thesis design ab

Reference management. Clean and simple.

How to structure a thesis

A typical thesis structure

1. abstract, 2. introduction, 3. literature review, 6. discussion, 7. conclusion, 8. reference list, frequently asked questions about structuring a thesis, related articles.

Starting a thesis can be daunting. There are so many questions in the beginning:

• How do you actually start your thesis?
• How do you structure it?
• What information should the individual chapters contain?

Each educational program has different demands on your thesis structure, which is why asking directly for the requirements of your program should be a first step. However, there is not much flexibility when it comes to structuring your thesis.

Abstract : a brief overview of your entire thesis.

Literature review : an evaluation of previous research on your topic that includes a discussion of gaps in the research and how your work may fill them.

Methods : outlines the methodology that you are using in your research.

Thesis : a large paper, or multi-chapter work, based on a topic relating to your field of study.

The abstract is the overview of your thesis and generally very short. This section should highlight the main contents of your thesis “at a glance” so that someone who is curious about your work can get the gist quickly. Take a look at our guide on how to write an abstract for more info.

Tip: Consider writing your abstract last, after you’ve written everything else.

The introduction to your thesis gives an overview of its basics or main points. It should answer the following questions:

• Why is the topic being studied?
• How is the topic being studied?
• What is being studied?

In answering the first question, you should know what your personal interest in this topic is and why it is relevant. Why does it matter?

To answer the "how", you should briefly explain how you are going to reach your research goal. Some prefer to answer that question in the methods chapter, but you can give a quick overview here.

And finally, you should explain "what" you are studying. You can also give background information here.

You should rewrite the introduction one last time when the writing is done to make sure it connects with your conclusion. Learn more about how to write a good thesis introduction in our thesis introduction guide .

A literature review is often part of the introduction, but it can be a separate section. It is an evaluation of previous research on the topic showing that there are gaps that your research will attempt to fill. A few tips for your literature review:

• Use a wide array of sources
• Show both sides of the coin
• Make sure to cover the classics in your field
• Present everything in a clear and structured manner

For more insights on lit reviews, take a look at our guide on how to write a literature review .

The methodology chapter outlines which methods you choose to gather data, how the data is analyzed and justifies why you chose that methodology . It shows how your choice of design and research methods is suited to answering your research question.

Make sure to also explain what the pitfalls of your approach are and how you have tried to mitigate them. Discussing where your study might come up short can give you more credibility, since it shows the reader that you are aware of its limitations.

Tip: Use graphs and tables, where appropriate, to visualize your results.

The results chapter outlines what you found out in relation to your research questions or hypotheses. It generally contains the facts of your research and does not include a lot of analysis, because that happens mostly in the discussion chapter.

Clearly visualize your results, using tables and graphs, especially when summarizing, and be consistent in your way of reporting. This means sticking to one format to help the reader evaluate and compare the data.

The discussion chapter includes your own analysis and interpretation of the data you gathered , comments on your results and explains what they mean. This is your opportunity to show that you have understood your findings and their significance.

Point out the limitations of your study, provide explanations for unexpected results, and note any questions that remain unanswered.

This is probably your most important chapter. This is where you highlight that your research objectives have been achieved. You can also reiterate any limitations to your study and make suggestions for future research.

Remember to check if you have really answered all your research questions and hypotheses in this chapter. Your thesis should be tied up nicely in the conclusion and show clearly what you did, what results you got, and what you learned. Discover how to write a good conclusion in our thesis conclusion guide .

At the end of your thesis, you’ll have to compile a list of references for everything you’ve cited above. Ideally, you should keep track of everything from the beginning. Otherwise, this could be a mammoth and pretty laborious task to do.

Consider using a reference manager like Paperpile to format and organize your citations. Paperpile allows you to organize and save your citations for later use and cite them in thousands of citation styles directly in Google Docs, Microsoft Word, or LaTeX:

🔲 Introduction

🔲 Literature review

🔲 Discussion

🔲 Conclusion

🔲 Reference list

The basic elements of a thesis are: Abstract, Introduction, Literature Review, Methods, Results, Discussion, Conclusion, and Reference List.

It's recommended to start a thesis by writing the literature review first. This way you learn more about the sources, before jumping to the discussion or any other element.

