creating a looping powerpoint presentation

How-To Geek

How to loop a powerpoint presentation.

If you're showing off a lot of photos at a special event, set your presentation to progress at a continuous, automatic loop. Here's how.

Quick Links

Set up your slideshow to be looped, apply automatic slide transitions.

Slideshows are sometimes used to display images at events, such as weddings or trade shows. Whatever the occasion might be, you’ll want to loop your PowerPoint presentation so your guests aren’t staring at a blank screen. Here’s how it’s done.

First, open your PowerPoint presentation in which you would like to loop. Once open, navigate to the “Set Up” group of the “Slide Show” tab and then select the “Set Up Slide Show” button.

The “Set Up Show” window will appear. In the “Show options” group, check the box next to “Loop Continuously until Esc.” Once selected, click “OK” in the bottom-right corner of the window.

Now, when you play your slideshow, it will end only when you press the “Esc” key instead of when you've finished the last slide.

Related: How to Make YouTube Videos Loop Continuously

One caveat: With the way we currently have it set up, the slideshow will proceed only when someone clicks the mouse button. That’s fine if there will be a speaker present at all times. Otherwise, you’ll need to set up automatic slide transitions.

Head back to the “Set Up Show” window by selecting “Set Up Slide Show” in the “Set Up” group of the “Slide Show” tab.

There are a couple of options you need to select, but one important note is that you must first select “Using Timings, If Present” under the “Advance Slides” group.

The next option we select will lock a few things in place (which is why you need to select “Using Timings, If Present” first).

Under the “Show Type” group, select “Browsed at a Kiosk (Full Screen)." The “Loop Continuously until Esc” option will be enabled automatically if you haven’t already turned it on, and the option you’ve selected under “Advance Slides” will remain unchanged.

Select “OK” when ready to proceed.

Without the “Browsed at a Kiosk” option enabled, the automatic slide progressions would be disabled if someone were to press the Back key. With it enabled, the Forward and Back keys are locked, allowing the slideshow to automatically progress unattended without fear of someone breaking it.

Now it’s time to set the timings of the slides. Head over to the “Transitions” tab. In the “Timing” group, check the box next to “After” and set the timing at which you’d like each slide to progress. Note that it doesn’t matter if the box next to “On Mouse Click” is checked or not---it won’t work.

After that, select the “Apply to All” option in the same group.

Now, when you play your slideshow, it will continuously loop without interruption. To exit the slideshow, press the “Esc” button.

How to Loop a PowerPoint Presentation?

Table of Contents

PowerPoint presentations are a go-to for clear and informative content delivery. But what if you want your presentation to run on repeat, like at a kiosk or digital sign? The good news is, that PowerPoint has a built-in feature to loop your slideshow, ensuring your message stays on display without interruption. 

This blog post will guide you through the simple steps to set your presentation on a loop, keeping your audience engaged and informed around the clock.

What is PowerPoint Looping?

Normally, in a PowerPoint presentation, you have to manually move from one slide to the next by pressing keys on the keyboard or clicking buttons on a mouse or presentation remote.

However, when you enable looping in PowerPoint, the presentation progresses automatically from one slide to the next without requiring manual input. This eliminates the need for the presenter to interact with the computer or mouse during the presentation.

With PowerPoint looping, you can also set each slide to display automatically for a specified duration, determined by you. Once the preset time elapses, the next slide seamlessly appears. Additionally, upon reaching the final slide, the slideshow automatically starts over from the beginning.

Why Do You Need to Loop Your Slideshow in PowerPoint? 

There are several reasons why you might want to loop your slideshow in PowerPoint:

• Unattended Presentations: Looping is ideal for situations where the presentation runs without a presenter. This could be at a kiosk, trade show booth, or in a waiting room. Looping ensures the information is continuously displayed for viewers to come and go as they please.
• Automated Playback: Looping allows for a hands-off presentation experience. Once started, the presentation progresses automatically, freeing you up to greet attendees or answer questions.
• Self-Paced Learning: Looping can be useful for self-paced learning environments. Viewers can revisit slides or take breaks without needing someone to control the flow.
• Continuous Engagement: Looping keeps the audience engaged with a constant stream of information. This can be beneficial for displaying menus, directions, or other ongoing updates.

Create presentation slides with AI in Seconds in Google Slides

10M+ Installs

Works with Google Slides

How to Make a PowerPoint Presentation loop?

Ready to loop your presentation? Here’s how it’s done:

Step 1:  Open your PowerPoint and head over to the “Slide Show” tab.

Step 2:  Click the button that says “Set Up Slide Show.” A new window will pop up.

Step 3:  Under “Show options,” find the magic checkbox that says “Loop continuously until ‘Esc’.” Check that box to make your presentation run on repeat.

Step 4:  Want to control how long each slide shows? Look for the option “Automatically advance slides” and check it. Then, use the up and down arrows to set the display time for each slide.

Step 5:  Once you’re happy with the settings, click “OK” to save them.

Step 6: Time to loop! Go back to the “Slide Show” tab and click “From Beginning” (or “From Start”). Your presentation will start playing and keep going until you press the “Esc” key.

How To Loop a PowerPoint SlideShow from Selected Slides?

PowerPoint lets you loop a customized selection of slides, creating engaging presentations that run unattended. This eliminates the need for manual slide changes while maintaining audience interest. Here’s how to loop specific slides:

Step 1:  Select Slides: In the Slide Sorter view, hold “Shift” and click the first and last slides you want to loop.

Step 2:  Enable Looping: Go to the “Slide Show” tab and click “Set Up Show.” Check the box for “Loop continuously until ‘Esc'” and choose “Show slides” from the dropdown menu. Select “From” and enter the slide number where your loop should begin.

