis table of contents.
• The thesis/dissertation must be divided into sections even if it is not divided into chapters, with all sections being listed in the table of contents for the thesis.

Generating Dissertation Table of Contents

First, to generate the Table of Contents, start by entering a blank page after the pages you need the table of contents to follow.

• To do so, click on the bottom of the page you want before the Table of Contents.
• Open the ‘Insert’ tab and select ‘Page Break’.
• This will create a page between the top and bottom sections of the Table of Contents area.

By the time you reach this section, you would have given each heading or sub-heading a dedicated style, distinguishing between different types of headings. Microsoft Word can automatically generate a Table of Contents, but the document, particularly the headings, needs to be formatted according to styles for this feature to work. You can assign different headings levels, different styles for Microsoft Word to recognize the level of heading.

How to Insert Table of Contents

• Place the cursor where you want to place the Table of Contents on the page you added earlier.
• On the ‘References’ tab, open the Table of Contents group. This would open a list of different Table of Contents designs and a  table of contents sample.

• You can select an option from the available Table of Contents or make a Custom Table of Contents. Although the available Table of Contents samples is appropriate, you may use a custom table of contents if it is more suitable to your needs. This allows you to modify different formatting options for the Table of Contents to satisfy your own

Updating the Table of Contents

As you proceed with editing your dissertation, the changes cause the page numbers and headings to vary. Often, people fail to incorporate those changes into the Table of Contents, which then effectively serves as an incorrect table and causes confusion.

It is thus important to update the changes into the table of contents as the final step once you have made all the necessary changes in the dissertation and are ready to print it.

These changes may alter the length of the  thesis table of contents , which may also cause the dissertation’s formatting to be altered a little, so it is best to reformat it after updating the table of contents.

To update the table of contents,

• Select ‘Update Table’ in the References tab.
• This would open a dialogue box. Select ‘Update Entire Table’ to ensure that all changes are reflected in the contents table and not just the page numbers. This would display all changes and additions you have made to the document (Anon., 2017).

Using this guide, you should understand how to create the best table of contents for the dissertation. The use of a Table of Contents, while being important for most written work, is even more critical for dissertations, especially when the proper methodology of creating the table of contents is followed.

This includes the guidelines that must be considered to correctly format the table of contents so that it may be shaped so that it follows the norms and is effective at helping the reader navigate through the content of the dissertation.

The use of Microsoft Word’s Table of Contents generation feature has greatly helped people worldwide create, edit, and update the table of contents of their dissertations with ease.

Here in this article, we will uncover every piece of information you need to know  how to write the dissertation’s abstract .

Are you in need of help with dissertation writing? At ResearchProspect, we have hundreds of Master’s and PhD qualified writers for all academic subjects, so you can get help with any aspect of your dissertation project. You can place your order for a proposal ,  full dissertation paper , or  individual chapters .

Is it essential to add a table of content to the dissertation?

Yes, it is important to add a table of content in a dissertation .

How to make an effective table of contents for the dissertation?

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents.

How do I update the table of contents?

You may also like.

A list of glossary in a dissertation contains all the terms that were used in your dissertation but the meanings of which may not be obvious to the readers.

Your dissertation introduction chapter provides detailed information on the research problem, significance of research, and research aim & objectives.

Writing a dissertation can be tough if this is the first time you are doing it. You need to look into relevant literature, analyze past researches, conduct surveys, interviews etc.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgments
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

Table of contents

The Table of Contents should follow these guidelines:

• ​All sections of the manuscript are listed in the Table of Contents except the Title Page, the Copyright Page, the Dedication Page, and the Table of Contents.
• You may list subsections within chapters
• Creative works are not exempt from the requirement to include a Table of Contents

Table of contents example

Here is an example of a Table of Contents page from the Template. Please note that your table of contents may be longer than one page.

• << Previous: Dedication Page
• Next: List of Figures (etc.) >>
• Last Updated: Aug 26, 2024 11:00 AM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• Dissertation & Thesis Outline | Example & Free Templates

Dissertation & Thesis Outline | Example & Free Templates

Published on 8 June 2022 by Tegan George .

A thesis or dissertation outline is one of the most critical early steps in your writing process . It helps you to lay out and organise your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

Generally, an outline contains information on the different sections included in your thesis or dissertation, such as:

• Your anticipated title
• Your abstract
• Your chapters (sometimes subdivided into further topics like literature review, research methods, avenues for future research, etc.)

In the final product, you can also provide a chapter outline for your readers. This is a short paragraph at the end of your introduction to inform readers about the organisational structure of your thesis or dissertation . This chapter outline is also known as a reading guide or summary outline.

Table of contents

How to outline your thesis or dissertation, dissertation and thesis outline templates, chapter outline example, sample sentences for your chapter outline, sample verbs for variation in your chapter outline, frequently asked questions about outlines.

While there are some inter-institutional differences, many outlines proceed in a fairly similar fashion.

• Working Title
• ‘Elevator pitch’ of your work (often written last).
• Introduce your area of study, sharing details about your research question, problem statement , and hypotheses . Situate your research within an existing paradigm or conceptual or theoretical framework .
• Subdivide as you see fit into main topics and sub-topics.
• Describe your research methods (e.g., your scope, population , and data collection ).
• Present your research findings and share about your data analysis methods.
• Answer the research question in a concise way.
• Interpret your findings, discuss potential limitations of your own research and speculate about future implications or related opportunities.

To help you get started, we’ve created a full thesis or dissertation template in Word or Google Docs format. It’s easy adapt it to your own requirements.

 Download Word template    Download Google Docs template

It can be easy to fall into a pattern of overusing the same words or sentence constructions, which can make your work monotonous and repetitive for your readers. Consider utilising some of the alternative constructions presented below.

Example 1: Passive construction

The passive voice is a common choice for outlines and overviews because the context makes it clear who is carrying out the action (e.g., you are conducting the research ). However, overuse of the passive voice can make your text vague and imprecise.

Example 2: IS-AV construction

You can also present your information using the ‘IS-AV’ (inanimate subject with an active verb) construction.

A chapter is an inanimate object, so it is not capable of taking an action itself (e.g., presenting or discussing). However, the meaning of the sentence is still easily understandable, so the IS-AV construction can be a good way to add variety to your text.

Example 3: The I construction

Another option is to use the ‘I’ construction, which is often recommended by style manuals (e.g., APA Style and Chicago style ). However, depending on your field of study, this construction is not always considered professional or academic. Ask your supervisor if you’re not sure.

Example 4: Mix-and-match

To truly make the most of these options, consider mixing and matching the passive voice , IS-AV construction , and ‘I’ construction .This can help the flow of your argument and improve the readability of your text.

As you draft the chapter outline, you may also find yourself frequently repeating the same words, such as ‘discuss’, ‘present’, ‘prove’, or ‘show’. Consider branching out to add richness and nuance to your writing. Here are some examples of synonyms you can use.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organise your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract   in the table of contents.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. (2022, June 08). Dissertation & Thesis Outline | Example & Free Templates. Scribbr. Retrieved 26 August 2024, from https://www.scribbr.co.uk/thesis-dissertation/outline-thesis-dissertation/

Is this article helpful?