It's recommended to write the abstract of a thesis last, once everything else is done. This way you will be able to provide a complete overview of your work.

Usually, the discussion is the longest part of a thesis. In this part you are supposed to point out the limitations of your study, provide explanations for unexpected results, and note any questions that remain unanswered.

The order of the basic elements of a thesis are: 1. Abstract, 2. Introduction, 3. Literature Review, 4. Methods, 5. Results, 6. Discussion, 7. Conclusion, and 8. Reference List.

How to write the perfect design dissertation

Tutors and students from top design colleges share their advice.

Studying design is about crafting a great design portfolio that will wow potential employers, right? Well, yes. But don't discount the importance of astute creative thinking, and expressing yourself eloquently through the written word. In short, your design dissertation matters.

"I don't believe that design students should be focused entirely on portfolio work," argues Myrna MacLeod , programme leader for Graphic Design at Edinburgh Napier University. "They should also be able to demonstrate an interest in the contexts that underpin their work, and the histories and connections that have informed our practice."

• 5 top tips for graduate designers

"Think of a dissertation as an opportunity, not a burden," urges Craig Burston , Graphic and Media Design course leader at London College of Communication (LCC). "It gives us visually-minded people an opportunity to demonstrate that we too can construct arguments and distil complex notions." 

As Burston points out, this is not just an academic exercise: the power of persuasion is often key to success as a commercial designer. "Clients seek clarity, and project concepts or proposals need to be put into context," he says.

Read on to discover some top tips from leading tutors and their students for nailing your design dissertation…

01. Treat it like a design brief

"A great dissertation should be a designed artefact, and portfolio-worthy in its own right," says Burston. And like a design brief, it should be about solving a problem: "Make sure it has clearly stated aims, strong focus, and doesn't lack opinion or rhetoric," he adds.

• Best laptops for graphic design

"The value of a designed dissertation as a portfolio piece is that it's a holistic view of the individual," agrees Sarah James , senior lecturer in Visual Communication at Arts University Bournemouth (AUB). 

"It shows, type, editorial, research and aesthetic skill, as well as the personal interests and convictions of the individual."

James identifies AUB student Maarit Koobas , who investigated responsive type in both her dissertation and final project, as a particularly strong example of this. "Her design version was one of the most authentic, restrained and elegantly expressive I have ever received," she enthuses.

Koobas conducted a huge amount of initial research into both the contexts in which responsive type can be seen – such as advertising, product design, science and material cultures – and the theories behind its analysis, including semiotics, philosophy and politics. "Creating and analysing ideas, before they end up in your portfolio, is what design is all about," argues Koobas.

• 5 must-read books for design students

02. Write about your passion

"To develop essay questions, AUB students are asked to consider what they love, hate or are puzzled by in their practice – essentially, what moves them," says James. 

"A poor dissertation is inauthentically chosen for ease as opposed to interest," she adds. "It rambles and blusters, using complex language to mask insufficient research." 

"You can tell a mile off when the writer isn't interested," agrees Burston. "How can you expect the reader to care about it if you don't? Write about something that reflects your interests, focus and direction. I've read fascinating dissertations on topics as diverse as patterns in nature, and Brutalist car parks. Make me interested in what interests you."

For Edinburgh Napier graduate Fiona Winchester , this topic turned out to be typography in graphic novels. "I love reading them, but I think people still don't take them seriously as an art form, which is a shame," she says. For her dissertation, she conducted qualitative interviews using modified pages with and without imagery (shown above). 

Her advice is simple: "Narrow down your idea to be as precise as possible. The smaller your question, the easier it is to research and try to answer it."

If you're struggling to get the ball rolling on the actual writing process, Winchester advocates starting with whichever bit you have ideas for. "If you're stuck, it's so much easier to write in whatever order it comes to you, and then edit it into a dissertation, than to try write straight through from beginning to end," she insists.

03. Don't be afraid to talk to people

"I always think my students get the most out of the new streams of knowledge they find from talking to people," says McLeod. "It breaks down barriers and allows them to find answers to problems. Hopefully they will adopt that approach when designing for people also."

