how to write the abstract of a master thesis

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Prevent plagiarism, run a free check.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 3 June 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 412 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

How To Write A Dissertation Or Thesis

8 straightforward steps to craft an a-grade dissertation.

By: Derek Jansen (MBA) Expert Reviewed By: Dr Eunice Rautenbach | June 2020

Writing a dissertation or thesis is not a simple task. It takes time, energy and a lot of will power to get you across the finish line. It’s not easy – but it doesn’t necessarily need to be a painful process. If you understand the big-picture process of how to write a dissertation or thesis, your research journey will be a lot smoother.  

In this post, I’m going to outline the big-picture process of how to write a high-quality dissertation or thesis, without losing your mind along the way. If you’re just starting your research, this post is perfect for you. Alternatively, if you’ve already submitted your proposal, this article which covers how to structure a dissertation might be more helpful.

How To Write A Dissertation: 8 Steps

• Clearly understand what a dissertation (or thesis) is
• Find a unique and valuable research topic
• Craft a convincing research proposal
• Write up a strong introduction chapter
• Review the existing literature and compile a literature review
• Design a rigorous research strategy and undertake your own research
• Present the findings of your research
• Draw a conclusion and discuss the implications

Step 1: Understand exactly what a dissertation is

This probably sounds like a no-brainer, but all too often, students come to us for help with their research and the underlying issue is that they don’t fully understand what a dissertation (or thesis) actually is.

So, what is a dissertation?

At its simplest, a dissertation or thesis is a formal piece of research , reflecting the standard research process . But what is the standard research process, you ask? The research process involves 4 key steps:

• Ask a very specific, well-articulated question (s) (your research topic)
• See what other researchers have said about it (if they’ve already answered it)
• If they haven’t answered it adequately, undertake your own data collection and analysis in a scientifically rigorous fashion
• Answer your original question(s), based on your analysis findings

In short, the research process is simply about asking and answering questions in a systematic fashion . This probably sounds pretty obvious, but people often think they’ve done “research”, when in fact what they have done is:

• Started with a vague, poorly articulated question
• Not taken the time to see what research has already been done regarding the question
• Collected data and opinions that support their gut and undertaken a flimsy analysis
• Drawn a shaky conclusion, based on that analysis

If you want to see the perfect example of this in action, look out for the next Facebook post where someone claims they’ve done “research”… All too often, people consider reading a few blog posts to constitute research. Its no surprise then that what they end up with is an opinion piece, not research. Okay, okay – I’ll climb off my soapbox now.

The key takeaway here is that a dissertation (or thesis) is a formal piece of research, reflecting the research process. It’s not an opinion piece , nor a place to push your agenda or try to convince someone of your position. Writing a good dissertation involves asking a question and taking a systematic, rigorous approach to answering it.

If you understand this and are comfortable leaving your opinions or preconceived ideas at the door, you’re already off to a good start!

Step 2: Find a unique, valuable research topic

As we saw, the first step of the research process is to ask a specific, well-articulated question. In other words, you need to find a research topic that asks a specific question or set of questions (these are called research questions ). Sounds easy enough, right? All you’ve got to do is identify a question or two and you’ve got a winning research topic. Well, not quite…

A good dissertation or thesis topic has a few important attributes. Specifically, a solid research topic should be:

Let’s take a closer look at these:

Attribute #1: Clear

Your research topic needs to be crystal clear about what you’re planning to research, what you want to know, and within what context. There shouldn’t be any ambiguity or vagueness about what you’ll research.

Here’s an example of a clearly articulated research topic:

An analysis of consumer-based factors influencing organisational trust in British low-cost online equity brokerage firms.

As you can see in the example, its crystal clear what will be analysed (factors impacting organisational trust), amongst who (consumers) and in what context (British low-cost equity brokerage firms, based online).

Need a helping hand?

Attribute #2:   Unique

Your research should be asking a question(s) that hasn’t been asked before, or that hasn’t been asked in a specific context (for example, in a specific country or industry).

For example, sticking organisational trust topic above, it’s quite likely that organisational trust factors in the UK have been investigated before, but the context (online low-cost equity brokerages) could make this research unique. Therefore, the context makes this research original.

One caveat when using context as the basis for originality – you need to have a good reason to suspect that your findings in this context might be different from the existing research – otherwise, there’s no reason to warrant researching it.

Attribute #3: Important

Simply asking a unique or original question is not enough – the question needs to create value. In other words, successfully answering your research questions should provide some value to the field of research or the industry. You can’t research something just to satisfy your curiosity. It needs to make some form of contribution either to research or industry.

For example, researching the factors influencing consumer trust would create value by enabling businesses to tailor their operations and marketing to leverage factors that promote trust. In other words, it would have a clear benefit to industry.

So, how do you go about finding a unique and valuable research topic? We explain that in detail in this video post – How To Find A Research Topic . Yeah, we’ve got you covered 😊

Step 3: Write a convincing research proposal

Once you’ve pinned down a high-quality research topic, the next step is to convince your university to let you research it. No matter how awesome you think your topic is, it still needs to get the rubber stamp before you can move forward with your research. The research proposal is the tool you’ll use for this job.

So, what’s in a research proposal?

The main “job” of a research proposal is to convince your university, advisor or committee that your research topic is worthy of approval. But convince them of what? Well, this varies from university to university, but generally, they want to see that:

• You have a clearly articulated, unique and important topic (this might sound familiar…)
• You’ve done some initial reading of the existing literature relevant to your topic (i.e. a literature review)
• You have a provisional plan in terms of how you will collect data and analyse it (i.e. a methodology)

At the proposal stage, it’s (generally) not expected that you’ve extensively reviewed the existing literature , but you will need to show that you’ve done enough reading to identify a clear gap for original (unique) research. Similarly, they generally don’t expect that you have a rock-solid research methodology mapped out, but you should have an idea of whether you’ll be undertaking qualitative or quantitative analysis , and how you’ll collect your data (we’ll discuss this in more detail later).

Long story short – don’t stress about having every detail of your research meticulously thought out at the proposal stage – this will develop as you progress through your research. However, you do need to show that you’ve “done your homework” and that your research is worthy of approval .

So, how do you go about crafting a high-quality, convincing proposal? We cover that in detail in this video post – How To Write A Top-Class Research Proposal . We’ve also got a video walkthrough of two proposal examples here .

Step 4: Craft a strong introduction chapter

Once your proposal’s been approved, its time to get writing your actual dissertation or thesis! The good news is that if you put the time into crafting a high-quality proposal, you’ve already got a head start on your first three chapters – introduction, literature review and methodology – as you can use your proposal as the basis for these.

Handy sidenote – our free dissertation & thesis template is a great way to speed up your dissertation writing journey.

What’s the introduction chapter all about?

The purpose of the introduction chapter is to set the scene for your research (dare I say, to introduce it…) so that the reader understands what you’ll be researching and why it’s important. In other words, it covers the same ground as the research proposal in that it justifies your research topic.

What goes into the introduction chapter?

This can vary slightly between universities and degrees, but generally, the introduction chapter will include the following:

• A brief background to the study, explaining the overall area of research
• A problem statement , explaining what the problem is with the current state of research (in other words, where the knowledge gap exists)
• Your research questions – in other words, the specific questions your study will seek to answer (based on the knowledge gap)
• The significance of your study – in other words, why it’s important and how its findings will be useful in the world

As you can see, this all about explaining the “what” and the “why” of your research (as opposed to the “how”). So, your introduction chapter is basically the salesman of your study, “selling” your research to the first-time reader and (hopefully) getting them interested to read more.

How do I write the introduction chapter, you ask? We cover that in detail in this post .

Step 5: Undertake an in-depth literature review

As I mentioned earlier, you’ll need to do some initial review of the literature in Steps 2 and 3 to find your research gap and craft a convincing research proposal – but that’s just scratching the surface. Once you reach the literature review stage of your dissertation or thesis, you need to dig a lot deeper into the existing research and write up a comprehensive literature review chapter.