Tegan George

Other students also liked, dissertation table of contents in word | instructions & examples, how to write a dissertation proposal | a step-by-step guide, thesis & dissertation acknowledgements | tips & examples.

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings . In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to create a table of contents for a dissertation (apa), published by steve tippins on june 20, 2022 june 20, 2022.

Last Updated on: 7th June 2024, 05:08 am

APA Dissertation Table of Contents Format Guidelines

• The table of contents should be double spaced with one-inch margins on all sides. 
• It should be written in the same font and size as the rest of your dissertation.  
• At the top of the page, write Table of Contents , centered and in bold.
• Although in the body of the paper you can use up to five levels of headings, up to three levels are usually provided in the Table of Contents. Including lower-level headings is optional. 
• Indent each subheading five spaces. 
• Write all text in title case. In title case, the first letter of major words is capitalized.
• Provide the page number where the main headings and subheadings begin, and provide dotted lines between the heading and the page number.
• Page numbers for the Dedication, Acknowledgements, and Preface should be in lower case Roman Numbers (i, v, x, l, c, d and m.). The page numbers for the rest of the text should be in Arabic numerals (1,2, 3, 4, etc.).

How to Write a Dissertation Table of Contents in APA Using Microsoft Word

Step 1. Instead of manually trying to write and format the table of contents, you can create a generated one using Microsoft Word. To do this, first go to the Home tab. This is where you will choose the styles for the table of contents. 

Step 2. The top-level headings will be your chapter titles, so on the right side of the tab, apply the Heading 1 style. 

Step 3. The second-level headings will be your subheadings, so apply the Heading 2 style. This will place your subheadings underneath your main headings.

Step 4. You will now produce page links to your document. In the top ribbon, click on the References tab and select Table of Contents . 

Step 5. If the style does not indicate APA, such as the one below, use the drop down arrow to select APA. 

Step 6. Next, choose the number of levels that you want. In this case, you want to be able to have up to three levels, so choose Automatic Table 2 , which has the appropriate heading for a dissertation. 

Step 7. Click ok , and you are all set. Microsoft word will automatically generate your dissertation’s table of contents as you write it.

List of Tables and Figures

Your list of tables and figures will be written at the end of the list of information in the body of your paper. You will create these lists the same way that you created the main table of contents. 

However, the headings will be different. 

Instead of the heading “Table of Contents,” the headings will be “List of Tables” and “List of Figures.” (An example is provided in the table of contents example below.)

Sample of a Dissertation Table of Contents

In the example below, there are three level headings. The list of tables and figures are provided at the bottom of the other contents. The sections in your table of contents may be different depending on your college’s requirements. 

Updating the Dissertation Table of Contents

As you continue working on your dissertation, you will need to update the page numbers because they may change. 

To update the page numbers, right-click on the table of contents in your document and select the Update field . Then, the Update Table of Contents box will appear. 

You can choose to Update page numbers only or all the information in the table of contents by clicking on Update entire table . 

Note: For more information, refer to the APA Manual 7 th edition , sections 2.2-2.27.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

Dissertation memes.

Sometimes you can’t dissertate anymore and you just need to meme. Don’t worry, I’ve got you. Here are some of my favorite dissertation memes that I’ve seen lately. My Favorite Dissertation Memes For when you Read more…

Surviving Post Dissertation Stress Disorder

The process of earning a doctorate can be long and stressful – and for some people, it can even be traumatic. This may be hard for those who haven’t been through a doctoral program to Read more…

PhD by Publication

PhD by publication, also known as “PhD by portfolio” or “PhD by published works,” is a relatively new route to completing your dissertation requirements for your doctoral degree. In the traditional dissertation route, you have Read more…

WTO / Personal / Lists / Free Table of Contents Templates (for Microsoft Word)

Free Table of Contents Templates (for Microsoft Word)

Whether you are writing a book, large essay, dissertation, or other longer academic papers, you will have to include a table of contents. It will act as a roadmap for the reader to each portion of your writing. It helps the reader to locate specific information in a document or revisit their favorite parts easily within the text. A well-structured TOC should simplify the way the reader finds what they are looking for and should always be placed on a separate page, just after the first page of an academic paper and after the abstract.

Depending on the type of writing , you may find that different documents require different styles of a TOC. Some may require numbers, while others may require a non-numbered TOC. It is, therefore, the writer’s duty to check the type of TOC they are required to include in their writing.

Free Table of Contents Templates

Simple templates

What is a Table of Contents?

A Table of Contents (TOC) is an organized list of all the parts of a document or book organized in the order in which the parts appear.

The TOC usually contains the titles, chapters, figures, and major sections of a document clearly labeled by their page number. It should be added last or updated after completing the whole document or book to capture all the contents accurately.

The Purpose of table of contents

If a book, business proposal, business report , or publication is long enough to include chapters, then a TOC will likely be included at the beginning of the book, report, or publication.

The TOC provides a sequential list of the book’s organizational structure, most commonly denoting the title, chapter number, and the starting page location. The chapter, page number, and title will help guide the reader in finding specific sections.

Basically, it serves two main purposes; one is to provide the reader with a general overview of what is contained in the document and how the content is organized, and the other is to enable the reader to go directly to the specific section of an on-line document.

Key Elements of a Table of Contents

The TOC is where one lists the chapters and major sections of their document, together with their page numbers. A clear and well-out table is very important as it indicates a quality paper is structured.

The key elements that should be included in the TOC are:

• The page titles
• Clear headings and subheadings
• The page numbers that show where in the document each section can be found

When creating your table, make sure to include all level one and two headings. You may also decide to include level three headings, although they are optional to include and should not be included in the TOC has reached its maximum length of two pages.

Level One:   CHAPTER 2: Literature Review

Level Two: 2.1 Overview of Information

Level Three: 2.1.1 Discipline of Knowledge

Ensure that you use clear headings throughout your document to make your table easy to understand. Keep in mind that the reader will see the table first before reading through your document.

Other things to include in your table include the appendices and tables. Including these two, however, depend largely on how many there are in your document.

If there are more than three tables and figures, you might consider listing them on a separate page. Else, you can include them in your table.

Steps to Create a Table of Contents in MS Word

For you to create a TOC in Microsoft Word, you must first define what you’d like to include in this part. First, start off by applying the different heading styles throughout your document.

Once you’ve done that, follow these steps to insert a TOC in MS Word automatically:

Add a title on the TOC page. Ensure that you follow the standard format specific to your document or as per your department’s guidelines.

Put your cursor where you want the table to go. The table is usually included between the abstract and the introduction.

In the ribbon, find the reference section and locate the TOC section. Use the search tab on the ribbon to search for the table.

Click the arrow that is next to the TOC icon and select Custom Table of Contents. Here, select the level of heading that you would like to include in your table and also make the necessary adjustments to each level by clicking the modify button.

Click on Custom table of contents.

After you’ve made sure that everything is OK. Click OK, and your TOC will be automatically generated.