In some cases, this can involve interviewing your design heroes. "Students are very surprised when they send a question to Stefan Sagmeister , Milton Glaser or Michael Wolff and they reply with the most precious nugget of knowledge," smiles McLeod. 

But remember: it's your dissertation, so don't get lazy and expect your interview subject to do all the heavy lifting.

In other cases, it could be as simple as asking friends or family to help proofread. "It is quite daunting writing such a large body of text," admits Kaori Toh , a recent graduate from Central Saint Martins, whose dissertation explored the politics of design and technology.

"I often felt I'd get lost in all that text and research," she confesses. "Therefore, I would often send my drafts to a couple of friends to have them look through, and keep my writing cohesive."

04. Reflect on your design practice 

Most of all, dissertations are an opportunity to reflect on, and develop, your creative process as a designer. "Ultimately, it's your job to make your work relevant and credible, and the dissertation helps you learn how to do this," adds Burston. 

Of course, writing doesn't always come easily to visually minded people – and Burston highlights the fact that dyslexia is not uncommon amongst designers. 

"You're not on your own – in our profession, quite the opposite in fact – so do seek academic support, and just enjoy thinking and writing about 'stuff' that informs your practice," is his advice.

One of Burston's stand-out students from this year, Tom Baber , welcomed support from the university to help with his dyslexia. Baber's dissertation focused on type design, and particularly the extent to which the longwinded design process is worth the effort, compared to using an existing typeface.

"I saw it as an opportunity to approach other type designers and see what they thought. Turns out I'm not the first to ask the question," he smiles. "Writing my dissertation helped me change from a 'maker' mentality to a 'designer' mentality, and be more critical of my ideas."

Related articles:

• 15 things they didn't teach you at design school
• The skills every design graduate needs
• 5 alternative routes into design education

Thank you for reading 5 articles this month* Join now for unlimited access

Enjoy your first month for just £1 / $1 / €1

*Read 5 free articles per month without a subscription

Join now for unlimited access

Try first month for just £1 / $1 / €1

Get the Creative Bloq Newsletter

Daily design news, reviews, how-tos and more, as picked by the editors.

Nick is a content strategist and copywriter. He has worked with world-class agencies including Superunion, Wolff Olins and Vault49 on brand storytelling, tone of voice and verbal strategy for global brands such as Virgin, Pepsi and TikTok. Nick launched the Brand Impact Awards in 2013 while editor of Computer Arts, and remains chair of judges. He's written for Creative Bloq on design and branding matters since the site's launch.

Related articles

• 2 Samsung Galaxy Tab S9 Ultra review: big Android tablet really can do it all
• 3 The definitive best adverts of all time list, as chosen by experts
• 4 This is one of the simplest but most dazzling optical illusions I've seen
• 5 This $264 Switch OLED deal is still live - but there’s a small catch
• 2 XPPEN Artist Pro 14 (Gen 2) review: fantastic tablet for most artists
• 3 4 mind-blowing Disney animation secrets
• 4 Never forget these terrible X-Men posters existed
• 5 The definitive best adverts of all time list, as chosen by experts

Handbook home

• Search the Handbook
• Undergraduate courses
• Graduate courses
• Research courses
• Undergraduate subjects
• Graduate subjects
• Research subjects
• Breadth Tracks
• CAPS Login - Staff only
• Design Thesis

Design Thesis (ABPL90169)

Graduate coursework Points: 25 Dual-Delivery (Parkville)

View full page

About this subject

• Eligibility and requirements
• Dates and times
• Further information
• Timetable (opens in new window)

Contact information

Semester 1 (early-start).

Subject Coordinators

Janet McGaw

Email: [email protected]

Semester 2 (Early-Start)

Subject Coordinator

This subject is the culmination of each student's studies in Master of Architecture. It will consist of a number of autonomous studio groups offering a range of opportunities for students to demonstrate an original approach to design synthesis in the relevant discipline, which is based on research and critical thinking. These studios may offer an interdisciplinary experience with students working alongside others in a parallel design discipline.

Students will be expected to demonstrate mastery of design resolution, conceptual engagement and aesthetic expression.

With course coordinator approval, high-achieving students may undertake the Design Thesis as an individually supervised design investigation. Similarly, under exceptional circumstances and with course coordinator approval, the Design Thesis may be undertaken as a written thesis.