What’s the literature review all about?

There are two main stages in the literature review process:

Literature Review Step 1: Reading up

The first stage is for you to deep dive into the existing literature (journal articles, textbook chapters, industry reports, etc) to gain an in-depth understanding of the current state of research regarding your topic. While you don’t need to read every single article, you do need to ensure that you cover all literature that is related to your core research questions, and create a comprehensive catalogue of that literature , which you’ll use in the next step.

Reading and digesting all the relevant literature is a time consuming and intellectually demanding process. Many students underestimate just how much work goes into this step, so make sure that you allocate a good amount of time for this when planning out your research. Thankfully, there are ways to fast track the process – be sure to check out this article covering how to read journal articles quickly .

Literature Review Step 2: Writing up

Once you’ve worked through the literature and digested it all, you’ll need to write up your literature review chapter. Many students make the mistake of thinking that the literature review chapter is simply a summary of what other researchers have said. While this is partly true, a literature review is much more than just a summary. To pull off a good literature review chapter, you’ll need to achieve at least 3 things:

• You need to synthesise the existing research , not just summarise it. In other words, you need to show how different pieces of theory fit together, what’s agreed on by researchers, what’s not.
• You need to highlight a research gap that your research is going to fill. In other words, you’ve got to outline the problem so that your research topic can provide a solution.
• You need to use the existing research to inform your methodology and approach to your own research design. For example, you might use questions or Likert scales from previous studies in your your own survey design .

As you can see, a good literature review is more than just a summary of the published research. It’s the foundation on which your own research is built, so it deserves a lot of love and attention. Take the time to craft a comprehensive literature review with a suitable structure .

But, how do I actually write the literature review chapter, you ask? We cover that in detail in this video post .

Step 6: Carry out your own research

Once you’ve completed your literature review and have a sound understanding of the existing research, its time to develop your own research (finally!). You’ll design this research specifically so that you can find the answers to your unique research question.

There are two steps here – designing your research strategy and executing on it:

1 – Design your research strategy

The first step is to design your research strategy and craft a methodology chapter . I won’t get into the technicalities of the methodology chapter here, but in simple terms, this chapter is about explaining the “how” of your research. If you recall, the introduction and literature review chapters discussed the “what” and the “why”, so it makes sense that the next point to cover is the “how” –that’s what the methodology chapter is all about.

In this section, you’ll need to make firm decisions about your research design. This includes things like:

• Your research philosophy (e.g. positivism or interpretivism )
• Your overall methodology (e.g. qualitative , quantitative or mixed methods)
• Your data collection strategy (e.g. interviews , focus groups, surveys)
• Your data analysis strategy (e.g. content analysis , correlation analysis, regression)

If these words have got your head spinning, don’t worry! We’ll explain these in plain language in other posts. It’s not essential that you understand the intricacies of research design (yet!). The key takeaway here is that you’ll need to make decisions about how you’ll design your own research, and you’ll need to describe (and justify) your decisions in your methodology chapter.

2 – Execute: Collect and analyse your data

Once you’ve worked out your research design, you’ll put it into action and start collecting your data. This might mean undertaking interviews, hosting an online survey or any other data collection method. Data collection can take quite a bit of time (especially if you host in-person interviews), so be sure to factor sufficient time into your project plan for this. Oftentimes, things don’t go 100% to plan (for example, you don’t get as many survey responses as you hoped for), so bake a little extra time into your budget here.

Once you’ve collected your data, you’ll need to do some data preparation before you can sink your teeth into the analysis. For example:

• If you carry out interviews or focus groups, you’ll need to transcribe your audio data to text (i.e. a Word document).
• If you collect quantitative survey data, you’ll need to clean up your data and get it into the right format for whichever analysis software you use (for example, SPSS, R or STATA).

Once you’ve completed your data prep, you’ll undertake your analysis, using the techniques that you described in your methodology. Depending on what you find in your analysis, you might also do some additional forms of analysis that you hadn’t planned for. For example, you might see something in the data that raises new questions or that requires clarification with further analysis.

The type(s) of analysis that you’ll use depend entirely on the nature of your research and your research questions. For example:

• If your research if exploratory in nature, you’ll often use qualitative analysis techniques .
• If your research is confirmatory in nature, you’ll often use quantitative analysis techniques
• If your research involves a mix of both, you might use a mixed methods approach

Again, if these words have got your head spinning, don’t worry! We’ll explain these concepts and techniques in other posts. The key takeaway is simply that there’s no “one size fits all” for research design and methodology – it all depends on your topic, your research questions and your data. So, don’t be surprised if your study colleagues take a completely different approach to yours.

Step 7: Present your findings

Once you’ve completed your analysis, it’s time to present your findings (finally!). In a dissertation or thesis, you’ll typically present your findings in two chapters – the results chapter and the discussion chapter .

What’s the difference between the results chapter and the discussion chapter?

While these two chapters are similar, the results chapter generally just presents the processed data neatly and clearly without interpretation, while the discussion chapter explains the story the data are telling  – in other words, it provides your interpretation of the results.

For example, if you were researching the factors that influence consumer trust, you might have used a quantitative approach to identify the relationship between potential factors (e.g. perceived integrity and competence of the organisation) and consumer trust. In this case:

• Your results chapter would just present the results of the statistical tests. For example, correlation results or differences between groups. In other words, the processed numbers.
• Your discussion chapter would explain what the numbers mean in relation to your research question(s). For example, Factor 1 has a weak relationship with consumer trust, while Factor 2 has a strong relationship.

Depending on the university and degree, these two chapters (results and discussion) are sometimes merged into one , so be sure to check with your institution what their preference is. Regardless of the chapter structure, this section is about presenting the findings of your research in a clear, easy to understand fashion.

Importantly, your discussion here needs to link back to your research questions (which you outlined in the introduction or literature review chapter). In other words, it needs to answer the key questions you asked (or at least attempt to answer them).

For example, if we look at the sample research topic:

In this case, the discussion section would clearly outline which factors seem to have a noteworthy influence on organisational trust. By doing so, they are answering the overarching question and fulfilling the purpose of the research .

For more information about the results chapter , check out this post for qualitative studies and this post for quantitative studies .

Step 8: The Final Step Draw a conclusion and discuss the implications

Last but not least, you’ll need to wrap up your research with the conclusion chapter . In this chapter, you’ll bring your research full circle by highlighting the key findings of your study and explaining what the implications of these findings are.

What exactly are key findings? The key findings are those findings which directly relate to your original research questions and overall research objectives (which you discussed in your introduction chapter). The implications, on the other hand, explain what your findings mean for industry, or for research in your area.

Sticking with the consumer trust topic example, the conclusion might look something like this:

Key findings

This study set out to identify which factors influence consumer-based trust in British low-cost online equity brokerage firms. The results suggest that the following factors have a large impact on consumer trust:

While the following factors have a very limited impact on consumer trust:

Notably, within the 25-30 age groups, Factors E had a noticeably larger impact, which may be explained by…

Implications

The findings having noteworthy implications for British low-cost online equity brokers. Specifically:

The large impact of Factors X and Y implies that brokers need to consider….

The limited impact of Factor E implies that brokers need to…

As you can see, the conclusion chapter is basically explaining the “what” (what your study found) and the “so what?” (what the findings mean for the industry or research). This brings the study full circle and closes off the document.

Let’s recap – how to write a dissertation or thesis

You’re still with me? Impressive! I know that this post was a long one, but hopefully you’ve learnt a thing or two about how to write a dissertation or thesis, and are now better equipped to start your own research.