Tips on Preparing Table of Contents

It is recommended that you use your TOC template last after to make sure that it provides a clear overview of your document. You can still draw up a mock TOC in your early stages of writing to help you formulate a structure and think through your topics and how you are going to research.

Make sure that all the heading levels are properly defined in your document before inserting the template.

Remember that the reader will most likely go through your table first before diving into the document to get an overview of what to expect. Make sure that your TOC is clear and that it captures your entire document.

Frequently Asked Questions

No, the TOC is basically a snapshot of the headings, tables, and page numbers in a document and does not automatically update itself as you make changes. Anytime you make changes to your document, you can update it by simply right-clicking on it and selecting the update field.

No, the TOC is usually included between the abstract and the introduction.

Yes, the maximum length of a TOC should be two pages, regardless of the type of document you are writing.

Regardless of your document’s type or size, using a TOC can help direct the readers to exactly where they want to be. Other than making your document more reader-friendly , the table also makes it easier for the author to go back and change or update contents throughout their document if necessary. By default, MS Word generates a TOC when you use the first three built-in heading styles, i.e., Heading 1, Heading 2, and Heading 3. To apply the different heading styles, simply select the style from the “Home” tab, or you can use a TOC template. Once you’ve properly defined the heading styles, follow the procedure given above to insert your table automatically.

About This Article

Was this helpful?

Great! Tell us more about your experience

Not up to par help us fix it, keep reading.

12 Printable Grocery (Shopping) List Templates – Free

Charts , Education

36 free printable ten frame templates | word – pdf.

Education , Reports

30 free book report templates – how to outline (format).

12 Free Yes No Flowchart Templates (PowerPoint)

Thank you for your feedback.

Your Voice, Our Progress. Your feedback matters a lot to us.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• Dissertation Table of Contents in Word | Instructions & Examples

Dissertation Table of Contents in Word | Instructions & Examples

Published on May 15, 2022 by Tegan George . Revised on July 18, 2023.

The table of contents is where you list the chapters and major sections of your thesis, dissertation , or research paper, alongside their page numbers. A clear and well-formatted table of contents is essential, as it demonstrates to your reader that a quality paper will follow.

The table of contents (TOC) should be placed between the abstract and the introduction . The maximum length should be two pages. Depending on the nature of your thesis , paper, or dissertation topic , there are a few formatting options you can choose from.

Download Word doc Download Google doc

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

What to include in your table of contents, what not to include in your table of contents, creating a table of contents in microsoft word, table of contents examples, updating a table of contents in microsoft word, other lists in your thesis, dissertation, or research paper, other interesting articles, frequently asked questions about the table of contents.

Depending on the length of your document, you can choose between a single-level, subdivided, or multi-level table of contents.

• A single-level table of contents only includes “level 1” headings , or chapters. This is the simplest option, but it may be too broad for a long document like a dissertation.
• A subdivided table of contents includes chapters as well as “level 2” headings, or sections. These show your reader what each chapter contains.
• A multi-level table of contents also further divides sections into “level 3” headings. This option can get messy quickly, so proceed with caution. Remember your table of contents should not be longer than 2 pages. A multi-level table is often a good choice for a shorter document like a research paper .

Examples of level 1 headings are Introduction, Literature Review , Methodology , and Bibliography. Subsections of each of these would be level 2 headings, further describing the contents of each chapter or large section. Any further subsections would be level 3.

In these introductory sections, less is often more. As you decide which sections to include, narrow it down to only the most essential.

Including appendices and tables

You should include all appendices in your table of contents. Whether or not you include tables and figures depends largely on how many there are in your document.

If there are more than three figures and tables, you might consider listing them on a separate page. Otherwise, you can include each one in the table of contents.

• Theses and dissertations often have a separate list of figures and tables.
• Research papers generally don’t have a separate list of figures and tables.

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

All level 1 and level 2 headings should be included in your table of contents, with level 3 headings used very sparingly.

The following things should never be included in a table of contents:

• Your acknowledgements page
• Your abstract
• The table of contents itself

The acknowledgements and abstract always precede the table of contents, so there’s no need to include them. This goes for any sections that precede the table of contents.

To automatically insert a table of contents in Microsoft Word, be sure to first apply the correct heading styles throughout the document, as shown below.

• Choose which headings are heading 1 and which are heading 2 (or 3)!
• For example, if all level 1 headings should be Times New Roman, 12-point font, and bold, add this formatting to the first level 1 heading.
• Highlight the level 1 heading.
• Right-click the style that says “Heading 1.”
• Select “Update Heading 1 to Match Selection.”
• Allocate the formatting for each heading throughout your document by highlighting the heading in question and clicking the style you wish to apply.

Once that’s all set, follow these steps:

• Add a title to your table of contents. Be sure to check if your citation style or university has guidelines for this.
• Place your cursor where you would like your table of contents to go.
• In the “References” section at the top, locate the Table of Contents group.
• Here, you can select which levels of headings you would like to include. You can also make manual adjustments to each level by clicking the Modify button.
• When you are ready to insert the table of contents, click “OK” and it will be automatically generated, as shown below.

The key features of a table of contents are:

• Clear headings and subheadings
• Corresponding page numbers

Check with your educational institution to see if they have any specific formatting or design requirements.

Write yourself a reminder to update your table of contents as one of your final tasks before submitting your dissertation or paper. It’s normal for your text to shift a bit as you input your final edits, and it’s crucial that your page numbers correspond correctly.

It’s easy to update your page numbers automatically in Microsoft Word. Simply right-click the table of contents and select “Update Field.” You can choose either to update page numbers only or to update all information in your table of contents.

In addition to a table of contents, you might also want to include a list of figures and tables, a list of abbreviations, and a glossary in your thesis or dissertation. You can use the following guides to do so:

• List of figures and tables
• List of abbreviations

It is less common to include these lists in a research paper.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract in the table of contents.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, July 18). Dissertation Table of Contents in Word | Instructions & Examples. Scribbr. Retrieved August 26, 2024, from https://www.scribbr.com/dissertation/table-of-contents/

Is this article helpful?

Tegan George

Other students also liked, how to write an abstract | steps & examples, how to write a thesis or dissertation introduction, how to write effective headings, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

Dissertations & projects: Formatting

• Research questions
• The process of reviewing
• Project management
• Literature-based projects

Jump to content on these pages:

You are not being examined on your ability to use Microsoft Word. The Skills Team have therefore provided you with a template that already has most of the formatting work done for you. This has been approved centrally by the university.

This page has links to the template, guidance document and videos to support you with using the official University of Hull MS Word templates for creating undergraduate dissertations or independent projects or taught masters dissertations. This is not a mandatory template, but using it will streamline the formatting of such a long document.

University templates

The University has created templates which can help take the stress out of formatting your dissertation or final year project.

Students studying any subject other than those listed below can use the general template provided:

Download the undergraduate final year project or dissertation template here

Download the taught masters dissertation template here

Modified versions

In some disciplines, the undergraduate template has been modified and is available via your dissertation or independent project module's Canvas site. Currently this is the case for the following subject areas:

• Biomedical Sciences

Guidance document

Templates guidance document

It includes information on:

• Working with template files
• Working with text (styles, table of contents)
• Working with images and tables (captions)
• Adding landscape pages

Whilst this says it is for undergraduate dissertations, it is also relevant to the taught masters template.