Step 3:  Create Custom Show (Optional): For easier access, name your looped sequence as a “Custom Show” within the “Set Up Show” dialog.

Step 4:  Start Looping: Navigate back to the “Slide Show” tab and choose “Custom Slide Show” to launch your looped presentation.

Closing Thoughts

Looping your PowerPoint presentation is a simple yet powerful technique that unlocks a variety of use cases. By following these steps, you can ensure your message runs continuously, keeping your audience informed and engaged, whether it’s at a kiosk, trade show booth, waiting room, or any other scenario that demands unattended playback. 

• No design skills required
• 3 presentations/month free
• Don’t need to learn a new software

Frequently Asked Questions

My presentation has animations and transitions. will they loop as well.

Absolutely! When you loop your presentation, animations and transitions will also repeat continuously, regardless of the looping method you choose.

Does looping affect animation timing?

There’s a possibility. Looping might affect how your animations play out, especially if they have specific timings set. To avoid any hiccups, be sure to thoroughly test your looped presentation. This will ensure your animations sync smoothly with the slide transitions.

Can I loop specific slides in my PowerPoint presentation?

Yes! PowerPoint gives you the flexibility to loop a selected group of slides, creating engaging presentations that run unattended.

How do I stop or pause a looped slideshow in PowerPoint?

Need a break? Simply press the “Esc” key on your keyboard to interrupt the looped slideshow at any time.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can! PowerPoint allows you to adjust the slide transition settings for each slide. This lets you control how long each slide displays, creating a tailored and dynamic looping experience.

Save Time and Effortlessly Create Presentations with SlidesAI

How to Loop a PowerPoint Slide Show to Repeat Automatically

Set up a PowerPoint Presentation That Loops or Repeats Continuously

by Avantix Learning Team | Updated November 12, 2021

Applies to: Microsoft ®  PowerPoint ®  2013, 2016, 2019 and 365 (Windows)

You can set up a PowerPoint slide show to loop or repeat automatically. A looping presentation can be used at events, trade shows or even in a reception area in an office. The easiest way to set up a slide show to loop or replay continuously is to apply automatic transitions and then configure Slide Show settings.

Recommended article: 5 PowerPoint Keyboard Shortcuts to Run a Slide Show

Do you want to learn more about PowerPoint? Check out our virtual classroom or in-person PowerPoint courses >

Screenshots in this article are from PowerPoint 365 but are similar in older versions of PowerPoint.

Step 1: Apply transitions to automatically advance slides during a slide show

Transitions occur between slides when you run a slide show.

To apply transitions to automatically advance slides during a slide show:

• In Normal View or Slide Sorter View, display or select a slide.
• Click the Transitions tab in the Ribbon.
• Select a transition in the Transitions gallery (such as Fade).
• Click Effect Options and choose the desired option. Effect Options change depending on the transition you selected.
• In the Timing group, click the arrows beside Duration to set the timing you want (in seconds) for the transition. You may also type a duration.
• In the Timing group, under Advance Slides, deselect or uncheck On mouse click and beside After, select or click the up and down arrows to set the timing to transition to the next slide. You may also type a duration.
• In the Timing group, click Apply to All.

In the Transitions tab in PowerPoint, you can select the type of transition (such as Fade) as well as timing options:

Step 2: Set up a presentation to loop during a slide show

To set up a PowerPoint presentation to loop during a slide show:

• Click the Slide Show tab in the Ribbon and then click Set Up Slide Show. A dialog box appears.
• Under Show type, if you select Presented by a speaker (full screen), the speaker or those watching the slide show will have control over when they advance slides. This is the default setting for slide shows. If you select Browsed by an individual (window), those watching the slide show do NOT have control over when slides advance. If you select Browsed at kiosk (full screen), those watching the slide show do NOT have control over when slides advance and the presentation automatically loops until those watching press Escape (Esc).
• Under Show options, select Loop continuously until 'Esc'. You will be able to select this option if you selected one of the first two options under Show type.

Below is the Set Up Show dialog box with Presented by speaker selected and looping enabled:

If you want to set specific timings for slides to advance or to add narration, check out the article How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running Presentation) . If you have audio or video in the presentation, you'll need to set the media to play automatically (on the Playback tab in the Ribbon) and animations will also need to be set to run automatically.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Embed a YouTube Video in PowerPoint

How to Hide and Unhide Slides in PowerPoint (with Shortcuts)

How to Insert Video in PowerPoint (from a File on Your PC or a Shared Drive)

PowerPoint Keyboard Shortcuts to Play and Control Video During a Slide Show

How to Add Animation in PowerPoint (Animate Images, Text and Other Objects)

Related courses

Microsoft PowerPoint: Intermediate / Advanced

Microsoft PowerPoint: Design for Non-Designers

Microsoft PowerPoint: Animations Bootcamp

Microsoft Excel: Intermediate / Advanced

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at [email protected] if you'd like to arrange custom instructor-led virtual classroom or onsite training on a date that's convenient for you.

Copyright 2024 Avantix ® Learning

You may also like

How to Insert or Type E with an Accent Mark in PowerPoint (È, É, Ê, Ë, è, é, ê, or ë)

You can insert or type e with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter e can be inserted with an accent in both upper or lower case in text boxes or placeholders on slides, the slide master or layouts. The following are common accents in upper or lower case – È, É, Ê, Ë, è, é, ê, or ë.

How to Fade a Picture or Part of a Picture in PowerPoint (Using a Gradient)

You can fade a picture in PowerPoint by drawing a rectangle shape on top of the picture and then filling the rectangle with a gradient from opaque to transparent. This technique is often used to fade an image into the background of a slide. Since the rectangle is placed on top of the image and then text may be placed on top of the rectangle, you may need to reorder the objects.