Note : For Independent thesis, please check Extra information - Subject Notes

Intended learning outcomes

On completion of this subject, students will be able to:

• Demonstrate a capacity to make a contribution to the existing body of knowledge in architectural theory and practice;
• Demonstrate critical awareness of how their chosen specialisation contributes to this body of knowledge;
• Demonstrate an understanding of design as a form of research enquiry.

Generic skills

• Written, verbal and graphic presentation of ideas
• Correct use of design terminology
• Ability to analyse social and cultural contexts
• Critical thinking and analysis
• Creative response to complex problems
• Ability to select the appropriate design approach

Last updated: 31 October 2023

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Thesis Writing Hub: Templates

• Submission Process
• Formatting Guidelines
• Required Signed Forms
• Planning your Research
• Finding Resources
• Citation Management

It is strongly recommended that you start using a template at the beginning of your writing process.

The templates are based on the Guidelines for formatting your Thesis in Microsoft Word . They have correct margins, line spacing and page numbering, appropriate formatting of the front pages (you only need to delete/replace the text in parenthesis and in italic) , chapter and section headings in acceptable formats, and heading and subheading styles.

The templates are to be used as they are, regardless of the referencing style chosen (APA, MLA, IEEE, etc…). You may follow the rules of the style in all aspects not mentioned in this file, such as formatting of tables, list of references and in-text citations, etc.

If you are working on your dissertation in partnership with another academic institution, kindly contact lib- [email protected] and check the PhD Cotutelle Template .

Main Templates (All Degrees & All Departments Except Education and Arabic)

                                       Template Option 1                                                                               Template Option 2 

                                         ABC Headings                                                                                            123 Headings

Department-Specific Templates

                                       Arabic Template                                                                    Department of Education Template                                             

               If thesis/dissertation's main language is Arabic                                        For use by students majoring in Education only

          (Department of Arabic and Near Eastern Languages)

Using LaTex (Optional)

If you prefer writing your thesis/dissertation using LaTex instead of Word, use the THESIS/DISSERTATION LaTex Template on Overleaf .

For help with LaTex formatting, you may refer to the Overleaf Pro+ guide .

• << Previous: Formatting Guidelines
• Next: Required Signed Forms >>
• Last Updated: Apr 3, 2024 3:52 PM
• URL: https://aub.edu.lb.libguides.com/Thesis

• Senior Thesis

For an A.B. degree, a research thesis is strongly encouraged but not required; a thesis is necessary to be considered for High or Highest Honors. Additionally, a thesis will be particularly useful for students interested in pursuing graduate engineering research. 

In the S.B. degree programs, every student completes a design thesis as part of the required senior capstone design course (ES 100hf). During the year-long course students design and prototype a solution to an engineering problem of their own choice.

The guide below provides an overview of the requirement for a thesis in Biomedical Engineering:

• Thesis Guide

Some recent thesis examples across all of SEAS can be found on the Harvard DASH (Digital Access to Scholarship at Harvard) repository .

Biomedical Engineering (A.B.) Senior thesis examples:

• Engineering a Functionalized Biofilm-Based Material for Modulating Escherichia Coli’s Effects in the Mammalian Gastrointestinal Tract
• The MiR-130/301 Family Controls Cellular Survival in Pulmonary Hypertension
• The Role of Cell Compaction in Radiation Therapy for Breast Cancer
• Towards 3D Bioprinting of a Vascularized Convoluted Proximal Tubule
• Biomechanical Therapy: A Soft Robotic Drug Delivery Device
• The Clean Cut: Design, Synthesis, Assay Optimization, and Biological Evaluation of Compounds That Can Produce Double Strand Breaks in Deoxyribonucleic Acid
• Dilating Health, Healthcare, and Well-Being: Experiences of LGBTQ+ Thai People (Joint with Women and Gender Studies)

Biomedical Engineering (S.B.) Senior thesis examples:

• Predicting the Severity of Levodopa-Induced Dyskinesia of Parkinson’s Patients Through Template Matching
• Development of 3D-Printed Bony Implants for Biomimetic Ear Canal Wall Reconstruction
• Powassan Nanobody Diagnostic
• Microfluidic-based In-droplet Transcript Barcoding Platform for Identification of T Cell Receptors and Target Epitopes
• Adjustable stiffness splint based on principles of laminar jamming
• Oil-Infused Silicone Tympanostomy Tube as a Novel Treatment of Recurrent Otitis Media
• Cardiac Fibrosis-on-a-Chip: Fibrotic Cardiac Tissues on Biomimetic Nanofiber Scaffolds for Anti-fibrosis Drug Screening
• In Vitro Model for the Placental Barrier
• Multi-drug Device for Improved Diabetic Control
• Correlation of Core to Skin Temperature for Temp-Sensing Wearable Device
• Alginate Hydrogels for Topical Delivery of Ultra-High Concentrations of Antibiotics in Burn Wounds
• Cellular Invasion into Three-Dimensional, RGD-Functionalized PTFE Mesh
• Insulin transdermal patch
• Handheld Device for Dermatological Diagnosis
• Estimating Limb Propulsion

Engineering A.B. Thesis Extensions and Late Submissions

Thesis extensions will only be granted in extraordinary circumstances, such as hospitalization or grave family emergency. An extension may only be granted by the DUS (who may consult with thesis advisor, resident dean, and readers). For joint concentrators, the other concentration should also support the extension. To request an extension, please email your ADUS or DUS, ideally several business days in advance. Please note that any extension must be able to fall within our normal grading, feedback, and degree recommendation deadline, so extensions of more than a few days are usually impossible.

Late submissions of thesis work will not be accepted. A thesis is required for joint concentrators, and a late submission will prevent a student from fulfilling this requirement. Please plan ahead and submit your thesis by the required deadline.

Senior Thesis Submission Information for A.B. Programs

Senior A.B. theses are submitted to SEAS and made accessible via the Harvard University Archives and optionally via  DASH  (Digital Access to Scholarship at Harvard), Harvard's open-access repository for scholarly work.

In addition to submitting to the department and thesis advisors & readers, each SEAS senior thesis writer will use an online submission system to submit an electronic copy of their senior thesis to SEAS; this electronic copy will be kept at SEAS as a non-circulating backup. Please note that the thesis won't be published until close to or after the degree date. During this submission process, the student will also have the option to make the electronic copy publicly available via DASH.  Basic document information (e.g., author name, thesis title, degree date, abstract) will also be collected via the submission system; this document information will be available in  HOLLIS , the Harvard Library catalog, and DASH (though the thesis itself will be available in DASH only if the student opts to allow this). Students can also make code or data for senior thesis work available. They can do this by posting the data to the Harvard  Dataverse  or including the code as a supplementary file in the DASH repository when submitting their thesis in the SEAS online submission system.

Whether or not a student opts to make the thesis available through DASH, SEAS will provide an electronic record copy of the thesis to the Harvard University Archives. The Archives may make this record copy of the thesis accessible to researchers in the Archives reading room via a secure workstation or by providing a paper copy for use only in the reading room.  Per University policy , for a period of five years after the acceptance of a thesis, the Archives will require an author’s written permission before permitting researchers to create or request a copy of any thesis in whole or in part. Students who wish to place additional restrictions on the record copy in the Archives must contact the Archives  directly, independent of the online submission system. 

Students interested in commercializing ideas in their theses may wish to consult Dr. Fawwaz Habbal , Senior Lecturer on Applied Physics, about patent protection. See Harvard's policy for information about ownership of software written as part of academic work.

In Bioengineering

• Undergraduate Engineering at Harvard
• Concentration Requirements
• How to Declare
• Who are my Advisors?
• Sophomore Forum
• ABET Information
• Research for Course Credit (ES 91R)
• AB/SM Information
• Peer Concentration Advisors (PCA) Program
• Student Organizations
• How to Apply
• PhD Timeline
• PhD Model Program (Course Guidelines)
• Qualifying Exam
• Committee Meetings
• Committee on Higher Degrees (CHD)
• Research Interest Comparison
• Collaborations
• Cross-Harvard Engagement
• Clubs & Organizations
• Centers & Initiatives
• Alumni Stories