To recap, the 8 steps to writing a quality dissertation (or thesis) are as follows:

• Understand what a dissertation (or thesis) is – a research project that follows the research process.
• Find a unique (original) and important research topic
• Craft a convincing dissertation or thesis research proposal
• Write a clear, compelling introduction chapter
• Undertake a thorough review of the existing research and write up a literature review
• Undertake your own research
• Present and interpret your findings

Once you’ve wrapped up the core chapters, all that’s typically left is the abstract , reference list and appendices. As always, be sure to check with your university if they have any additional requirements in terms of structure or content.  

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

20 Comments

thankfull >>>this is very useful

Thank you, it was really helpful

unquestionably, this amazing simplified way of teaching. Really , I couldn’t find in the literature words that fully explicit my great thanks to you. However, I could only say thanks a-lot.

Great to hear that – thanks for the feedback. Good luck writing your dissertation/thesis.

This is the most comprehensive explanation of how to write a dissertation. Many thanks for sharing it free of charge.

Very rich presentation. Thank you

Thanks Derek Jansen|GRADCOACH, I find it very useful guide to arrange my activities and proceed to research!

Thank you so much for such a marvelous teaching .I am so convinced that am going to write a comprehensive and a distinct masters dissertation

It is an amazing comprehensive explanation

This was straightforward. Thank you!

I can say that your explanations are simple and enlightening – understanding what you have done here is easy for me. Could you write more about the different types of research methods specific to the three methodologies: quan, qual and MM. I look forward to interacting with this website more in the future.

Thanks for the feedback and suggestions 🙂

Hello, your write ups is quite educative. However, l have challenges in going about my research questions which is below; *Building the enablers of organisational growth through effective governance and purposeful leadership.*

Very educating.

Just listening to the name of the dissertation makes the student nervous. As writing a top-quality dissertation is a difficult task as it is a lengthy topic, requires a lot of research and understanding and is usually around 10,000 to 15000 words. Sometimes due to studies, unbalanced workload or lack of research and writing skill students look for dissertation submission from professional writers.

Thank you 💕😊 very much. I was confused but your comprehensive explanation has cleared my doubts of ever presenting a good thesis. Thank you.

thank you so much, that was so useful

Hi. Where is the excel spread sheet ark?

could you please help me look at your thesis paper to enable me to do the portion that has to do with the specification

my topic is “the impact of domestic revenue mobilization.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Thesis Abstract: Writing Techniques and Guidelines

Thesis Abstract Writing Guidelines

Tips on how to write dissertation abstract.

• Three key elements of a Thesis Abstract

Results and Conclusion

Thesis abstract process of writing, dissertation / thesis abstract examples, undergraduate level thesis abstract example, graduate level thesis abstract example.

Thesis abstract is an essential part of the dissertation paper. It is a summary of a complete work. It gives readers a chance to discover the key points of your dissertation, its research chapter, methodology and results part. Writing a proper abstract is important. Students use various techniques and guidelines to perform a perfect thesis abstract. Proper structure and of thesis dissertation is crucial. It should answer all the study’s questions and be written to identify a major element of a dissertation or thesis paper. Also check other thesis writing tips that will lead you to success or contact our thesis writing service to get professional help with Ph.D. work.

Thesis abstract (same as dissertation abstract ) answers the main questions of an entire paper. This short summary is a single page of text. It needs to show key methods used in a work, problems analyzed and gathered outcomes of a complex research work. This kind of academic assignment requires profound knowledge. People, who read abstracts, prefer those summaries that remain short, but very informative, with presented limitations in research and clear study results.

How to write the abstract of a thesis ? Thesis abstract is a small version of your dissertation or thesis . This small description ensures a better understanding of an entire paper, discovers the present condition of analyzed problems, distinguishes main objectives and determines existing expectations. A profound analysis of a major question is requested. Abstract needs to be less than five percent of the dissertation. Students write thesis abstracts of a proper length, get information for the summary using their own personal background information, knowledge and analyses’ fallouts.

Thesis abstract includes main analyzed objectives, compound research questions , problem statements, detailed dissertation methodology , and conclusions. Abstract needs to include source references and acronyms. It allows describing the top point of a dissertation paper providing a good understanding of the studied subjects and discovering numerous outcomes. Key theories and hypotheses are requested parts. They bring needed thesis abstract accurate form and allow saving time for this essential part flawless completion. Don't forget to check out  thesis abstract examples provided by our   professional thesis writers at the end of this article.

Writing a proper summary requires a good knowledge of an analyzed theme, valuable background information, improved writing and analytical skills. Advanced analytical skills allow performing its professional version. Key theories need to be a part of the short summary, showing main objectives of conducted analyses and research works. Proper thesis abstract format includes the following major elements:

• general background information;
• research hypotheses;
• methodology;
• conclusions;
• implications.

The beginning of abstract needs to include general information. It draws readers’ attention, allows them discovering key research work’ objectives and outcomes of conducted studies when reading a single summary. However, don't confude an abstract with an executive summary format . Checking introduction, people get main information about conducted work. It is a kind of dissertation’s professional review. Writing a thesis abstract takes time for performing and must be performed after the entire dissertation paper is complete. It is clever to write it in such a way. It saves precious time and efforts used for editing in future.

Thesis abstract has a limit of words and describes the major purpose of research works, writer’s contribution to assigned problem-solving history. Many scientists have made great discoveries in their dissertations. Today, students face the same challenges. Numerous investigations are conducted with an aim to answer main questions of dissertation paper and provide appropriate indications. The level of papers’ difficulty depends on a scientist’s personal characteristics. They mostly include research skills and general knowledge.

Three key elements of a Thesis Abstract 

Begin by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer? You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information.

After identifying the problem, state the objective of your research. Use verbs like investigate, test, analyze  or evaluate to describe exactly what you set out to do. This part of the abstract can be written in the present or past simple tense, but should never refer to the future, as the research is already complete.

After - mention the research methods that you used to answer your question. This part should be a direct description of what you did in one or two sentences. It is usually written in the past simple tense as it refers to completed actions. 

There is no need to evaluate validity or obstacles you might have encountered in this part - the goal is not to give an account of the methodology strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used. Mention whether you have used quantitative or qualitative methods . 

Next - summarize the main research results. This part of the abstract can be in the present or past simple tense. Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, provide the main conclusion in thesis : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense. If your aim was to solve a practical problem, the conclusions might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

The literature review brings additional identifications and valuable sources of information. Writing down titles and authors of used works allows readers gaining additional sources of assigned problem discoveries and reaching data for calculations. Many analyses require accurate figures and numbers. You may connect present studies with investigations described in published articles and conducted by famous researchers in past. You show your own contributions and accounts. An abstract format may be updated many times. Each popular thesis abstract includes writer’s scores greatly described at the beginning of written dissertation work.

An accurate summary shows the author’s analytical and writing skills. It contains key objectives, research justifications, detailed methodology, writing techniques, major results and study statements. Never write thesis abstracts before completing a dissertation. Table of content and paper headings may be used as guidelines to write proper thesis abstract. Letting other people read your thesis abstract before submitting is important; it gives a chance to deal with possible mistakes in minutes. Thesis abstract includes various elements. It casts light on difficult methodology and identifies what is your research problem .

Experienced writers prefer writing a dissertation abstract after the entire paper was written and the results were reached. It allows creating a professional paper’s summary. Proper scientific content is important when readers generally read dissertation’s summaries first. This is a short version of the main paper allowing readers gaining the main information and building their own expectations about dissertation outcomes. This special content needs to be flawless and original.

Thesis abstract is an essential part of every dissertation paper. It is a professional summary of a complete dissertation work presented on a few pages at the beginning of the dissertation paper. It gives readers a chance to discover the key points of the dissertation, its research chapters, calculations, source references, methodology and results part. Writing a proper abstract is essential.

Students use various popular techniques and guidelines to perform perfect thesis abstract, including numerous summaries samples available online. Proper structure of short summary is crucial. It should answer all researches’ questions and be written to identify major elements and objectives of a dissertation. Thesis abstract answers main questions of the entire paper. This short summary is a single page of text. Every thesis abstract needs to show the key methods used in a work, problems analyzed and gathered outcomes of conducted complex research work.