How to Lock an Image, Shape or Other Object in PowerPoint

You can now lock an image, shape or other object in PowerPoint. Objects can be locked in Normal View or Slide Master View. Only PowerPoint 365 users can lock objects to prevent moving and resizing. This is helpful if you want to select and move other objects on the slide or prevent others from moving or resizing an object. You can lock items using the context menu or the Selection Pane.

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at [email protected]

Our Courses

Avantix Learning courses are offered online in virtual classroom format or as in-person classroom training. Our hands-on, instructor-led courses are available both as public scheduled courses or on demand as a custom training solution.

All Avantix Learning courses include a comprehensive course manual including tips, tricks and shortcuts as well as sample and exercise files.

VIEW COURSES  >

Contact us at  [email protected]  for more information about any of our courses or to arrange custom training.

Privacy Overview

Pin it on pinterest.

• Print Friendly

How to Loop a PowerPoint Presentation

Just like an animated GIF or video clip, you can loop a slideshow in Microsoft PowerPoint. This is ideal if you set the presentation to automatically play because it starts at the beginning each time it ends to create an infinite loop.

Here’s how to loop a PowerPoint presentation on Windows and Mac. Currently, PowerPoint on the web doesn’t offer a Loop feature.

Set the Timing to Advance the Slides

Before you set your PowerPoint presentation to loop, you may want to adjust the timing to advance through the slides. You can use the same time for each slide or display particular slides for a longer amount of time.

• Open your presentation in PowerPoint on Windows or Mac and go to the Transitions tab.
• In the Timing section of the ribbon, check the box for After and enter the time in seconds to the right. You can also use the arrows to move the time up or down in small increments.

• To set different times for slides, select the next slide and use the above step to choose the After timing. Continue this process for the remaining slides.
• To set the same timing for all slides in the presentation, select Apply To All in the Timing section.

• If you only want continuous play to advance the slides, you can uncheck the box directly above for On Mouse Click . However, if you want the ability to advance the slides with a mouse click and after a certain amount of time, you can leave the box checked.

Once you have the timings set to advance the slides, you can turn on the Loop setting.

• Go to the Slide Show tab and select Set Up Slide Show in the Set Up section.

• Under Show type , choose an option to play your presentation.
• If you plan to present the slideshow or have an individual view the show, choose one of the first two options. Then, check the box for Loop continuously until ‘Esc’ in the section beneath.

Confirm that the Using timings, if present setting is marked under Advance Slides.

• If you want the slideshow to play automatically , choose the third option, Browsed at a kiosk . You’ll then see the Loop continuously until ‘Esc’ and Using timings, if present settings are automatically marked and disabled for changing.

• Adjust any other options per your preference and use the OK button to save the settings.

When you’re ready to begin the slideshow and let it play, check out our how-to for starting the PowerPoint presentation as well as navigating it if needed.

Just Let It Play

By looping a PowerPoint presentation, you don’t have to lift a finger to advance through the slides. You can display it at a kiosk, in a waiting room, or at a convention booth and just let it play over and over.

For more, look at how to add narration for an engaging PowerPoint presentation .

Sandy Writtenhouse is a freelance technology writer and former Project, Department, and Program Manager. She turned her education, job experience, and love of technology into a full-time writing career. With all sorts of gadgets in her home and her hands, she seeks to help others make life easier through technology. Read Sandy's Full Bio

Read More Posts:

How to loop a PowerPoint slideshow so that it automatically starts over as soon as it ends

• To loop a PowerPoint slideshow, you'll need to enable looping in the "Set Up Slide Show" menu.
• Once you set your PowerPoint to loop, it'll start over from the beginning automatically after playing the last slide.
• Visit Business Insider's Tech Reference library for more stories .

If you've designed a Microsoft PowerPoint presentation that's meant to be viewed repeatedly, such as on a kiosk or in a museum installation, you can adjust the settings in PowerPoint so that your slideshow "loops" instead of ending after one viewing.

Getting a PowerPoint to loop is easy. Read on to find out how, using PowerPoint for both Mac and PC.

Check out the products mentioned in this article:

Microsoft office (from $149.99 at best buy), apple macbook pro (from $1,299.00 at apple), acer chromebook 15 (from $179.99 at walmart), how to loop a powerpoint presentation.

1. Open the Microsoft PowerPoint presentation that you want to loop.

2. With your PowerPoint presentation open, click on the "Slide Show" tab, then click on "Set Up Slide Show." 

3. In the pop-up window that appears, click on the box next to "Loop continuously until 'Esc'" so that a small checkmark appears inside the box. Feel free to adjust any other settings in this menu as well. Click "OK" when you're finished.

4. To test whether your PowerPoint can loop successfully, click on the "From Beginning" or "Play From Start" button in the Slide Show tab. Click through the slideshow until you reach the end. When your PowerPoint reaches its final slide, it should start over from the beginning automatically. When you're confident that looping is enabled, and you're ready to close the slide show, press the Esc key.

Related coverage from  Tech Reference :

How to add a border to slides in powerpoint, and give your slideshow a sleek design, how to embed a youtube video into your microsoft powerpoint presentations using a mac or pc, how to convert google slides to a powerpoint presentation in 4 easy steps, how to create a custom powerpoint template to use or share with others, how to copy or duplicate a powerpoint slide and put it anywhere in your slideshow.

Insider Inc. receives a commission when you buy through our links.