• How It Works
• PhD thesis writing
• Master thesis writing
• Bachelor thesis writing
• Dissertation writing service
• Dissertation abstract writing
• Thesis proposal writing
• Thesis editing service
• Thesis proofreading service
• Thesis formatting service
• Coursework writing service
• Research paper writing service
• Architecture thesis writing
• Computer science thesis writing
• Engineering thesis writing
• History thesis writing
• MBA thesis writing
• Nursing dissertation writing
• Psychology dissertation writing
• Sociology thesis writing
• Statistics dissertation writing
• Buy dissertation online
• Write my dissertation
• Cheap thesis
• Cheap dissertation
• Custom dissertation
• Dissertation help
• Pay for thesis
• Pay for dissertation
• Senior thesis
• Write my thesis

How To Write A Research Design Like A Pro

The overall strategy that a researcher chooses to address all the different parts of their study in a logical and clear manner is known as a research design.

So, what is research design in research paper? A research design is a general plan explaining what one looks to do so as to answer the research question. Generally, it is a detailed outline of how research or an investigation will take place including; how data will be collected, which tools will be employed and how they will be used, and the ways through with the data will be analyzed.

It lays out the method you use to collect, measure, and analyze information. It states that you do this logically and coherently to ensure that you thoroughly address the research problem with which you are dealing. There are numerous types of research design including:

Action Study Research Design Case Study Research Design Casual Research Design Cohort Research Design Cross-Sectional Research Design Correlational Research Design Descriptive Research Design Experimental Research Design Exploratory Research Design Historical Research Design Longitudinal Research Design Observational Research Design Philosophical Research Design Qualitative Research Design Quantitative Research Design Sequential Research Design

The research paper design you choose depends on the research problem. You should analyze the problem carefully and consider it from numerous perspectives. You may consider using a mixed methods research design which is a combination of any two designs listed above. But you must choose a type of research design that is strong and will make your project progress smoothly.

Example Of A Nursing Research Design

To assess the links between professional satisfaction, job satisfaction, and contributing factors using a quantitative approach, an appropriate method is to gain use questionnaires or surveys that provide numerical data from the sample. To achieve an appropriate sample, a sampling plan should be developed. In this case, the population of concern will be identified. This will be nursing staff members, possibly across a wide range of departments to gain a better insight into the links overall. A stratified sampling method would be appropriate here to ensure that the sample is made up of sub-populations that are in line with the sub-populations of the total: the strata should include gender, number of years in nursing, department, and any other factors that could be confounding variables. This will ensure that the sample is representative of the population of interest. In a population of 1000 nurses, a confidence interval of five, and a confidence level of 99%, the sample size needed is 400. Inclusion criteria will include: nursing staff working at the hospital, ability to speak the language that the survey is administered in, and those that have given informed consent. Exclusion criteria will be visiting nursing staff, staff who are not nurses, and those that do not hold relevant nursing criteria.

Sampling Plan: Qualitative

A more appropriate methodology for qualitative approaches is to use interviews or focus groups. This means that the sample size can be much smaller, often as low as ten. In this case, the sampling plan will have the same population of concern, but a different approach to sampling can be used. It may be more appropriate to use quota, self-selection sampling here, as nursing staff need to be willing to give up some time to respond. This has drawbacks, including self-selection bias, but it would be unethical to force nursing staff to participate in the project, especially considering interviews can take one hour or more. The inclusion and exclusion criteria are as above.

How to Write a Research Design Proposal

For most research problems, you will have to make some tradeoffs. One design can be strong in some areas and weak in other areas. This is the reason many students choose to select more than one design to gather all the information accurately and effectively they need to address the problem. This is one of the first things you should know about how to write research design and methods section.

• Consider Your Practicalities and Priorities

What do we mean when we say you need to think about practicalities and priorities? Another thing to know about how to write design and methodology of the research is asking several questions before settling on one or two methodologies. You will not have the time or resources to conduct tests using several research designs, so you need to write down and answer precisely what your priorities are and the practical nature of your study.

A good place to start is at the library where you have access to other academic studies in your field. You can find similar studies and look at published samples that have been approved by experts in the field. You can also get a sense of the number of resources you have available. Pre-planning is a great way of making sure your project stays on track.