Researcher: [Name Surname] Presentation Title: Characterization of Iron Deposition in Recombinant Heteropolymer Ferritins Research Focus: Chemistry School: [School Name] Presentation Type: Poster Presentation Abstract: Characterization of Iron Deposition in Recombinant Heteropolymer Ferritins Deneen Cole, Dr. Fadi Bou-Abdallah, SUNY Potsdam (NY, USA), Dr. Paolo Arosio, University of Brescia (Italy), Dr. Sonia Levi, Vita-Salute San Raffaele University (Italy) Ferritin is a ubiquitous iron storage and detoxification protein found highly conserved in species from bacteria to plants to humans. In mammals, ferritin is composed of two functionally and genetically distinct subunit types, H (heavy, ~21,000 Da) and L (light, ~19,000 Da) subunits which co-assemble in various ratios with tissue specific distribution to form a shell-like protein. The H-subunit is responsible for the fast conversion of Fe(II) to Fe(III) by dioxygen (or H2O2) whereas the L-subunit is thought to contribute to the nucleation of the iron core. In the present work, we investigated the iron oxidation and deposition mechanism in two recombinant heteropolymers ferritin samples of ~20H:4L (termed H/L) and ~22L:2H (termed L/H) ratios. Data indicates that iron oxidation occurs mainly on the H-subunit with a stoichiometry of 2Fe(II):1O2, suggesting formation of H2O2. The H/L sample completely regenerates its ferroxidase activity within a short period of time suggesting rapid movement of Fe(III) from the ferroxidase center to the cavity to form the mineral core, consistent with the role of L-chain in facilitating iron turn-over at the ferroxidase center of the H-subunit. In L/H, Fe(II) oxidation and mineralization appears to occur by two simultaneous pathways at all levels of iron additions: a peroxidation pathway with a 2Fe(II)/1O2 ratio and a mineralization pathway with a 4Fe(II)/1O2 resulting in an average net stoichiometry of ~3Fe(II)/1O2. These results illustrate how recombinant heteropolymer ferritins control iron and oxygen toxicity while providing a safe reservoir for reversible uptake and release of iron for use by the cell.

Researcher: [Name Surname] Presentation Title: An Analysis of Yukon Delta Salmon Management Research Focus: Fisheries management related to Bering Sea fisheries and Yukon River salmon populations. School: [School Name] Student Level: Masters Presentation Type: Oral Presentation Abstract: The broad range of Pacific Alaskan salmon has resulted in the creation of a complex and multiorganizational system of management that includes the state of Alaska, various federal departments, a Congressionally-mandated fishery council, and a number of commercial and nongovernmental fish organizations. In the Bering Sea salmon are caught by the commercial groundfish fleet as by-catch. On the Yukon River salmon are commercially and traditionally harvested for both economic and cultural sustenance by the Yup’ik residents of the Yukon Delta. Declining salmon populations has driven scientific research which considers the effects of Bering Sea salmon by-catch. My research findings indicate that Bering Sea fisheries occur where juvenile salmon mature, directly impacting Yukon River salmon populations. Further, the research reflects that although Yukon salmon populations have plummeted, a recent effort was made to open the northern Bering Sea, which includes the Yukon River coastal shelf, to deep-sea commercial fishing. By researching the relationship of policy to cultural salmon dependence, it becomes evident that Alaskan salmon-tribes are excluded from salmon management and decision-making. Legal research reflects that three basic federal Indian concepts – inherent rights, Indian Country, and tribal right of occupancy – emerge as potential foundations that may allow Alaskan salmon tribes to begin sharing legal responsibility over salmon. Yukon River salmon are an international and anadromous species that require multi organizational management. My research reflects that current management favors the Bering Sea commercial fishing industry, despite data indicating Bering Sea fisheries impact Yukon salmon populations and an overall downward trend in Yukon salmon populations.

The methodology is an important part of your dissertation. It describes a broad philosophical underpinning to your chosen research methods, either quantitative or qualitative, to explain to readers your approach better. Make sure that you’re clear about an academic basis for your choice of research ...

When writing an academic paper on either broad or narrow research paper topics, a good research question can help you start well. It’s all about stating a clear one that your research will answer. It plays an important role because it helps you focus the entire paper and enables you to make a strong...

When you write a thesis, you should pay exceptional attention to the introduction. The reader will start your thesis from the introduction, and he will make up his view and understanding of the problem, your ideas, professionalism and writing skills based on the introduction. Your introduction is an...

• Structuring your thesis
• Information and services
• Higher Degree by Research
• HDR candidature support
• How to write a thesis

The best structure for your HDR thesis will depend on your discipline and the research you aim to communicate.

Before you begin writing your thesis, make sure you've read our advice on thesis preparation for information on the requirements you'll need to meet.

Once you've done this, you can begin to think about how to structure your thesis. To help you get started, we've outlined a basic structure below, but the requirements for your discipline may be different .

If you need help determining a suitable structure:

• read other theses in your discipline – you can search for UQ theses on the Library website. For prime examples, search for theses that received commendations from their examiners
• check with your advisor.

A basic thesis structure includes the following sections:

Introduction and literature review

Results or findings.

An abstract is a summary of your entire thesis and should provide a complete overview of the thesis, including your key results and findings.

An abstract is different to your introduction, and shouldn't be used to advertise your thesis — it should provide enough information to allow readers to understand what they'll learn by reading the thesis.

Your abstract should answer the following questions:

• What did you do?
• How did you do it?
• Why was it worth doing?
• What were the key results?
• What are the implications or significance of the results?

As your abstract will have a word limit, you may be unable to answer every question in detail. If you find yourself running out of words, make sure you include your key findings before other information.

All theses require introductions and literature reviews, but the structure and location of these can vary.

In some cases, your literature review will be incorporated into the introduction. You may also review literature in other parts of your thesis, such as in the methods section.

Other options for structuring an introduction and literature review include:

• a brief introductory chapter with a longer, separate literature review chapter
• a long introductory chapter with a brief introductory section followed by literature review sections
• a brief introductory chapter with detailed literature reviews relevant to the topic of each chapter provided separately in each chapter — this is common in a thesis comprised of publications.

If you have a separate introduction and literature review, they should complement, not repeat, each other.

The introduction should outline the background and significance of the broad area of study, as well as your:

• general aims – what you intend to contribute to the understanding of a topic
• specific objectives – which particular aspects of that topic you'll be investigating
• the rationale for proceeding in the way that you did
• your motivation or the justification for your research – the level of detail can vary depending on how much detail you will be including in a literature review.

The literature review should provide a more detailed analysis of research in the field, and present more specific aims or hypotheses for your research. What's expected for a literature review varies depending on your:

• program – a PhD thesis requires a more extensive literature review than an MPhil thesis
• discipline – analyse well-written examples from your discipline to learn the conventions for content and structure.

To get some ideas about how to structure and integrate your literature review, look at how to write a literature review and an example analysis of a literature review , or talk to your advisor.

A possible structure for your methods section is to include an introduction that provides a justification and explanation of the methodological approach you chose, followed by relevant sub-sections. Some standard sub-sections of a methods chapter include:

• Participants
• Procedures.

How the methods section is structured can depend on your discipline, so review other theses from your discipline for ideas for structure.

Regardless of structure, the methods section should explain:

• how you collected and analysed your data – you only need to include enough detail that another expert in the field could repeat what you've done (you don't have to detail field standard techniques or tests)
• why you chose to collect specific data
• how this data will help you to answer your research questions
• why you chose the approach you went with.

You may want to present your results separately to your discussion. If so, use the results section to:

• specify the data you collected and how it was were prepared for analysis
• describe the data analysis (e.g. define the type of statistical test that was applied to the data)
• describe the outcome of the analysis
• present a summary and descriptive statistics in a table or graph.