Watch: We compared the $1,200 MacBook Air with the $500 Surface Go, and the results were a mess

• Main content

Home Blog PowerPoint Tutorials How to Loop a PowerPoint

How to Loop a PowerPoint

When a PowerPoint slideshow ends, the screen turns blank after the last slide. However, you can opt to restart the presentation from the first slide by running the slide deck in loop. You might want to loop a slide if you have created a PowerPoint slideshow that needs to run on a screen in loop, such as a self-running slideshow for a kiosk, a PowerPoint template indicating a break at an event, or when you need to go back to one or more of the previous slides from the start for a quick review of the presentation.

How to Make PowerPoint Loop

To loop PowerPoint, go to Slide Show -> Setup Show .

From the dialog box that appears, select Loop continuously until ‘Esc’ to enable looping your slides. By default, all slides are looped in a sequence.

How to Loop PowerPoint from Selected Slides

To loop specific slides, go to Slide Show -> Setup Show , enable loop, and select the slides to run in a loop via Show Slides .

How to Loop PowerPoint Slides Manually and Automatically

You might want to create a slideshow from break or countdown-themed PowerPoint templates or Google Slides templates to indicate a break during an event.

You can select the time each slide remains on screen via the Transitions tab. The Timings menu provides the option to select the duration for each slide and whether you intend the slides to move automatically or on mouse-click.

To loop PowerPoint slides manually or automatically, go to Slide Show -> Setup Show , enable the loop option, and go to Advance slides . Select Manually for moving slides on mouse click, arrow keys, or PowerPoint remote. Alternatively, select Use timings .

Final Words

Whether you need to loop a PowerPoint presentation manually or automatically for an event or to create a self-running slideshow that loops PPT, you can use the instructions mentioned above to customize the settings for your slide deck according to need.

Like this article? Please share

Microsoft PowerPoint, PowerPoint Tools Filed under PowerPoint Tutorials

Related Articles

Filed under PowerPoint Tutorials • May 17th, 2024

How to Add Fonts to PowerPoint

Create custom presentation slides by learning how to add new fonts in PowerPoint. Step-by-step guide.

How to Track Changes in PowerPoint

Just like with Google Slides, you can check who made adjustments to your files in collaborative work. Learn how to track changes in PowerPoint here!

Filed under PowerPoint Tutorials • May 14th, 2024

How to Create a Roadmap in PowerPoint

Learn how to create effective roadmap presentations in PowerPoint with this step-by-step guide and recommended templates.

Leave a Reply

How to Make a PowerPoint Loop? (Step-By-Step Guide)

Have you ever come across a presentation that just keeps on going? It’s mesmerizing, isn’t it? Imagine being able to create a looping presentation within PowerPoint that is sure to captivate your audience.

Well, you can! In this article, we’re going to walk you through the steps of creating your own looping presentation, from understanding what a looping presentation is to setting the slide show to loop.

We’ll also provide some helpful tips and troubleshooting advice so you can make a successful loop and achieve the presentation of your dreams.

Let’s get started!

Table of Contents

Short Answer

To make a PowerPoint loop, start by creating the presentation you want to loop.

Then go to the “Transitions” tab, and check the box next to “On Mouse Click” and select “Loop Until Stopped”.

Finally, save your presentation and you should be able to play it in a continuous loop.

What is a Looping Presentation?

A looping presentation in PowerPoint is a great way to capture and keep viewers engaged and entertained.

This type of presentation allows you to create a continuous cycle of animations that play one after the other.

Its an effective way to deliver information in an efficient and engaging way.

Looping presentations can be used for a variety of purposes, such as to educate, explain processes, or just to entertain.

For example, if youre creating a presentation about a process, like how to make a cup of tea, you can use looping to walk viewers through each step.

When viewers reach the end of the cycle, they can simply start from the beginning and watch the entire process again.

In addition, looping presentations can be used to create a sense of atmosphere.

For example, if youre creating a presentation about a beach, you can use looping to show a continuous cycle of images of the beach.

This can help create an immersive experience for viewers, and help keep their attention on your presentation.

Finally, looping presentations can also be used to create a visual aid while someone is speaking.

For example, if youre giving a presentation about the history of a certain city, you can use looping to show a continuous cycle of images related to that citys history.

This will help viewers understand the information more clearly and help reinforce your message.

What Do You Need to Make a PowerPoint Loop?

To make a PowerPoint loop, you will need a few basic tools.

First, you will need a computer running Microsoft PowerPoint.

This will allow you to access the Animation Pane, which is essential for creating the looping presentation.

Additionally, you may want to have access to a few other tools, such as an image editing program or a video editing program, depending on what type of presentation you are creating.

Finally, you will need to have a basic understanding of how to use PowerPoint and how to use the Animation Pane.

Once you have all the necessary tools, you can begin creating your looping presentation.

To get started, you will need to open a new PowerPoint presentation and create a few slides with your desired content.

You can add images, text, and videos to your slides to make them more engaging.

Once you have all your content in place, you can begin creating the looping animation.

How to Use the Animation Pane

Using the Animation Pane to create a looping PowerPoint presentation is a great way to ensure that viewers stay engaged and entertained.

To make a PowerPoint loop, the first step is to access the Animation Pane in the ribbon.

This can be done by clicking the Animation tab and then selecting the Animation Pane option.

Once the Animation Pane is open, you can begin to create a sequence of animations that will loop through one after the other.

To do this, first select the object that you want to animate.

Then, click on the Add Animation drop-down menu at the top of the Animation Pane to select the animation that you want to apply to the object.

You can also preview the animation by clicking on the Play button in the Animation Pane.

To add additional animations to the sequence, select another object and repeat the steps.

When you have created the sequence of animations that you want to loop, you can adjust the timing of the animations by selecting the animation in the Animation Pane and then clicking on the Timing tab.