Video support

We have created a set of videos to support you with using the template. These can be accessed below.

The videos below cover the following (click or tap to jump to video):

• Downloading the template and filling in the title page.
• Using styles and updating the table of contents.
• Labelling your figures and tables.
• Using the cross-referencing tool to refer to figures and tables.
• Adding a landscape page to your document.

​​​​​​​ Please note that there is a separate playlist for using the History template: Using the UoH undergraduate dissertation template for History .

Video 1: Downloading the UG dissertation or independent project template and filling in front matter

Note that if you have downloaded the template already from the link above, you can skip to 1 min 30 sec.

Video 2: Using styles and updating the table of contents

Video 3: Labelling your figures and tables

Video 4: Using the cross-referencing tool to refer to figures and tables

This is an optional feature - if you don't have many tables or figures you may wish to do this manually.

Video 5: Adding a landscape page to your document

Not everyone will need this feature but it is useful for large tables or some figures.

• << Previous: Scientific
• Next: Integrity >>
• Last Updated: Apr 24, 2024 1:09 PM
• URL: https://libguides.hull.ac.uk/dissertations
• Login to LibApps
• Library websites Privacy Policy
• University of Hull privacy policy & cookies
• Website terms and conditions
• Accessibility
• Report a problem

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

University Thesis and Dissertation Templates

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

Theses and dissertations are already intensive, long-term projects that require a lot of effort and time from their authors. Formatting for submission to the university is often the last thing that graduate students do, and may delay earning the relevant degree if done incorrectly.

Below are some strategies graduate students can use to deal with institutional formatting requirements to earn their degrees on time.

Disciplinary conventions are still paramount.

Scholars in your own discipline are the most common readers of your dissertation; your committee, too, will expect your work to match with their expectations as members of your field. The style guide your field uses most commonly is always the one you should follow, and if your field uses conventions such as including all figures and illustrations at the end of the document, you should do so. After these considerations are met, move on to university formatting. Almost always, university formatting only deals with things like margins, font, numbering of chapters and sections, and illustrations; disciplinary style conventions in content such as APA's directive to use only last names of authors in-text are not interfered with by university formatting at all.

Use your university's formatting guidelines and templates to your advantage.

If your institution has a template for formatting your thesis or dissertation that you can use, do so. Don't look at another student's document and try to replicate it yourself. These templates typically have the necessary section breaks and styles already in the document, and you can copy in your work from your existing draft using the style pane in MS Word to ensure you're using the correct formatting (similarly with software such as Overleaf when writing in LaTeX, templates do a lot of the work for you). It's also often easier for workers in the offices that deal with theses and dissertations to help you with your work if you're using their template — they are familiar with these templates and can often navigate them more proficiently.

These templates also include placeholders for all front matter you will need to include in your thesis or dissertation, and may include guidelines for how to write these. Front matter includes your table of contents, acknowledgements, abstract, abbreviation list, figure list, committee page, and (sometimes) academic history or CV; everything before your introduction is front matter. Since front matter pages such as the author's academic history and dissertation committee are usually for the graduate school and not for your department, your advisor might not remember to have you include them. Knowing about them well before your deposit date means you won't be scrambling to fill in placeholders at the last minute or getting your work returned for revision from the graduate school.

Consider institutional formatting early and often.

Many graduate students leave this aspect of submitting their projects until it's almost too late to work on it, causing delays in obtaining their degree. Simply being aware that this is a task you'll have to complete and making sure you know where templates are, who you can ask for help in your graduate office or your department, and what your institution's guidelines are can help alleviate this issue. Once you know what you'll be expected to do to convert to university formatting, you can set regular check-in times for yourself to do this work in pieces rather than all at once (for instance, when you've completed a chapter and had it approved by your chair). 

Consider fair use for images and other third-party content.

Most theses and dissertations are published through ProQuest or another publisher (Harvard, for instance, uses their own open publishing service). For this reason, it may be the case that your institution requires all images or other content obtained from other sources to fall under fair use rules or, if an image is not considered under fair use, you'll have to obtain permission to print it in your dissertation. Your institution should have more guidance on their specific expectations for fair use content; knowing what these guidelines are well in advance of your deposit date means you won't have to make last-minute changes or removals to deposit your work.

• Mission & Vision
• Academic Calendar
• Doctoral Exam Schedule
• Graduate Programs
• Financial Support
• Priority Deadlines
• Catalog and Handbook
• New Graduate Student Orientation
• Signature Events
• Degree Planning
• Embedded Counseling
• International Students
• Electronic Theses and Dissertations (ETD)
• Graduate Peer Mentoring
• Responsible Conduct of Research (RCR)
• Graduate Assistantships Overview
• Graduate Student Support Plan
• Tuition, Fees and Other Resources
• Fellowships and Grants
• Goodnight Doctoral Fellowship
• University Fellowships Office
• Professional Development
• Five Competencies
• Teaching Programs
• Wellness Program
• Career Readiness Program for Non-Academic Careers
• Writing Program
• Leadership Program
• Office of Postdoctoral Affairs (OPA)
• Faculty & Staff
• Forms and Data
• GSC Resources
• ABGS Resources
• Resources for Student Funding
• Curriculum Development
• Program Assessment
• Recruiting Resources
• Alliances for Graduate Education and the Professoriate (AGEP)
• Give Now 

ETD Templates

This page includes templates for both Microsoft Word and LaTeX. Scroll down to find the LaTeX templates and learning resources.

Microsoft Word templates

Before using these templates, read all of the following instructions.

It would be best for you to start out writing your thesis or dissertation in a template. If you copy and paste a previously written thesis or dissertation into a template, incorrect formatting settings may also be copied into the document. If you do need to insert existing work into the template, it’s best to separately insert individual sections of body text. When doing so, make sure to maintain the standard headers and set formatting.

These templates are provided to get you started. These files are not guaranteed to be perfect for everyone as the files require customization. Even if you use a template, you are required to fix anything that does not meet the requirements covered in the ETD Guide. Therefore, you must consult the ETD Guide prior to electronically submitting the file to the Graduate School for review.

Styles These templates include three pre-programmed Styles–Body 1, Heading 1, and Subtitle–which are already applied to the existing headers and body text. The “Styles” box appears on the right-hand side of the “Home” tab. To apply these styles to new text, you have two options:

• Click the desired style and then type in that style.
• Highlight existing text and apply the desired style by clicking on its Style square.

ETD guidelines do allow some flexibility in formatting. You can alter these styles in the following ways:

• Change Subtitle style to be italicized instead of bold.
• Change chapter headers to be larger and move them to a different location on the page.

To alter a Style, you can do one of the following:

• Highlight your altered text, right click on the style square, and select the first option, “Update Style to Match Selection.”
• Right click on the style square and select “Modify.” 