• Determine the Kind of Information You Need

The next to know about how to write a qualitative research design is figuring out the kind of information or data you need to answer the research problem. There are two places where you get this: through primary and secondary data. In your research study, you get original data through experiments, interviews, and surveys. This is information you analyze and incorporate into your research finding.

Your study will also incorporate information gathered by someone else in previous studies. This type of data is available in libraries and online databases where you can look at national statistics, official records, and publications from academic and government sources.

• Identify How You Are Going to Collect Information

Once you know the kind of information you need to gather (qualitative and quantitative) you need to decide where, when, and how you will gather it. How to write a research design requires you to describe your research methods. This means putting in detail the materials, procedures, tools, and techniques you will use and apply. You also need to point out the criteria you will use to choose your participants and sources. (For example, how many participants will you need to fill out services to get a good method to sample).

• Decide How You Are Going to Analyze the Information

Another thing you need to know about how to write a research design relates to the way you are going to analyze the information you collect. The process of analysis is the last step you need to develop your research design. Numerous computer applications will sort through information and retrieve what you need to answer the research problem (For example, Access and Excel). Identify the ones you will use and state this in the research design.

• Draft Your Research Design as You Would Other Sections

Now you can start writing the first draft. You should approach this like you would other academic assignments. Use a draft that lists all the sub-sections you need to address in the research design. Be clear and concise. The research design should not include your opinions. It must show the reader an exact description of the way you conducted your study.

• Revise Your Research Design After Some Time Away

Hindsight is one of the best things that can come from separating yourself from your assignment for a few days. We recommend students remove themselves completely from their work to get a mental break. The distance will help them rethink their writing and make changes that improve the overall quality of an assignment.

The trick is to do stay away a few days instead of just a few hours. The time away from any piece of writing will allow for more self-evaluation that is objective. Many students will find ways to remove, add, or rearrange words, phrases, sentences, and paragraphs that make their assignments stronger.

• Edit and Proofread Your Research Design for Perfection

These two activities are not interchangeable. Editing focuses on deep issues like correcting sentence constructions and word choices. A thorough editing session will improve things like clarity, readability, and tone. Proofreading focuses on details like grammar, punctuation, and misspellings. It will also look at page numbering, formatting, alignment, and visual elements.

Both activities are important stages of the writing process. A great editor will begin his or her work during the revising process. A great proofread will also begin his or her work during the editing process. While they may overlap you should always treat them as two separate tasks and designate enough time to do each without distraction.

• Have a Colleague Review Your Work for Feedback

Having a colleague or peer review your work is an important step to the academic writing process. A person or a group of people that understands your field and the high standard of researching and writing that comes with putting together a great research paper can valuable toward your success at the collegiate and graduate levels. Even if you can only show your work to one person for a few hours, his or her feedback can help you make changes to improve the overall quality of your research design.

Here are some questions you should consider before asking someone to review your work:

Do they understand the research subject and/or topic? Do they know the professor or panel that will grade your work? Have they submitted research studies in the past? Do they have great to excellent grades when it comes to research? Are they committed to providing you constructive criticism and feedback?

What to Do If You Can’t Do the Research Design

You may not have enough time to create this section, especially when you have a short deadline. On these occasions, it is a good idea to find a template for a research design paper. You can find templates online or can refer to published research papers in academic journals. The formats are standard so as long as you apply your words to a template that matches your design approach.

If you need more information or assistance learning about how to write a research design section, our customer support team can point you to more resources or put you in contact with one of our academic writing and editing experts. Each expert has earned either a bachelor’s or master’s degree and specialize in specific disciplines. You can rest assured that you will be assigned someone that knows your field inside and outside and can give you the writing research design and methodology help that you need to excel academically.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Comment * Error message

Name * Error message

Email * Error message

Save my name, email, and website in this browser for the next time I comment.

As Putin continues killing civilians, bombing kindergartens, and threatening WWIII, Ukraine fights for the world's peaceful future.