Here, you can set the delay and duration of the animation, and also choose whether you want it to start After Previous or With Previous.

Once you are happy with the sequence of animations, you can set the presentation to loop in the Slide Show settings.

To do this, go to the Slide Show tab and select the Set Up Slide Show option.

Then, check the box next to the Loop Until Stopped option.

This will ensure that your looping presentation will continue to play until the viewer manually stops it.

By following these simple steps, you can easily create an engaging, looping PowerPoint presentation that will keep viewers entertained.

Creating a Sequence of Animations

Creating a looping presentation in PowerPoint is a great way to keep your audience engaged and entertained.

To make a PowerPoint loop, you’ll need to use the Animation Pane to create a sequence of animations that will play one after the other.

In the Animation Pane, you can add individual animations to slides, or groups of animations that will play in succession.

Animations can be set to play when a slide is first displayed, or after a certain period of time has elapsed.

You can also set the duration of each animation, and the order in which they will play.

Adding animations to your slides gives you more control over the presentation, and makes it easier to create a loop.

For example, if you have a slide that has several different elements, you can add multiple animations to each element, and then set the animations to play in succession.

This will create a more dynamic presentation that will keep the audience engaged.

Additionally, you can use animations to control the speed and pacing of the presentation, as well as adding visual effects to the slides.

Once you have added the animations to your slides, you’ll need to set the presentation to loop in the Slide Show settings.

In the Slide Show tab, you can choose to loop the presentation continuously, or after a certain number of slides.

You can also set the presentation to restart at the beginning after it reaches the end.

With this setting enabled, your presentation will loop continuously until you manually stop it.

By following these simple steps, you can easily create an engaging, looping PowerPoint presentation.

With the Animation Pane, you can add multiple animations to each slide, and set the presentation to loop continuously.

This will allow you to create an interesting and engaging presentation that will keep your audience entertained.

Setting the Slide Show to Loop

Once you have created your sequence of animations within the Animation Pane, you will need to set the presentation to loop in the Slide Show settings.

To do this, first go to the Slide Show tab and click on the Set Up Slide Show button.

This will bring up a window with several options.

At the bottom of the window, you will see an option to Loop continuously until Esc.

Click this box to enable the looping feature.

Once you have enabled this feature, your presentation will loop continuously until you press the Escape key.

You can also set the looping feature to a specific number of times, if you would like the presentation to only play a certain number of times before stopping.

To do this, click the Loop until Stopped option in the Set Up Slide Show window.

You can then enter the number of times you would like the presentation to loop in the Loop for box.

Once you have enabled the looping feature, you can click the OK button in the Set Up Slide Show window to save your settings.

Your presentation is now set to loop continuously until you press the Escape key.

This will ensure that your audience stays engaged and entertained for the duration of your presentation.

Tips for Creating a Successful Loop

Creating a successful looping PowerPoint presentation requires planning and attention to detail. Its important to consider the flow of the presentation, as well as the timing of the animations. Here are a few tips to help you create an engaging, looping PowerPoint presentation:

1. Start with a strong introduction. Make sure to grab your audiences attention from the get-go. This could be a catchy headline, an interesting fact, or a thought-provoking quote.

2. Make sure your animations are timed correctly. If the animations are too fast or too slow, the presentation wont be as effective.

3. Limit the number of animations. Too many animations can make the presentation feel cluttered and overwhelming. Stick to the most important elements and use subtle animations to keep the presentation interesting .

4. Make sure the animations are relevant to the content. Animations should enhance the content, not distract from it.

5. Use transitions to create a seamless loop. Transitions can help create a smooth transition between slides and make the presentation feel more cohesive.

6. Test the presentation before sharing it. Make sure to view the presentation in Slide Show mode and test the looping feature to ensure that everything works as expected.

Following these tips can help you create an engaging, looping PowerPoint presentation that will keep your audience engaged and entertained.

Troubleshooting Common Issues

When it comes to troubleshooting common issues with a PowerPoint loop, there are a few tips to keep in mind.

First, make sure that the animation sequence is set up correctly.

Make sure that each animation is set to play after the previous one and that the last animation is set to loop back to the beginning.

Additionally, always double check the Slide Show settings to make sure the presentation is set to loop.

If the loop isn’t playing correctly, or if the presentation stops after the last animation, try resetting the slide show.

To do this, simply press the Slide Show button in the ribbon and then press the Escape key.

This will reset the show and should allow the loop to play correctly.

If animations aren’t playing when the slide show starts, check the timing settings.

Make sure that each animation is set to start at the beginning of the slide as this is necessary for the loop to work correctly.

Finally, if the loop isn’t working as expected, try reloading the presentation.

This usually fixes any issues with the animation sequence or slide show settings.

Final Thoughts

Creating a looping presentation in PowerPoint is a great way to keep viewers engaged and entertained.

With the steps outlined above, you can easily make a looping PowerPoint presentation by using the Animation Pane to create a sequence of animations and setting the Slide Show to loop.

Keep in mind the tips for creating a successful loop and troubleshoot any common issues you may encounter.

Now you’re all set to make an engaging and eye-catching looping PowerPoint presentation.

Go ahead and give it a try!

James Wilson

James Wilson has extensive knowledge in the information technology industry.His second love, besides dealing with computers, is smart home technology. He is continually updating information to better comprehend this problem and has a deep understanding of the apartment’s support system.

Recent Posts

Is Airtable a Public Company? Unveiling the Truth

No, Airtable is not a public company. As of now, Airtable is a private company that has raised funds from various investors but has not gone through an initial public offering (IPO) to be listed on...