The Heading 1 style maintains the bold setting, but you must keep all main headers ALL CAPS. Styles do not maintain this automatically. However, you can alter the font of headers to match the font you’ve chosen for your entire text (font must be consistent throughout the document). 

Table of Contents

There are different ways to create a Table of Contents page. The templates use Tabs, found in the “Paragraph” settings, which will be explained below. Alternatively, you can insert a Table of Contents from the References tab, as long as its formatting and appearance match that of the Table of Contents in the ETD Guide . In the templates, the tabs are set so that you simply need to type out a Table of Contents entry, hit “Tab” on your keyboard, and type the appropriate page number. Hitting “Tab” will create a dotted leader line that will change length as you type.

An ETD requirement is that your Table of Contents has a spacing hierarchy that differentiates main sections from subsections. This requires indenting the entry text for subsections. Since the templates already have altered Tab rules for the dotted lines, you must use the Ruler bar at the top of the page to make simple indentations. If you do not see the Ruler, go to the “View” tab and check the “Ruler” box.

In addition to the dotted line Tab settings, the templates already have a tab rule set for .5 inches from the left margin (it appears as a little black notch on the ruler bar). This allows you to indent lines with the Tab key while also maintaining the rules for dotted lines. However, if you need to indent lines further than this, to create another level of hierarchy, you must add a new Tab by clicking the ruler bar on the desired Tab location, creating a new notch on the ruler.

MS Word Template 1 (Page numbers at the top of the page) – or – MS Word Template 2 (Page numbers at the bottom of the page)

LaTeX templates

These LaTeX templates were created and supplied by fellow graduate students and faculty. Unfortunately, NCSU does not support LaTeX—meaning the NCSU Helpdesk and the Graduate School (ETD Reviewer and Webmaster) are not able to provide technical support for these files. You are encouraged to utilize your fellow classmates, your faculty, and the internet for assistance.

These templates are provided to get you started. These files are not guaranteed to be perfect for everyone as the files require customization. You are required to fix anything that does not meet the requirements set forth in the ETD Guide even if you used one of the templates. Therefore, you must use the Appendix A Checklist in the ETD Guide prior to electronically submitting the file to the Graduate School for the thesis review.

Thesis Class and Template Files:

A graduate student recently helped us update our LaTeX template to better reflect the latest ETD Guidelines. These files are linked below. If you find have issues or find errors in the updated template files, please let me know ([email protected]).

• Updated Template files

NOTE: the most common issue students have with their LaTeX ETD file is the right-hand margin; sometimes tables, figures, or lines of text extend too far right, and violate the required 1-inch margin. Prior to submitting, please ensure that all of your content fits within the main body area of the document.

There are some websites that may be helpful. A few are listed here. Do a search in your favorite search engine to discover more.

* LaTeX information Dr. Bloomfield’s Website (For information purposes only. Assistance is not offered). * LaTeX information LaTeX project site * LaTeX information Trinity College * LaTeX information University of Cambridge Department of Engineering * LaTeX information Emory University

• University of Michigan Library
• Research Guides

Microsoft Word for Dissertations

• Table of Contents
• Introduction, Template, & Resources
• Formatting for All Readers
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example
• Images, Charts, Other Objects
• Footnotes, Endnotes, & Citations
• Cross-References
• Appendix Figures & Tables
• List of Figures/Tables
• Chapter and Section Numbering
• Page Numbers
• Landscape Pages
• Combining Chapter Files
• Commenting and Reviewing
• Tips & Tricks
• The Two-inch Top Margin
• Troubleshooting
• Finalizing Without Styles
• Preparing Your Final Document
• Take a break

Automatic Table of Contents

An automatic Table of Contents relies on Styles to keep track of page numbers and section titles for you automatically. Microsoft Word can scan your document and find everything in the Heading 1 style and put that on the first level of your table of contents, put any Heading 2’s on the second level of your table of contents, and so on.

If you want an automatic table of contents you need to apply the Heading 1 style to all of your chapter titles and front matter headings (like “Dedication” and “Acknowledgements”).  All section headings within your chapters should use the Heading 2  style.  All sub-section headings should use  Heading 3 , etc....

If you have used Heading styles in your document, creating an automatic table of contents is easy.

• Place your cursor where you want your table of contents to be.
• On the References Ribbon, in the Table of Contents Group , click on the arrow next to the Table of Contents icon, and select  Custom Table of Contents .
• We suggest that you set each level (Chapters, sections, sub-sections, aka TOC 1, TOC 2, TOC 3) to be single-spaced, with 12 points of space afterwards.  This makes each item in your ToC clump together if they're long enough to wrap to a second line, with the equivalent of a double space between each item, and makes the ToC easier to read and understand than if every line were double-spaced. See the video below for details.
• If you want to change which headings appear in your Table of Contents, you can do so by changing the number in the Show levels: field. Select "1" to just include the major sections (Acknowledgements, List of Figures, Chapters, etc...).  Select "4" to include Chapters, sections, sub-sections, and sub-sub-sections.
• Click OK to insert your table of contents.  

The table of contents is a snapshot of the headings and page numbers in your document, and does not automatically update itself as you make changes. At any time, you can update it by right-clicking on it and selecting Update field .  Notice that once the table of contents is in your document, it will turn gray if you click on it. This just reminds you that it is a special field managed by Word, and is getting information from somewhere else.

Modifying the format of your Table of Contents

The video below shows how to make your Table of Contents a little easier to read by formatting the spacing between items in your Table of Contents. You may recognize the "Modify Style" window that appears, which can serve as a reminder that you can use this window to modify more than just paragraph settings in the ToC. You can modify the indent distance, or font, or tab settings for your ToC, just the same as you may have modified it for Styles. 

By default, the Table of Contents tool creates the ToC by pulling in Headings 1 through 3. If you'd like to modify that -- to only show H1's, or to show Headings 1 through 4 -- then go to the References tab and select Custom Table of Contents .  In the window that appears, set Show Levels to "1" to only show Heading 1's in the Table of Contents, or set it to "4" to show Headings 1 through 4.

Bonus tip for updating fields like the Table of Contents

You'll quickly realize that all of the automatic Lists and Tables need to be updated occasionally to reflect any changes you've made elsewhere in the document -- they do not dynamically update by themselves. Normally, this means going to each field, right-clicking on it and selecting "Update Field". 

Alternatively, to update all fields throughout your document (Figure/Table numbers & Lists, cross-references, Table of Contents, etc...), just select "Print". This will usually cause Word to update everything in anticipation of printing. Once the print preview window appears, just cancel and double-check that it updated things.

Graduate School

• Make a Gift

Organizing and Formatting Your Thesis and Dissertation

Learn about overall organization of your thesis or dissertation. Then, find details for formatting your preliminaries, text, and supplementaries.

Overall Organization

A typical thesis consists of three main parts – preliminaries, text, and supplementaries. Each part is to be organized as explained below and in the order indicated below:

1. Preliminaries:

• Title page (required)
• Copyright page (required)
• Abstract (required) only one abstract allowed
• Acknowledgments (optional) located in the Preliminary Section only
• Preface (optional)
• Autobiography (optional)
• Dedication (optional)
• Table of Contents (required)
• List of Tables (optional)
• List of Figures (optional)
• List of Plates (optional)
• List of Symbols (optional)
• List of Keywords (optional)
• Other Preliminaries (optional) such as Definition of Terms

3. Supplementaries:

• References or bibliography (optional)
• Appendices (optional)
• Glossary (optional)
• List of Abbreviations (optional)

Preliminaries

These are the general requirements for all preliminary pages.