Use tables and figures effectively

Reports usually include tables, graphs and other graphics to present data and supplement the text. To learn how to design and use these elements effectively, see our guides to:

• incorporating tables, figures, statistics and equations (PDF, 1.2MB)
• graphic presentation (PDF, 2.9MB) .

Use the discussion section to:

• comment on your results and explain what they mean
• compare, contrast and relate your results back to theory or the findings of other studies
• identify and explain any unexpected results
• identify any limitations to your research and any questions that your research was unable to answer
• discuss the significance or implications of your results.

If you find that your research ends up in a different direction to what you intended, it can help to explicitly acknowledge this and explain why in this section.

Use the conclusion section to:

• emphasise that you've met your research aims
• summarise the main findings of your research
• restate the limitations of your research and make suggestions for further research.

In some cases, the discussion and conclusion sections can be combined. Check with your advisor if you want to combine these sections.

• Thesis writing tips

Learning Advisers

Our advisers can help undergraduate and postgraduate students in all programs clarify ideas from workshops, help you develop skills and give feedback on assignments.

How a Learning Adviser can help

Further support

Writing a clear and engaging research paper Thesis and dissertation writing: an examination of published advice and actual practice Scientific writing

The Plagiarism Checker Online For Your Academic Work

Start Plagiarism Check

Editing & Proofreading for Your Research Paper

Get it proofread now

Online Printing & Binding with Free Express Delivery

Configure binding now

• Academic essay overview
• The writing process
• Structuring academic essays
• Types of academic essays
• Academic writing overview
• Sentence structure
• Academic writing process
• Improving your academic writing
• Titles and headings
• APA style overview
• APA citation & referencing
• APA structure & sections
• Citation & referencing
• Structure and sections
• APA examples overview
• Commonly used citations
• Other examples
• British English vs. American English
• Chicago style overview
• Chicago citation & referencing
• Chicago structure & sections
• Chicago style examples
• Citing sources overview
• Citation format
• Citation examples
• College essay overview
• Application
• How to write a college essay
• Types of college essays
• Commonly confused words
• Definitions
• Dissertation overview
• Dissertation structure & sections
• Dissertation writing process
• Graduate school overview
• Application & admission
• Study abroad
• Master degree
• Harvard referencing overview
• Language rules overview
• Grammatical rules & structures
• Parts of speech
• Punctuation
• Methodology overview
• Analyzing data
• Experiments
• Observations
• Inductive vs. Deductive
• Qualitative vs. Quantitative
• Types of validity
• Types of reliability
• Sampling methods
• Theories & Concepts
• Types of research studies
• Types of variables
• MLA style overview
• MLA examples
• MLA citation & referencing
• MLA structure & sections
• Plagiarism overview
• Plagiarism checker
• Types of plagiarism
• Printing production overview
• Research bias overview
• Types of research bias
• Example sections
• Types of research papers
• Research process overview
• Problem statement
• Research proposal
• Research topic
• Statistics overview
• Levels of measurment
• Frequency distribution
• Measures of central tendency
• Measures of variability
• Hypothesis testing
• Parameters & test statistics
• Types of distributions
• Correlation
• Effect size
• Hypothesis testing assumptions
• Types of ANOVAs
• Types of chi-square
• Statistical data
• Statistical models
• Spelling mistakes
• Tips overview
• Academic writing tips
• Dissertation tips
• Sources tips
• Working with sources overview
• Evaluating sources
• Finding sources
• Including sources
• Types of sources

Your Step to Success

Plagiarism Check within 10min

Printing & Binding with 3D Live Preview

How To Write An Abstract

How do you like this article cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Inhaltsverzeichnis

• 1 Definition: Abstract
• 4 Abstract in Different Languages
• 5 Abstract vs. Conclusion
• 6 In a Nutshell

Definition: Abstract

An abstract is a short summary of a research paper. It is not part of the actual text and must be included at the very beginning of your work. It does not show up in the structure and the table of contents of your thesis.

You write an abstract to give a brief account of the most important information relating to the research background, structure, method, data analysis, and results of your research paper. The abstract should not create suspense: Making it very clear early on what your results are will help the reader evaluate the relevance of your paper.

What is an abstract?

An abstract is a short summary written at the beginning of a research paper . It highlights the main ideas of your academic project. Your research methods, data analysis, results plus any background information relating to your research should be included in the abstract.

Why do I need an abstract?

An abstract is nescessary, as it helps the reader to decide whether the results and methods of a particular paper are relevant to them or whether it is worthwhile for them to read the whole paper. It effectively creates the first impression of the thesis or essay. It is also very useful for fellow researchers in the academic community, as they can decide upon first glance whether or not the paper can be useful or relevant to their personal research project.

Where does the abstract belong?

The abstract is to be put at the beginning of your writing project. It should appear between the title page and the table of contents page of the research paper. If you’re writing a thesis with an acknowledgements page, then the abstract is placed after the acknowledgements.

When do I write the abstract?

The abstract should be the very last thing you write during the academic writing process. This is because it is only possible to come up with a precise summary of your work once you have written the whole research paper . Using this same logic, the conclusion should also be one of the very last paragraphs that you write.

How long should an abstract be?

The abstract should be between one third of a page and one full page in length. However, this depends on the length of the paper that you’re writing. For a smaller research paper, 100 words is sufficient. For a bachelor’s thesis, or a master’s thesis, the abstract should be between 1 or 2 pages. But it should definitely not exceed 2 pages!

Tip: Take a look at some abstract examples for inspiration!

What is included in an abstract?

A top-quality abstract will include a brief explanation of the following aspects:

1. Background and purpose 2. Overarching research question 3. Gap in literature and methods used to address the gap in literature 4. Main results of the writing project 5. Interpretation or conclusion of the thesis statement Each of these points should be addressed in only a few sentences.

Is an abstract international?

It doesn’t matter which language you write your abstract in, an English translation of your abstract is often required. The reason for this is so that the results of your research paper can be reviewed by an international audience.

Also useful: What is plagiarism?

How to Write an Abstract: The Content

There is one thing you must understand about how to write an abstract:

The abstract should contain important aspects of the paper, like the

• research question ,
• limitations,
• study design,
• main results,
• main idea or message,
• key interpretations,
• implications,
• and validity (cf. Schnur 2005, as quoted in Theisen 2013: 101).

How to Write an Abstract: Structure

The abstract follows the same structure as your paper:

(cf. Kruse 2007: 186)

How to Write an Abstract: Goal

“An abstract is a very precise summary of your whole paper”

You might have heard the term ‘summary’ referring to an abstract of a research paper (cf. Oertner, St. John, & Thelen 2014: 93). However, do not make the mistake of assuming that an abstract is something rather general. You would be on the wrong track. When asked to write an abstract for your bachelor’s or master’s thesis, you are expected to deliver a very precise summary of your whole paper.

An abstract’s right to exist is founded in its purpose of helping a potential reader to quickly find out if it is worthwhile to read the whole paper (cf. Rossig & Prätsch 2005: 89). For this reason, an abstract has to offer everything the reader needs in order to evaluate the relevance of a research paper for their own work. It is the ultimate way of advertising your research.

You can save yourself a lot of work and trouble if you concentrate on reading the abstracts of published papers first; most papers these days provide abstracts (cf. Oertner, St. John, & Thelen 2014: 80). If you take your time to thoroughly read the abstracts, you will be able to judge whether a particular article will help you to support your line of argumentation. If not, then just move on the next article. You can check out the sample abstracts in this blog entry to get a better idea of how to write an abstract and what an abstract looks like.

“Through reading an abstract, you can find out if a paper arouses your interest or is relevant for your studies.”

How to Write an Abstract: Length 

An abstract is a summary of a publication or an article on one third of a DIN-A4 page (cf. Kruse 2007: 185). Stickel-Wolf & Wolf provide a rough guideline for the word count: They say that an abstract should not contain more than 100 words (cf. 2013: 249).