Ukraine Live Updates

• Locations and Hours
• UCLA Library
• Research Guides

Architecture and Urban Design

• Dissertations and Theses
• Researching Architects
• Researching Buildings
• Encyclopedias, Dictionaries and Architectural Styles
• Design Manuals, Standards and Building Types
• Educational and Professional Practice
• Article Indexes and Databases
• New Image Content - Archivision Library (JSTOR Images)
• Newspapers and News Sources
• Architectural History
• Architectural Photography
• Building Envelopes and Wall Assemblies
• Building Materials
• Codes and Regulations
• Construction and Fabrication
• Digital Mapping and Visualizations
• Portfolios and Model Making
• Professional Practice and Licensing
• Specifying and Estimating
• Sustainable Architecture
• Theory and Criticism
• Understanding Drawings and Plans
• Urban Design
• Film and Video Collections
• Architecture and Urban Design Research at UCLA
• Archives and Special Collections at UCLA
• Arts Library Browsing Guide
• Blogs and Podcasts

Dissertations at UCLA and Beyond

• Center for Research Libraries (CRL) Foreign Dissertations Search the CRL Catalog for dissertations already held at the Center. If a foreign dissertation is not at CRL, UCLA's Interlibrary Loan Service will request that CRL acquire it for your use. This special issue of Focus on Global Resources describes CRL's extensive collection of foreign dissertations.
• Networked Digital Library of Theses and Dissertations This international organization promotes the adoption, creation, use, dissemination, and preservation of electronic analogues to traditional paper-based theses and dissertations in order to more effectively share knowledge.

Selected Dissertations — Architecture and Urban Design

• Architecture
• The search for a theory in architecture : Anglo-American debates, 1957-1976 / Louis Martin. Thesis--Ph.D.; Princeton University, 2002.
• Affordable Housing in High Opportunity Areas : Insights for Fair Housing Advocates / by Emmanuel Proussaloglou Thesis--M.U.R.P.; University of California, Los Angeles, 2023.
• Connecting Pico : a study of alternatives to re-knit the Pico Neighborhood that was divided by the I-10 freeway in Santa Monica, California / by Cecilia Garcia Urban Planning Project (M.A.)--UCLA, 2010.
• Streetscape improvement recommendations: CRA/LA Cleantech Corridor / by Daniel Caroselli Urban Planning Project (M.A.)--UCLA, 2011.
• Politics and the adoption of local development policies in Southern California cities / by Todd Andrew Donovan Dissertation--Ph. D.; University of California, Riverside, 1991.
• << Previous: Newspapers and News Sources
• Next: Special Topics >>
• Last Updated: May 29, 2024 4:31 PM
• URL: https://guides.library.ucla.edu/architecture

University of Washington Links

• College of Arts & Sciences
• Directories
• Concentrations
• Photo/Media
• Painting + Drawing
• 3D4M: ceramics + glass + sculpture
• Field Studies
• Student Work
• Study Abroad
• Art History BA
• Art History Minor
• Art History MA Thesis
• Art History MA Practicum
• Art History PhD
• Student Research
• Interaction Design
• Visual Communication Design
• Industrial Design
• Laptop Requirement
• Master of Design
• BDes/MDes Shows
• COVID-19 Updates
• Voicing a Concern
• News + Events
• Exhibitions

Mobile Menu

• Graduate Students
• Visiting Artists + Lecturers
• Seattle Arts + Culture
• Jobs, Internships, and Opportunities
• First Day Attendance
• Final Exam Attendance
• Career Fair
• Design Travel Award Application
• Finding an Internship
• Finding a Job
• Portfolio Advice
• Resume Advice
• Alumni Blog
• Alumni Statistics
• Prevention Plan
• For Students
• Press Releases
• Stay Connected
• Undergraduate Students
• Jobs + Opportunities
• Academic Advising
• Student Voice Project
• Scholarships + Awards
• Advisory Board
• A-Z Directory
• Recent News
• News Archive
• Technology + Equipment
• Rome Center
• Exhibitions, 2022-2023
• Exhibitions, 2021-2022
• Exhibitions, 2020-2021
• Exhibitions, 2019–2020
• Exhibitions, 2018–2019
• Exhibitions, 2017–2018
• Exhibitions, 2016–2017
• Exhibitions, 2015–2016
• Exhibitions, 2014–2015
• Jacob Lawrence Legacy Residency
• The Black Embodiments Studio
• BIPOC Graduate Student Curatorial Fellowship
• Critical Art Writing Group

You are here

• Autumn 2024

DESIGN 596 B: Directed Research in Interaction Design