• Preliminary pages are numbered with lower case Roman numerals.
• Page numbers are ½” from the bottom of the page and centered.
• The copyright page is included in the manuscript immediately after the title page and is not assigned a page number nor counted.
• The abstract page is numbered with the Roman numeral “ii”.
• The remaining preliminary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all preliminary pages must be centered in all capital letters 1” from the top of the page.
• Do not bold the headings of the preliminary pages.

A sample Thesis title page pdf is available here ,  and a sample of a Dissertation title page pdf is available here.

Refer to the sample page as you read through the format requirements for the title page.

• Do not use bold.
• Center all text except the advisor and committee information.

The heading “ Thesis ” or “ Dissertation ” is in all capital letters, centered one inch from the top of the page.

• Your title must be in all capital letters, double spaced and centered.
• Your title on the title page must match the title on your GS30 – Thesis/Dissertation Submission Form

Submitted by block

Divide this section exactly as shown on the sample page. One blank line must separate each line of text.

• Submitted by
• School of Advanced Materials Discovery 
• School of Biomedical Engineering
• Graduate Degree Program in Cell and Molecular Biology
• Graduate Degree Program in Ecology

If your department name begins with “School of”, list as:

• School of Education
• School of Music, Theatre and Dance
• School of Social Work

If you have questions about the correct name of your department or degree, consult your department. Areas of Study or specializations within a program are not listed on the Title Page.

Degree and Graduating Term block

• In partial fulfillment of the requirements
• For the Degree of
• Colorado State University
• Fort Collins, Colorado (do not abbreviate Colorado)

Committee block

• Master’s students will use the heading Master’s Committee:
• Doctoral students will use the heading Doctoral Committee:
• The Master’s Committee and Doctoral Committee headings begin at the left margin.
• One blank line separates the committee heading and the advisor section.
• One blank line separates the advisor and committee section.
• Advisor and committee member names are indented approximately half an inch from the left margin.
• Titles before or after the names of your advisor and your members are not permitted (Examples – Dr., Professor, Ph.D.).

Copyright Page

• A sample copyright page pdf is available here.
• A copyright page is required.
• A copyright page is included in the manuscript immediately after the title page.
• This page is not assigned a number nor counted.
• Center text vertically and horizontally.
• A sample abstract page pdf is available here – refer to the sample page as you read through the format requirements for the abstract.
• Only one abstract is permitted.
• The heading “ Abstract ” is in all capital letters, centered one inch from the top of the page.
• Three blank lines (single-spaced) must be between the “ Abstract ” heading and your title.
• Your title must be in all capital letters and centered.
• The title must match the title on your Title Page and the GS30 – Thesis/Dissertation Submission Form
• Three blank lines (single-spaced) must be between the title and your text.
• The text of your abstract must be double-spaced.
• The first page of the abstract is numbered with a small Roman numeral ii.

Table of Contents

• A sample Table of Contents page pdf is available.
• The heading “ Table of Contents ” is in all capital letters centered one inch from the top of the page.
• Three blank lines (single-spaced) follow the heading.
• List all parts of the document (except the title page) and the page numbers on which each part begins.
• The titles of all parts are worded exactly as they appear in the document.
• Titles and headings and the page numbers on which they begin are separated by a row of dot leaders.
• Major headings are aligned flush with the left margin.
• Page numbers are aligned flush with the right margin.

The text of a thesis features an introduction and several chapters, sections and subsections. Text may also include parenthetical references, footnotes, or references to the bibliography or endnotes.

Any references to journal publications, authors, contributions, etc. on your chapter pages or major heading pages should be listed as a footnote .

• The entire document is 8.5” x 11” (letter) size.
• Pages may be in landscape position for figures and tables that do not fit in “portrait” position.
• Choose one type style (font) and font size and use it throughout the text of your thesis. Examples: Times New Roman and Arial.
• Font sizes should be between 10 point and 12 point.
• Font color must be black. 
• Hyperlinked text must be in blue. If you hyperlink more than one line of text, such as the entire table of contents, leave the text black. 
• Margins are one inch on all sides (top, bottom, left, and right).
• Always continue the text to the bottom margin except at the end of a chapter.

• Please see preliminary page requirements .
• Body and references are numbered with Arabic numerals beginning with the first page of text (numbered 1).
• Page numbers must be centered ½” from the bottom of the page.

Major Headings

• A sample page pdf for major headings and subheadings is available here.
• Use consistent style for major headings.
• Three blank lines (single-spaced) need to be between the major heading and your text.
• Each chapter is started on a new page.
• The References or Bibliography heading is a major heading and the formatting needs to match chapter headings.

Subheadings

• A sample page pdf for major headings and subheadings is available here .
• Style for subheadings is optional but the style should be consistent throughout.
• Subheadings within a chapter (or section) do not begin on a new page unless the preceding page is filled. Continue the text to the bottom of the page unless at the end of a chapter.
• Subheadings at the bottom of a page require two lines of text following the heading and at least two lines of text on the next page.

Running Head

Do not insert a running head.

When dividing paragraphs, at least two lines of text should appear at the bottom of the page and at least two lines of text on the next page.

Hyphenation

The last word on a page may not be divided. No more than three lines in succession may end with hyphens. Divide words as indicated in a standard dictionary.

• The text of the thesis is double-spaced.
• Bibliography or list of reference entries and data within large tables may be single-spaced. Footnotes should be single spaced.
• Footnotes and bibliography or list of reference entries are separated by double-spacing.
• Quoted material of more than three lines is indented and single-spaced. Quoted material that is three lines or fewer may be single-spaced for emphasis.

Poems should be double-spaced with triple-spacing between stanzas. Stanzas may be centered if lines are short.

• Consult a style manual approved by your department for samples of footnotes.
• Footnotes are numbered consecutively throughout the entire thesis.
• Footnotes appear at the bottom of the page on which the reference is made.
• Footnotes are single-spaced.
• Consult a style manual approved by your department for samples of endnotes.
• Endnotes are numbered consecutively throughout the entire thesis.
• Endnotes may be placed at the end of each chapter or following the last page of text.
• The form for an endnote is the same as a footnote. Type the heading “endnote”.

Tables and Figures

• Tables and figures should follow immediately after first mentioned in the text or on the next page.
• If they are placed on the next page, continue the text to the bottom of the preceding page.
• Do not wrap text around tables or figures. Text can go above and/or below.
• If more clarity is provided by placing tables and figures at the end of chapters or at the end of the text, this format is also acceptable.
• Tables and Figures are placed before references.
• Any diagram, drawing, graph, chart, map, photograph, or other type of illustration is presented in the thesis as a figure.
• All tables and figures must conform to margin requirements.
• Images can be resized to fit within margins
• Table captions go above tables.
• Figure captions go below figures.
• Captions must be single spaced.