Note: Generally speaking, an abstract for a bachelor’s or master’s thesis should not exceed one page, and the absolute maximum is two pages (cf. Rossig & Prätsch 2005: 89). The reason for this is self-explanatory: The purpose of the abstract is to offer a quick overview of, for example, a 60- or 80-page paper.

Abstract Example 1: English abstract addressing the main points of your paper

Abstract Example 2: English abstract of a master’s thesis with keywords

Recommended: Harvard Referencing

When to Write the Abstract and Where to Put It

You are probably wondering where the abstract should be placed in your research paper: at the beginning or towards the end? It is common to include the abstract right at the beginning (cf. Rossig & Prätsch 2005: 89; Samac, Prenner, & Schwetz 2009: 56). As we have established, it is a helpful tool for the reader to get an overview of the whole paper as early as possible. It is good to know what will follow. So, it would not be logical to put it at the end, right? Stickel-Wolf and Wolf recommend embedding the abstract in between the title page and the table of contents (cf. 2013: 249).

The next question about ‘How to write an abstract’ is a bit trickier. When is the right time to write the abstract? Given that it is to be added at the very beginning, before the actual text, you might think it is the first thing you are supposed to write. However, you will not be able to write a clear-cut and precise summary at a stage when you do not even know what you are summarizing. Therefore, you can only write the abstract after you have written the whole paper. How else would you know enough about your results to give a complete record of your whole work (cf. Rossig & Prätsch 2005: 89)?

Note: You can draw essential information to write your abstract from your conclusion, as this part briefly repeats the research questions and provides an evaluative summary of the results (cf. Stickel-Wolf 2013: 249).

Abstract in Different Languages

The question of how to write an abstract is popular not just in an English-speaking context.

It increasingly concerns international students as well. Nowadays, it is becoming more and more important to write the whole paper in English, rather than in the native language of the country a student studies in. Indeed, many papers are still written in the native language of the country.

But your research paper not being written in English does not mean that this also holds true for the abstract. Often, the student needs to write an abstract in not only German, Spanish, or French (depending on the country you study in) but also English.

An English abstract (in addition to, say, a German abstract) is necessary to ensure that a research paper will be accessible to an international market.

Sometimes, only an English abstract is required. Also, as Samac, Prenner, and Schwetz point out, an English translation of the German text (if your thesis is in German) must be provided on the very same page to meet international standards (2009: 56).

Example of an abstract in German and English

Note: Academic English is quite a bit different from academic German, Spanish, and other languages. We recommend that you read research papers in English to get a feel for the differences in style and structure (cf. Karmasin & Ribing 2014: 45).

Abstract vs. Conclusion

Caution: The abstract is NEVER a conclusion of your research paper and it differs from the conclusion in many aspects. Make sure to read the sample abstracts provided on this page to get a good grasp on the major differences between the abstract and the conclusion.

Assignment Printing & Binding

You are already done writing your assignment and need a high quality printing & binding service? Then you are right to choose BachelorPrint! Check out our 24-hour online printing service. For more information click the button below :

In a Nutshell

• An abstract is a short summary of a research paper. It is embedded between the title page and the table of contents , and appears before the actual text.
• The abstract should not exceed one page (at the most, two pages). Ideally, it should fit on a single page.
• An abstract is a brief account of your paper. It provides information about the structure, argumentation, method, and results of your research paper (cf. Oertner, St. John, & Thelen 2014: 93).
• The aim of writing an abstract is to make it possible for the reader to quickly evaluate the relevance of your work without having to read much. Also, reading abstracts makes your life easier when you are doing research. You can decide which paper is worth reading and which one is not, just based on the abstract.
• There is a clear difference between the abstract and the conclusion. The abstract is shorter, can be read independently of the text, and does not contain evaluations of the author which are not already part of the text (cf. Kruse 2007: 186).
• Writing an English abstract or providing an English translation of your abstract is becoming increasingly important and popular. In this way, your research can be made internationally accessible.

Works cited

Karmasin, Matthias, & Rainer Ribing. 2014. Die Gestaltung wissenschaftlicher Arbeiten . 8th Edition. Vienna: Facultas.

Kruse, Otto. 2007. Keine Angst vor dem leeren Blatt – Ohne Schreibblockaden durchs Studium . 12th Edition. Frankfurt: Campus.

Oertner, Monika, Illona St. John, & Gabriele Thelen. 2014. Wissenschaftlich Schreiben – Ein Praxisbuch für Schreibtrainer und Studierende. Paderborn: Wilhelm Fink.

Rossig, Wolfram E., & Joachim Prätsch. 2005. Wissenschaftliche Arbeiten . 5th Edition. Weyhe: PRINT-TEC.

Samac, Klaus, Monika Prenner, & Herbert Schwetz. 2009. Die Bachelorarbeit an Universität und Fachhochschule. Vienna: Facultas.

Stickel-Wolf, Christine, & Joachim Wolf. 2013. Wissenschaftliches Arbeiten und Lerntechniken – Erfolgreich studieren – gewusst wie! 7th Edition. Wiesbaden: Springer Gabler.

Theisen, Manuel René. 2013. Wissenschaftliches Arbeiten – Erfolgreich bei Bachelor- und Masterarbeit . Munich: Franz Vahlen.

We use cookies on our website. Some of them are essential, while others help us to improve this website and your experience.

• External Media

Individual Privacy Preferences

Cookie Details Privacy Policy Imprint

Here you will find an overview of all cookies used. You can give your consent to whole categories or display further information and select certain cookies.

Accept all Save

Essential cookies enable basic functions and are necessary for the proper function of the website.

Show Cookie Information Hide Cookie Information

Statistics cookies collect information anonymously. This information helps us to understand how our visitors use our website.

Content from video platforms and social media platforms is blocked by default. If External Media cookies are accepted, access to those contents no longer requires manual consent.

Privacy Policy Imprint

How to write a PhD thesis: a step-by-step guide

A draft isn’t a perfect, finished product; it is your opportunity to start getting words down on paper, writes Kelly Louise Preece

Kelly Louise Preece

• More on this topic

Created in partnership with

You may also like

Popular resources

.css-1txxx8u{overflow:hidden;max-height:81px;text-indent:0px;} How to develop a researcher mindset as a PhD student

Formative, summative or diagnostic assessment a guide, emotions and learning: what role do emotions play in how and why students learn, how to assess and enhance students’ ai literacy, how hard can it be testing ai detection tools.

Congratulations; you’ve finished your research! Time to write your PhD thesis. This resource will take you through an eight-step plan for drafting your chapters and your thesis as a whole. 

Organise your material

Before you start, it’s important to get organised. Take a step back and look at the data you have, then reorganise your research. Which parts of it are central to your thesis and which bits need putting to one side? Label and organise everything using logical folders – make it easy for yourself! Academic and blogger Pat Thomson calls this  “Clean up to get clearer” . Thomson suggests these questions to ask yourself before you start writing:

• What data do you have? You might find it useful to write out a list of types of data (your supervisor will find this list useful too.) This list is also an audit document that can go in your thesis. Do you have any for the “cutting room floor”? Take a deep breath and put it in a separate non-thesis file. You can easily retrieve it if it turns out you need it.
• What do you have already written? What chunks of material have you written so far that could form the basis of pieces of the thesis text? They will most likely need to be revised but they are useful starting points. Do you have any holding text? That is material you already know has to be rewritten but contains information that will be the basis of a new piece of text.
• What have you read and what do you still need to read? Are there new texts that you need to consult now after your analysis? What readings can you now put to one side, knowing that they aren’t useful for this thesis – although they might be useful at another time?
• What goes with what? Can you create chunks or themes of materials that are going to form the basis of some chunks of your text, perhaps even chapters?

Once you have assessed and sorted what you have collected and generated you will be in much better shape to approach the big task of composing the dissertation. 

Decide on a key message

A key message is a summary of new information communicated in your thesis. You should have started to map this out already in the section on argument and contribution – an overarching argument with building blocks that you will flesh out in individual chapters.