How to Make Money with Airtable: Top Strategies and Success Stories

To make money with Airtable, you can offer consulting services to businesses looking to optimize their workflows through the platform. You can also create and sell templates or automation scripts...

< Go back to Login

Forgot Password

Please enter your registered email ID. You will receive an email message with instructions on how to reset your password.

How To Loop A PowerPoint Slideshow? Detailed Guide

Microsoft PowerPoint is a popular application for creating and delivering presentations. PowerPoint has numerous options for adding flair and taking your presentations a notch higher, such as the ability to incorporate YouTube videos, GIFs, etc. If you loop your PowerPoint, every slide will display for a predetermined duration. After the presentation, it will automatically resume from the beginning.

But the question is, can you use the looping function effectively? When used correctly, this feature eliminates the need for presenters to click a mouse or computer key to transition between slides. This feature is easy to set up and customize.

Today’s guide will teach us how to loop a PowerPoint slideshow and various tips and tricks for effective looping.

Why You Need to Loop Your Slideshow in PowerPoint?

Before learning how to loop a PowerPoint slideshow, let’s see under what scenarios one needs to loop their slideshow:

One helpful tool in PowerPoint that helps to guarantee a smooth and continuous presentation experience is the ability to loop your slideshow. The constant playback draws and maintains audience attention whether you present information in automated presentations, build interactive kiosks, or show information in exhibitions. Looping makes it possible to communicate information effectively and reinforce essential points for audience members who might join the presentation at different times. 

How to Make a PowerPoint Loop?

You can learn how to make a PowerPoint loop through the instructions below. You can use the loop for various events, such as trade exhibitions, information displays, or kiosks.

• Open the PowerPoint presentation that you wish to loop first.
• Go to the Slide Show Tab: The PowerPoint window has several tabs at the top. To access choices relating to presenting your slides, select the “Slide Show” tab.
• Access Setup Show: Several commands and choices are under the “Slide Show” tab. Search for the “Set Up Slide Show” button or menu item in the group labeled “Start Slide Show.” Click on it.
• Display Type: Select “Presented by a speaker (full screen).”
• Preview slides: If you want the slides to play automatically, select “Manually” or enter the desired duration for each slide’s PowerPoint presentation loop timing.
• Enable your presentation to loop indefinitely unless you manually end it by hitting the Escape (‘Esc’) key by enabling this option.
• Click OK: After adjusting these settings to store your options, click the “OK” button.
• Begin Your Loop: Your slides will be set to loop unless you manually stop it by pressing the ‘Esc’ key. To stop it, click “From Beginning” or “From Current Slide” under the “Slide Show” tab to begin your presentation.

How to Loop a PowerPoint SlideShow from Selected Slides

You can choose which slides you want to loop around in PowerPoint. Eliminating manual intervention and maintaining audience interaction can be achieved by carefully choosing which slides to show throughout the presentation. Follow these steps to learn how to loop a PowerPoint slideshow from selected slides: 

• Select the “Slide Show” option to start a loop for a particular set of slides. To initiate the loop, click the first slide in the thumbnail pane on the left.
• Click the final slide you wish to add to the loop while holding your keyboard’s “Shift” key. Next, select “Setup Show” and turn on the looping feature.
• Choose the “Custom Show” option and give it a name in the “Set Up Show” dialogue box. Navigate to the “Slide Show” menu and select “Custom Slide Show” to begin your looping presentation from the selected slides.

How to Set Up Auto-Loop for Continuous Playback

Now you know how to loop a slideshow in PowerPoint from selected slides, let us see how you can set up auto-loop for continuous playback: 

• Select the Slide Show tab.
• Press the Set Up Slide Show button. You’ll see an options window appear.
• Keep clicking Loop till you reach “Esc.”

Note: Under Show Type, select Presented by a speaker or Browsed by an individual if you want the speaker or individual to continue controlling the presentation and clicking between slides. Clicking “Browsed” at a kiosk checks the Loop until the “Esc” box appears continuously. Moreover, auto-looping may annoy your viewers if your presentation is very repetitive. Use it with discretion and only when it makes sense for your writing subject.

How to Loop A PowerPoint SlideShow Using 2007 Version (older versions).

Use these detailed instructions to loop your slides if you’re using an older version of Microsoft PowerPoint:

• Open your PowerPoint presentation on your 2007 Microsoft PowerPoint .
• Select the tab labeled Slide Show. Select the “Set Up Slide Show” option from the “Set Up” menu.
• Go to the “Show options” section and select “Loop continuously until ‘Esc'” from the dialogue box that appears. Click Ok.
• Select your initial slide from the “Slides” preview side panel. To select your final slide, press and hold Shift. 
• Select the tab labeled “Animations.” Turn off “On Mouse Click” and check the “Automatically After” box.
• The “After” box in the “Timing” panel has up and down arrows that you can use to change the time each slide appears. It will automatically loop back to the first slide when your slideshow reaches the last one.

How to Stop or Pause your Slideshow loop at any point.

Learning how to make a PowerPoint loop is of no use if you don’t know how to stop or pause your slideshow loop at any point: 

You can use simple keyboard commands to pause or stop your slideshow loop at any time during a PowerPoint presentation. You can manually stop the looping slideshow by hitting the “Esc” key (also known as the Escape key) on your keyboard. It gives presenters a simple and quick option to stop the continuous playback so they can answer queries, have conversations, or go to particular slides that are not playing continuously.