Landscape Tables and Figures

• Large tables or figures can be placed on the page landscape or broadside orientation.
• Landscape tables and figures should face the right margin (unbound side).
• The top margin must be the same as on a regular page.
• Page numbers for landscape or broadside tables or figures are placed on the 11” side.

Supplementaries

These are the general requirements for all supplementary pages.

• Supplementary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all supplementary pages are major headings and the formatting style needs to match chapter headings.

References or Bibliography

• The References or Bibliography heading is always a major heading and the formatting style needs to match chapter headings.
• References or Bibliography are ordered after each chapter, or at the end of the text.
• References or Bibliography must start on a new page from the chapter text.
• References are aligned flush with the left margin.
• The style for references should follow the format appropriate for the field of study.
• The style used must be consistent throughout the thesis.
• Appendices are optional and used for supplementary material.
• The Appendices heading is a major heading and the formatting style needs to match chapter headings.
• As an option the appendix may be introduced with a cover page bearing only the title centered vertically and horizontally on the page. The content of the appendix then begins on the second page with the standard one inch top margin.
• Quality and format should be consistent with requirements for other parts of the thesis including margins.
• Page numbers used in the appendix must continue from the main text.

A Foreign Language Thesis

Occasionally, theses are written in languages other than English. In such cases, an English translation of the title and abstract must be included in the document.

• Submit one title page in the non-English language (no page number printed).
• Submit one title page in English (no page number printed).
• Submit one abstract in the non-English language (page number is ii).
• Submit one abstract in English (page number is numbered consecutively from previous page – example: if the last page of the abstract in the foreign language is page ii the first page of the abstract in English is numbered page iii).

Multipart Thesis

In some departments, a student may do research on two or more generally related areas which would be difficult to combine into a single well-organized thesis. The solution is the multi-part thesis.

• Each part is considered a separate unit, with its own chapters, bibliography or list of references, and appendix (optional); or it may have a combined bibliography or list of references and appendix.
• A single abstract is required.
• The pages of a multi-part thesis are numbered consecutively throughout the entire thesis, not through each part (therefore, the first page of Part II is not page 1).
• The chapter numbering begins with Chapter 1 for each part, or the chapters may be numbered consecutively.
• Pagination is consecutive throughout all parts, including numbered separation sheets between parts.
• Each part may be preceded by a separation sheet listing the appropriate number and title.

Ohio State nav bar

• The Ohio State University
• BuckeyeLink
• Find People
• Search Ohio State

Formatting Guidelines For Theses, Dissertations, and DMA Documents

Guidelines for Formatting Theses, Dissertations, and DMA Documents is intended to help graduate students present the results of their research in the form of a scholarly document.

Before beginning to write a master’s thesis, PhD dissertation, or DMA document, students should read the relevant sections of the  Graduate School Handbook, section 7.8  for dissertations and/ or  section 6.4  for master’s theses.

Candidates for advanced degrees should also confer with their advisors and members of their graduate studies committees to learn about any special departmental requirements for preparing graduate degree documents.

Members of the graduation services staff at the Graduate School are available to provide information and to review document drafts at any stage of the planning or writing process. While graduation services is responsible for certifying that theses and/or dissertations have been prepared in accordance with Graduate School guidelines, the student bears the ultimate responsibility for meeting these requirements and resolving any related technical and/or software issues . Graduation services will not accept documents if required items are missing or extend deadlines because of miscommunication between the student and the advisor.

Accessibility Features

As of Spring, 2023, all theses and dissertations will need to incorporate the following accessibility features to align with the university’s accessibility policy.  When you submit your final document to OhioLINK you will be verifying that accessibility features have been applied.

• PDF file includes full text
• PDF accessibility permission flag is checked
• Text language of the PDF is specified
• PDF includes a title

Features and Other Notes

Some features are required, and some are optional. Each component is identified with a major heading unless otherwise noted. The major heading must be centered with a one-inch top margin. 

Sample Pages and Templates

Templates are available for use in formatting dissertations, theses, and DMA documents. Please read all instructions before beginning. 

• Graduate Dissertations and Theses Templates - OSU Login Required

FRONTISPIECE (OPTIONAL)

If used, no heading is included on this page.

TITLE PAGE (REQUIRED)

The title page should include:

• the use of title case is recommended
• dissertation, DMA. document, or thesis
• Presented in Partial Fulfillment of the Requirements for the Degree [insert the applicable degree such as Doctor of Philosophy, Doctor of Musical Arts, Master of Science, etc.] in the Graduate School of The Ohio State University
• Name of the candidate 
• Initials of previous earned degrees
• insert correct name from program directory
• Year of graduation
•  Dissertation, document, or thesis [select applicable title] committee and committee member names

COPYRIGHT PAGE (REQUIRED)

Notice of copyright is centered in the following format on the page immediately after the title page. This page is not identified with a page number.

Copyright by John James Doe 2017

ABSTRACT (REQUIRED)

The heading Abstract is centered without punctuation at least one inch from the top of the page. The actual abstract begins four spaces below the heading. See sample pages.

DEDICATION (OPTIONAL)

If used, the dedication must be brief and centered on the page.

ACKNOWLEDGMENTS

(OPTIONAL, BUT STRONGLY RECOMMENDED)

Either spelling of the word, acknowledgments or acknowledgments, is acceptable. The acknowledgment is a record of the author’s indebtedness and includes notice of permission to use previously copyrighted materials that appear extensively in the text. The heading Acknowledgments is centered without punctuation at least one inch from the top of the page.

VITA (REQUIRED)

Begin the page with the heading Vita, centered, without punctuation, and at least one inch from the top of the page. There are three sections to the vita: biographical information (required), publications (if applicable), and fields of study (required).

There is no subheading used for the biographical information section. In this section, include education and work related to the degree being received.

Use leader dots between the information and dates. The publication section follows. The subheading Publications should be centered and in title case. List only those items published in a book or journal. If there are none, omit the Publication subheading. The final section of the vita is Fields of Study, which is required. Center the subheading and use title case. Two lines below the Fields of Study subheading, place the following statement: Major Field: [insert only the name of your Graduate Program as it reads on the title page] flush left. Any specialization you would like to include is optional and is placed flush left on the lines below Major Field.

TABLE OF CONTENTS (REQUIRED)

The heading Table of Contents (title case preferred) appears without punctuation centered at least one inch from the top of the page. The listing of contents begins at the left margin four spaces below the heading. The titles of all parts, sections, chapter numbers, and chapters are listed and must

be worded exactly as they appear in the body of the document. The table of contents must include any appendices and their titles, if applicable. Use leader dots between the listed items and their page numbers.

LISTS OF ILLUSTRATIONS (REQUIRED IF APPLICABLE)

Lists of illustrations are required if the document contains illustrations. The headings List of Tables , List of Figures , or other appropriate illustration designations (title case preferred) appear centered without punctuation at least one inch from the top of the page. The listing begins at the left margin four spaces below the heading. Illustrations should be identified by the same numbers and captions in their respective lists as they have been assigned in the document itself. Use leader dots between the listed items and their page numbers. See sample pages .