You have already mapped your argument visually, now you need to begin writing it in prose. Following another of Pat Thomson’s exercises, write a “tiny text” thesis abstract. This doesn’t have to be elegant, or indeed the finished product, but it will help you articulate the argument you want your thesis to make. You create a tiny text using a five-paragraph structure:

• The first sentence addresses the broad context. This locates the study in a policy, practice or research field.
• The second sentence establishes a problem related to the broad context you have set out. It often starts with “But”, “Yet” or “However”.
• The third sentence says what specific research has been done. This often starts with “This research” or “I report…”
• The fourth sentence reports the results. Don’t try to be too tricky here, just start with something like: “This study shows,” or “Analysis of the data suggests that…”
• The fifth and final sentence addresses the “So What?” question and makes clear the claim to contribution.

Here’s an example that Thomson provides:

Secondary school arts are in trouble, as the fall in enrolments in arts subjects dramatically attests. However, there is patchy evidence about the benefits of studying arts subjects at school and this makes it hard to argue why the drop in arts enrolments matters. This thesis reports on research which attempts to provide some answers to this problem – a longitudinal study which followed two groups of senior secondary students, one group enrolled in arts subjects and the other not, for three years. The results of the study demonstrate the benefits of young people’s engagement in arts activities, both in and out of school, as well as the connections between the two. The study not only adds to what is known about the benefits of both formal and informal arts education but also provides robust evidence for policymakers and practitioners arguing for the benefits of the arts. You can  find out more about tiny texts and thesis abstracts on Thomson’s blog.

• Writing tips for higher education professionals
• Resource collection on academic writing
• What is your academic writing temperament?

Write a plan

You might not be a planner when it comes to writing. You might prefer to sit, type and think through ideas as you go. That’s OK. Everybody works differently. But one of the benefits of planning your writing is that your plan can help you when you get stuck. It can help with writer’s block (more on this shortly!) but also maintain clarity of intention and purpose in your writing.

You can do this by creating a  thesis skeleton or storyboard , planning the order of your chapters, thinking of potential titles (which may change at a later stage), noting down what each chapter/section will cover and considering how many words you will dedicate to each chapter (make sure the total doesn’t exceed the maximum word limit allowed).

Use your plan to help prompt your writing when you get stuck and to develop clarity in your writing.

Some starting points include:

• This chapter will argue that…
• This section illustrates that…
• This paragraph provides evidence that…

Of course, we wish it werethat easy. But you need to approach your first draft as exactly that: a draft. It isn’t a perfect, finished product; it is your opportunity to start getting words down on paper. Start with whichever chapter you feel you want to write first; you don’t necessarily have to write the introduction first. Depending on your research, you may find it easier to begin with your empirical/data chapters.

Vitae advocates for the “three draft approach” to help with this and to stop you from focusing on finding exactly the right word or transition as part of your first draft.

This resource originally appeared on Researcher Development .

Kelly Louse Preece is head of educator development at the University of Exeter.

If you would like advice and insight from academics and university staff delivered direct to your inbox each week, sign up for the Campus newsletter .

How to develop a researcher mindset as a PhD student

A diy guide to starting your own journal, contextual learning: linking learning to the real world, what does a university faculty senate do, hybrid learning through podcasts: a practical approach, how exactly does research get funded.

Register for free

and unlock a host of features on the THE site

• How it works
• Pay for essays
• Do my homework
• Term Paper Writing Service
• Do my assignment
• Coursework help
• Our Writers

How to Write an Abstract for a Research Paper

A professional writer with ten years of experience and a Ph.D. in Modern History, Catharine Tawil writes engaging and insightful papers for academic exchange. With deep insight into the impact of historical events on the present, she provides a unique perspective in giving students a feel for the past. Her writing educates and stimulates critical thinking, making her a treasure to those wading through the complexities of history.

Do you want to know how to write an abstract like a pro? Composing an abstract for a research paper is a very important stage of your research work. It is a compact and precise description of the main body of your paper, which is intended to help the readers understand the paper quickly. An abstract should be concise, well-organized, and contain all the important issues of your research paper. It enables readers to filter out and choose the rest of the document according to their interests. So, let us explain the details.

What Is an Abstract for a Research Paper?

An abstract is a short, concise summary of a research paper that provides a clear understanding of the paper. It is placed at the beginning of the paper and ranges from 150 to 300 words. It gives a synopsis of the major findings of your study, comprising the research aim, methods used, the most important findings, and the main conclusions.

The abstract gives readers a brief understanding of your paper, and they do not need to read the entire document. It is a complete text that shows why your work is important and summarizes your study's main findings. The quality of the abstract is important because it allows your paper to be picked out in academic databases and, thus, other researchers to read your full paper.

When to Write an Abstract

You should write the abstract and the remaining paper after you have completed your research. This is because the summary is essentially a collation of all the key points of your research, such as the results and conclusions, which are not known until you have conducted the research. An abstract should be written at the end to ensure that it adequately reflects your paper and that no important points are missed.

According to the University of Southern California, your abstract should reflect your research, be clear and concise, and show the main goal of your study and its outcome. Through the final stage of your writing cycle, you can be confident that your abstract has covered all aspects of your article and is consistent with its content.

Types of Abstract

Abstracts can be generally divided into two types, each distinct by purpose. Recognizing the gap in these categories from a researcher's perspective enables the design of an abstract that fits the study's aim and the reader's anticipations. Here is what you need to know about the main abstract types as a student.

Descriptive Abstract

Such an abstract introduces the research's information without giving a detailed account. It explains what the methods and the scope of the research are but won't include the results and conclusions. A descriptive abstract, which is usually very short, less than 100 words, and is often used for short papers or articles, is commonly used for brief papers or articles. Here is its purpose:

• Provides the research's purpose and scope.
• Highlights the methods used.
• Does not include results or conclusions.

Following a descriptive abstract, the reader should have a decent comprehension of the research's purpose and a general idea of the topics covered. However, they should read the full paper to discover the findings and conclusions. It's often not used as much as its informative counterpart, but it can be useful for complex studies that don't require a detailed explanation in the abstract.

Informative Abstract

An informative abstract is a mini-version of the paper. It is a synopsis. It contains not only the study goals and research methods but also the results and conclusions. This type of abstract is more detailed and longer than a descriptive abstract, often going up to 200 to 300 words. The author presents an outline of the study's findings or proofs, the thesis or main arguments, and a brief argument of the implications. Besides, you can always say, "Write my paper." Do not hesitate to ask us for help!

An informative abstract provides enough detail about the content to help the reader decide whether to read the whole paper. We mostly use this type, which is especially convenient for technical or research-intensive documents where the reader does not necessarily need to read the whole paper to get the idea.

Descriptive & Informative Abstracts: Common Differences

The structure of the abstract: step-by-step instructions.

A well-organized abstract provides a concise and summarized overview of your research paper. Each component should be correctly written to provide the key points of your research. The structure typically follows the natural order of the research flow to present the motivation, problem, methods, results, and conclusion in an integrated and consistent manner.

Purpose and Motivation

In your abstract's introduction and purpose section, you explain why you commenced the research and your goals. This part should clearly and unambiguously explain the fact that the research question is crucial and justify the rationale for the study. It should start with giving the context by discussing the wider research field or a particular issue that is the focus of your paper.

The Problem of Research

The purpose statement of the abstract defines the specific problem or gap in understanding your research studies. To be effective, you have to be concise but make sure your message gets the idea across and is clear enough to convey the problem or question you are handling. Here is what you should do:

• Clearly state the research problem.
• Identify the gap in the literature.
• Mention the implications of the problem.

After explaining the problem, you should identify the benefit of solving it for your discipline or the intended group. This defines the importance of your research and shows how your work relates to the ongoing academic debate in the field. By thoroughly identifying the problem, you help your readers comprehend the context and magnitude of the problem being investigated. So, check our research paper abstract guidelines to master your writing.