Advanced Techniques for Creating a Seamless Loop in PowerPoint

One of the techniques used for creating a seamless loop in PowerPoint is incorporating videos and GIFs. PowerPoint’s animations, transitions, and triggers can create seamless looping. Here is how:

• Select the video you imported and added to a slide.
• Open the “Animations” tab from the main menu.
• Choose “Play” from the animation gallery’s “Media” section after clicking the “ Add Animation ” button.
• On the right side of the screen, click the “Animation Pane” to open it.
• Right-click the “Play” button and choose “Timing” in the “Animation Pane.”
• Choose “Until End of Slide” or “Until Next Click” as the “Repeat” option in the “Timing” tab.
• Use Triggers to adjust the start and stop times of the video.

Tips and Tricks for Effective Slideshow Looping in PowerPoint

As you can see, creating a PowerPoint loop video couldn’t be easier. It only takes three easy steps to complete. Nonetheless, there are always specific tips you may apply to improve the appeal and attention-grabbingness of your videos.

1. Selecting the Right Video

The length and content of the video are the primary considerations when discussing the “right” video. Therefore, consider the duration of your video when creating a continuous loop.

Yes, longer videos can be more captivating, but they may add to the presentation’s file size and degrade performance. Shorter video clips, however, are less likely to affect performance and can loop more naturally. Regarding the video’s substance, make sure it supports the main idea of your presentation and is pertinent to the subject of your talk. The video aims to increase viewer comprehension and engagement without becoming overbearing or intrusive.

2. Compressing Video Files

Large videos can detract from the overall image of your presentation by making it excessively slow and challenging to share. Therefore, consider using a specialized video compression tool or the built-in PowerPoint compression feature to optimize your presentation by compressing the files. It doesn’t always imply that your presentation will look grainy. Still, it can cause a noticeable quality loss, so keep that in mind when creating the presentation in the first place.

3. Examining the Presentation

Make sure the video loops accurately and smoothly by testing it before you deliver your presentation. Go over the entire presentation, looking for any inconsistent or problematic playback. If you complete your testing on time, you can safely make all the required changes and retest it until the loop video functions as planned.

4. Looping Videos to Create Ambience and Background

You can also use videos that loop to set the mood for your presentation. For instance, a natural setting or a soft animation can produce an aesthetically pleasing and captivating ambiance. Nevertheless, the presentation’s general subject and the background clip are complementary rather than distracting.

To sum up, looping your PowerPoint slideshow is simple. PowerPoint’s “Set Up Slide Show options” allow you to program it to loop indefinitely for a predetermined number of times.

Use transitions carefully, arrange your slides in the correct order, and adhere to best practices while making your looping PowerPoint to give it a polished, professional appearance. Your looping slideshow can operate flawlessly at events without supervision with the correct settings.

How to Loop Slideshow In Powerpoint?

To loop a slideshow in PowerPoint, go to the “Slide Show” tab, select “Set Up Slide Show,” check “Loop continuously until ‘Esc’,” and click “OK.”

Can I loop specific slides within my PowerPoint presentation?

Yes, PowerPoint allows you to loop specific slides.

How do I stop or pause a looped slideshow in PowerPoint?

To interrupt a looped slideshow at any point, simply press the “Esc” key on your keyboard.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can control the timing of each slide by adjusting the slide transition settings, allowing for a tailored and dynamic looping experience.

Can SlideUpLift templates be used in looped presentations?

Yes, SlideUpLift provides PowerPoint templates that are compatible with looped presentations. These professionally designed templates can enhance the visual appeal of your slides, making your looped presentation more engaging and impactful.

Table Of Content

Related presentations.

Business Review PowerPoint Template

Business Case PowerPoint Deck Template

Project Status Review Deck Template

Related posts from the same category.

18 Mar, 2024 | SlideUpLift

How To Merge Two PowerPoint Presentations? Detailed Guide On How To Combine PowerPoints

If you work in sales, customer service, or as an independent consultant, you may need to utilize the same templates in many of your presentations. Of course, you don’t want

3 Feb, 2023 | SlideUpLift

How To Make A Graph In PowerPoint?

Do you need help communicating data effectively in your presentations?  Data visualization is an essential tool in today's world as it helps represent complex data sets in a simple and

8 Dec, 2022 | SlideUpLift

How To Use Transparency In PowerPoint?

PowerPoint's user-friendly design has made it a top choice among many, one of the key contributing factors to its immense popularity. Microsoft PowerPoint is one of the most used software

25 Jan, 2018 | SlideUpLift

How To Reduce PowerPoint File Size & Compress A PowerPoint

This PowerPoint tutorial explains how to reduce powerpoint file size. Business presentations contain a huge number of slides filled with graphics, audios, videos, etc. making it bulky and taxing on

19 Apr, 2023 | SlideUpLift

How To Add PowerPoint Borders To Your Presentation

Adding borders in PowerPoint is an essential aspect of presentation design as it helps to enhance the visual appeal of your slides. Customizing your presentation with borders can be a

16 Apr, 2020 | SlideUpLift

How To Broadcast A PowerPoint Presentation Online | PowerPoint Tutorial

In this blog, you will learn a powerful PowerPoint feature of how to remotely present a PowerPoint online. In today's time, countless people need to work from home and maintain

19 Aug, 2020 | SlideUpLift

How To Add Speaker Notes in PowerPoint

Are you tired of fumbling through your PowerPoint presentations, struggling to remember every single point you wanted to make? Or are you concerned you'll forget a crucial detail during a

How To Add Annotations In PowerPoint | How To Add Comments In PowerPoint

This PowerPoint tutorial explains how to add annotations in PowerPoint in simple steps. Often presentations are used in business discussions and interactive sessions. During the discussion, you might need to

26 Dec, 2022 | SlideUpLift

How to make a table in PowerPoint?