BIBLIOGRAPHY/REFERENCES (REQUIRED)

Include a complete bibliography or reference section at the end of the document, before the appendix, even if you have included references at the end of each chapter. You may decide how this section should be titled. The terms References or Bibliography are the most commonly chosen titles. The heading must be centered and at least one inch from the top of the page.

Include this heading in the table of contents.

APPENDICES (REQUIRED IF APPLICABLE)

An appendix, or appendices, must be placed after the bibliography. The heading Appendix (title case preferred) centered at least one inch from the top of the page. Appendices are identified with letters and titles. For example: Appendix A: Data. Include all appendix headers and titles in the table of contents.

Other Notes

Candidates are free to select a style suitable to their discipline as long as it complies with the format and content guidelines given in this publication. Where a style manual conflicts with Graduate School guidelines, the Graduate School guidelines take precedence. Once chosen, the style must remain consistent throughout the document.

Top, bottom, left, and right page margins should all be set at one inch. (Keep in mind that the left margin is the binding edge, so if you want to have a bound copy produced for your personal use, it is recommended that the left margin be 1.5 inches.)

It is recommended that any pages with a major header, such as document title, chapter/major section titles, preliminary page divisions, abstract, appendices, and references at the end of the document be set with a 2-inch top margin for aesthetic purposes and to help the reader identify that a new major section is beginning.

The selected font should be 10 to 12 point and be readable. The font should be consistent throughout the document. Captions, endnotes, footnotes, and long quotations may be slightly smaller than text font, as long as the font is readable.

Double spacing is preferred, but 1.5 spacing (1.5 × the type size) is acceptable for long documents. Single spacing is recommended for bibliography entries, long quotations, long endnotes or footnotes, and long captions. Double spacing between each bibliography entry is recommended.

Each major division of the document, including appendices, must have a title. Titles must be centered and have at least a one inch top margin. The use of title case is recommended. If chapters are being used, they should be numbered and titled. For example: Chapter 1: Introduction. Appendices are identified with letters and titles. For example: Appendix A: Data.

PAGE NUMBERS

Every page must have a page number except the title page and the copyright page. If a frontispiece is included before the title page, it is neither counted nor numbered. The page numbers are centered at the bottom center of the page above the one inch margin. Note: You may need to set the footer margin to 1-inch and the body bottom margin to 1.3 or 1.5- inches to place the page number accurately.

Preliminary pages (abstract, dedication, acknowledgments, vita, table of contents, and the lists of illustrations, figures, etc.) are numbered with small Roman numerals (i, ii, iii, iv, etc.). Page numbering begins with the first page of the abstract, and this can be either page i or ii (The title page is technically page i, but the number is not shown on the page).

Arabic numerals are used for the remainder of the document, including the text and the reference material. These pages are numbered consecutively beginning with 1 and continue through the end of the document.

Notation practices differ widely among publications in the sciences, the humanities, and the social sciences. Candidates should confer with their advisors regarding accepted practice in their individual disciplines. That advice should be coupled with careful reference to appropriate general style manuals.

• Arabic numerals should be used to indicate a note in the text. 
• Notes may be numbered in one of two ways: either consecutively throughout the entire manuscript or consecutively within each chapter.
• Notes can be placed at the bottom of the page (footnotes) or at the end of a chapter or document (endnotes). Once chosen, the notation style must be consistent throughout the document.
• Notes about information within tables should be placed directly below the table to which they apply, not at the bottom of the page along with notes to the text.

ILLUSTRATIONS

Tables, figures, charts, graphs, photos, etc..

Some documents include several types of illustrations. In such cases, it is necessary that each type of illustration (table, figure, chart, etc.) be identified with a different numbering series (Table 1, Table 2, and so on, or Chart 1, Chart 2, and so on). For each series, include a list with captions and page numbers in the preliminary pages (for example, List of Tables, List of Charts, etc.). These lists must be identified with major headings that are centered and placed at the two-inch margin.

Each illustration must be identified with a caption that includes the type of illustration, the number, and a descriptive title (for example, Map 1: Ohio). Numbering may be sequential throughout the document (including the appendix, if applicable) or based on the decimal system (corresponding to the chapter number, such as Map 2.3: Columbus). When using decimal numbering in an appendix, the illustration is given a letter that corresponds with the appendix letter (for example, Figure A.1: Voter Data). Captions can be placed either above or below the illustration, but be consistent with the format throughout the document. If a landscape orientation of the illustration is used, make sure to also orient the illustration number and caption accordingly. The top of the illustration should be placed on the left (binding) edge of the page.

If an illustration is too large to ft on one page it is recommended that you identify the respective pages as being part of one illustration. Using a “continued” notation is one method. For example, the phrase continued is placed under the illustration on the bottom right hand side of the first page. On the following pages, include the illustration type, number, and the word continued at the top left margin; for example, Map 2: Continued. Whatever method you choose just make sure to be consistent. The caption for the illustration should be on the first page, but this does not need repeated on subsequent pages.

If an illustration is placed on a page with text, between the text and the top and/or bottom of the illustration, there must be three single spaced lines or two double spaced lines of blank space. The same spacing rule applies if there are multiple illustrations on the same page. The top/bottom of the illustration includes the caption.

All final Ph.D. dissertations, DMA. documents, and master’s theses are submitted to the Graduate School through OhioLINK at https://etdadmin. ohiolink.edu. The document must be saved in PDF embedded font format (PDF/A) before beginning the upload at OhioLINK. During the submission process, OhioLINK will require an abstract separate from your document. This abstract has a 500-word limit. You will get a confirmation from OhioLINK that the submission is complete. The submission then goes to the Graduate School for review. After it is reviewed by staff of the Graduate School, you will receive an email that it has been accepted or that changes need to be made. If changes are required, you will need to re-submit the revised document via an amended OhioLINK submission. You will receive an “accepted” email from the Graduate School once the document has been approved.

THESIS OR DISSERTATION IN A FOREIGN LANGUAGE

The Graduate School has no policy specifically permitting graduate degree documents to be written in a foreign language. The practice is allowed as long as it is approved by the student’s advisor and Graduate Studies Committee. Documents in a foreign language must comply with the following requirements:

• The title page must be in English, but the title itself may be in the same language as the document.
• If the title is in a language using other than Roman characters, it must be transliterated into Roman character equivalents.
• The abstract must be in English.
• The academic unit must notify the Graduate School of dissertations in a foreign language so that an appropriate graduate faculty representative can be found to participate in the final oral examination

Dissertation and Theses

The dissertation is the hallmark of the research expertise demonstrated by a doctoral student. It is a scholarly contribution to knowledge in the student’s area of specialization. 

A thesis is a hallmark of some master’s programs. It is a piece of original research, generally less comprehensive than a dissertation and is meant to show the student’s knowledge of an area of specialization.

Still Have Questions?

Dissertations & Theses 614-292-6031 [email protected]

Doctoral Exams, Master's Examination, Graduation Requirements 614-292-6031 [email protected]