Researching Approach

The methodology section of your abstract elaborates on the techniques you applied to resolve the research question. A description of the research design, data collection techniques, and analysis methods should be carried out. It is important to summarize why these methods are appropriate for your analysis and how, by using them, you can accomplish your research goals.

Research Results

In the research results section of your abstract, highlight the main conclusions of your investigation. This section is supposed to be straight and concise, indicating major results without getting into an in-depth discussion of the analysis. State whether the results confirm or disprove your hypothesis or answer the research question.

Highlight any commonly occurring trends, relationships, or patterns you have discovered are a must. However, including concrete numbers to clarify the results and impact is important. This brief part should help the reader understand what your research unveiled and how these findings boost the scientific community. Besides, check our latest article on how to polish your reasearch paper format!

The final part of your abstract should stress the practical implications and importance of the findings. The second section of the report summarizes the research findings and describes the broader significance of the results obtained. Outline the study you intend to address, the gap you found in the research question, and what it means for the field. Besides, you need a research paper abstract example.

Tips for Writing an Abstract

A well-written abstract is imperative to stimulate interest in your research and explain it lucidly to readers. It will be your paper's window; it provides the reader with all the necessary information in an easy-to-understand way. Below are some simple tricks to guide you through writing a short abstract that will convey your research and be interesting to read.

Read Other Abstracts

Do you know all the components of a research paper abstract? If not, remember them ASAP! There's nothing wrong with reading abstracts written by other students. Think of it as an opportunity to analyze their thinking processes and approaches to crafting this section of the research paper. Here's what you should pay attention to:

• Observe the language and terminology used.
• Note the balance between conciseness and detail.
• Identify common structures that seem effective.

After familiarizing yourself with each abstract example, write as clearly and concisely as possible. This will help you understand the abstract's nature and how to organize the information.

Reverse Outline

Here is how to craft a research paper abstract like a pro. Try reverse outlining. This technique involves outlining your completed paper and noting the key points from each section: introduction, methods, results, and conclusion. This makes it easier to detect if anything is missing from your abstract and if the content of your abstract accurately reflects the content of your paper.

Cech research paper abstract examples. Begin with the main goal and what you'll be studying, then continue with the methodology, the main findings, and the importance of these findings. The paper is broken down into essential sections so that you can rebuild them into a concise and informative abstract.

Write Clearly and Concisely

Clarity and shortness are vital when writing an abstract. It is the opener, the only part readers will read, so it must briefly tell your research story. Use simple sentences and don't use complex sentence structures to make reading easy for people, especially those outside of English-speaking countries.

Every sentence must accomplish a task, be it articulating the study, summarizing the methods, exhibiting the results, or discussing implications. Avoid telling details and concentrate on what is only important to study your research's range, importance, and consequences. This rigid but essential writing technique will make the abstract for research paper assignments clean and informative.

Check Your Formatting

Writing an abstract for a research paper may seem daunting. Finalizing correctly and adhering to your professor's key instructions is crucial. Ensure that you follow all formatting guidelines and avoid making any careless mistakes. Here's a typical checklist for students:

• Confirm word count limits.
• Check for specific structural requirements.
• Verify if certain sections require bolding or subheadings.

Before submission, cross-check your abstract for consistency in style, like font and spacing, and make sure it meets all submission requirements. Proper formatting not only gives an excellent impression but also makes your work fit into the expected norms of your audience. And check at least one abstract example beforehand!

Things to Avoid in Your Abstract

The abstract is where you need to be as clear and to the point as possible. Do not bother adding unnecessary information or intricate details that will be included in the main body of the paper. So, here is how to write an abstract for a research paper without making mistakes.

Using Jargon

So, research paper abstract writing is not an easy task. Inserting jargon and super technical vocabulary in your abstract will prevent you from reaching readers who are not specialists in your specific area of research. Abstractions should be understandable to a wider audience, including laypersons who may not be literate. Clarify the meaning of the words that are not commonly known and replace the complicated words with those that are easier to understand whenever necessary.

Just check one abstract example! If ambiguous terminology should be avoided, define it as shortly and precisely as possible. Recollect that the main role of an abstract is to convey the main idea of the research briefly and understandably; wordiness can be an obstacle in this way and prevent readers from understanding the significance of your work.

Providing Too Much Detail

When writing an abstract, you should not lose sight of the fact that it is not the main body of the paper but introduces the research. As a summary, the abstract should state the main points and findings without being so detailed as to list all the data or the analysis. The main purpose of the abstract is to give the reader a brief and clear overview of your research and its main points.

Therefore, the abstract should not contain details that confuse readers and prevent them from understanding what you are trying to say. Your research paper abstract structure should be solid. Emphasize concisely addressing the research question, design, key findings, and conclusion. The way of writing this proposal is intended to help the reader keep their interest and motivate them to read the paper.

Introducing New Concepts

Writing an abstract is not an easy task. Here's another red flag you should avoid: introducing new concepts that may not yield the desired results or align with the typical approach to creating research papers. Here is your list of actions as a student:

• Avoid mentioning studies or data not discussed in the paper.
• Do not introduce new frameworks or theories.
• Refrain from including references to literature not cited in the main body.

Ensuring the abstract contains details from the paper will keep it coherent and prevent confusing readers. An abstract summarizes your research, highlighting the major points and providing short and precise information about the research. Now, you know how to write an abstract for a research paper correctly.

Vague or Ambiguous Language

Do you need tips for writing a research paper abstract? Here you go. Being imprecise or ambiguous in an abstract can cause your research to be misinterpreted regarding its relevance and focus. It is significant to utilize accurate and understandable language to specifically convey your research's purpose, methodology, results, and implications. It is advisable not to use general statements that do not provide concrete information.

So, what is an abstract? It is a part of your paper where every sentence should effectively show the importance of your research. Having a clear and concise abstract not only improves readability but also ensures that the audience understands the aim and conclusion of your study without confusion.

Making Unsupported Claims

The argument or claim in an abstract should be supported by evidence presented in the abstract research paper. The lack of evidence backing unsupported claims may lead to the credibility loss of your research and the creation of false perceptions about its validity. It is essential to ensure that all the major paragraphs of the abstract are based on the data you obtained and the findings of your study.

This includes corroborating the results and only drawing conclusions related to them. Don't stretch the implications of your research or suggest a broader application unbacked by evidence. A trustworthy research paper abstract summarizes the research and its outcomes and is integral to the whole assignment and the research process.

Exceeding the Recommended Word Count

So, what is an abstract in a research paper? It is a crucial paper assignment! Sticking to the recommended word count for an abstract is significant. On the other hand, if the text is beyond this limit, it may be overly detailed and too much for your reader to handle. Also, being accepted for print or at conferences can be problematic since most of them have set word count requirements.

Writing an effective research paper abstract can be a game changer. A boxed summary compresses your research into its most important aspects, focusing on the problem, methodology, results, and implications without unnecessary details. Limiting the number of words ensures that your abstract remains clear and concise.

What should be included in a research paper abstract?

The research paper abstract should include a short introduction, the main research question, the methodology applied, the main findings, and finally, the concluding remarks.

How long should a research paper abstract take?

In most cases, a research paper abstract should be 150 words or more and up to 300 words.

What is the difference between a descriptive and informative abstract?

A descriptive abstract describes the paper's topic, providing only general information. On the contrary, an informative abstract describes the research topic in detail, including the purpose, methodology, and other aspects.

How can I make my abstract stand out to readers?

Your abstract should be clear, concise, and direct, focusing on the importance and uniqueness of your research.

Related posts

How to Write an Exemplification Essay | A Guide from WritePaperFor.Me

Marketing topics to write about: key ideas to take advantage of

How to Write a Thesis - Thesis Structure 2024. Basics and Tips

What are you waiting for?

You are a couple of clicks away from tranquility at an affordable price!