Tables are an essential element of any presentation, as they allow you to organize and present data in a clear and concise manner. Whether you're creating a business presentation, a

17 Jan, 2023 | SlideUpLift

How to Share PowerPoint Presentations on Microsoft Teams?

In today's digital age, remote work and virtual meetings have become the norm. As a result, knowing how to communicate effectively and collaborate with your team, regardless of location, is

Related Tags And Categories

Forgot Password?

Privacy Overview

Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information

Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.

How to: Effortlessly Create PowerPoint Looping Presentations

Looping presentations in PowerPoint can be a game-changer for those needing to display information continuously. It’s a straightforward process: Set up your slides, head to the ‘Slide Show’ tab, click on ‘Set Up Slide Show’, tick the ‘Loop continuously until ‘Esc” box, and voila – your presentation is set to loop.

After completing this action, your PowerPoint presentation will automatically replay from the beginning once it reaches the end. This is particularly useful for presentations displayed at kiosks, trade shows, or in waiting areas, ensuring your audience doesn’t miss any content.

Introduction

Ever been to a trade show and noticed how some booths have screens with presentations that seem to run endlessly? That’s the magic of looping presentations, a feature that’s built into PowerPoint but not always used to its fullest potential.

Having a presentation loop can serve multiple purposes. For those in marketing, it means your message is continually being broadcast without the need for manual intervention. For educators, it could mean students have more time to absorb information. And for those in the corporate world, it ensures that important data is consistently on display for stakeholders and team members to see.

Looping presentations are not only efficient but also incredibly simple to set up in PowerPoint. Knowing how to do this is a great skill to have in your back pocket. Whether you’re prepping for an exhibition, setting up a self-running informational display, or just want to make sure your audience can see your presentation in its entirety, no matter when they walk in the room – this article is for you.

PowerPoint Looping Presentations Tutorial

Before diving into the steps, it’s important to understand what we’re aiming to achieve. By the end of this tutorial, your PowerPoint presentation will be capable of running on its own, looping endlessly until manually stopped. It’s an excellent way to keep an audience engaged with your content, even if you’re not actively presenting.

Step 1: Open your PowerPoint presentation

Open the PowerPoint presentation you wish to loop.

When you have your presentation open, you’ll want to ensure that all your slides are in the correct order and that any timings, animations, or transitions are set up as you want them. This is crucial because once the presentation starts looping, these aspects will play over and over again.

Step 2: Click on the ‘Slide Show’ tab

Navigate to the ‘Slide Show’ tab located on the ribbon at the top of PowerPoint.

The ‘Slide Show’ tab is where you’ll find all the settings related to the presentation’s display. It’s your control center for how the presentation will run.

Step 3: Select ‘Set Up Slide Show’

Click on the ‘Set Up Slide Show’ button within the ‘Slide Show’ tab.

This action opens a new window with various options for running your presentation. It’s like the backstage area before a performance, where you make all the necessary tweaks.

Step 4: Choose ‘Loop continuously until ‘Esc”

In the ‘Set Up Show’ window, check the box that says ‘Loop continuously until ‘Esc”.

This is the setting that transforms your presentation from a one-time run-through to an endlessly looping display. It’s the crucial step in ensuring your content gets maximum exposure.

Step 5: Save your settings

Click ‘OK’ to save your settings and close the ‘Set Up Show’ window.

Once you’ve clicked ‘OK’, your presentation is all set to loop. You can start the slideshow to test it out and see your handiwork in action.

Continuous Display

By looping your PowerPoint presentation, you ensure that no matter when someone walks by or starts watching, they’ll be able to see the whole thing. It’s ideal for environments where you have a rotating audience, like at conferences or informational booths.

Time-Saving

Once set up, you don’t need to stick around to restart the presentation. It loops automatically, freeing you up to do other things – like interacting with your audience or managing other aspects of your event or meeting.

Professionalism

A self-running, looping presentation can make a statement about your professionalism. It shows that you’ve put thought into how your information is presented and that you’re adept at using technology to enhance your message.

Can be Ignored

When people know a presentation is looping, they might not give it their full attention, thinking they’ll catch the next round. This could mean your message isn’t hitting home as strongly as you’d like.

Technical Issues

Technology isn’t foolproof. If your PowerPoint or the device it’s running on experiences issues, your looping presentation could grind to a halt – often at the most inopportune times.

Repetitiveness

For those who are around for a while, a looping presentation can become like that one song on the radio that’s played too often – annoying. Finding the balance between informative and overkill is key.

Additional Information

PowerPoint’s looping feature might seem simple, but it can be incredibly powerful when used correctly. Think about the last time you walked past a looping video or presentation – it probably caught your eye, at least for a moment. That’s the draw of a looping display; it’s always there, always ready to catch the attention of someone new.

One tip is to ensure your presentation is designed with looping in mind. This means avoiding content that could become quickly dated or using language that implies the presentation is a one-time event. Instead, use evergreen content that will be relevant no matter how many times it’s viewed.

Another consideration is the length of your presentation. If it’s too long, viewers might not stick around for the whole loop, missing out on key information. If it’s too short, it could become annoyingly repetitive. Striking the right balance is essential.

When setting up your looping presentation, think about the context in which it will be viewed. Is it in a noisy trade show hall? Consider adding subtitles or visual cues that can be understood without sound. Is it in a quiet waiting area? Maybe a softer, less attention-grabbing approach is needed.

Remember, the goal of a PowerPoint looping presentation is to inform and engage, not to overwhelm or annoy. Keep your audience’s experience in mind, and you’ll be sure to create a looping presentation that adds value and captures interest.

• Open your PowerPoint presentation.
• Click on the ‘Slide Show’ tab.
• Select ‘Set Up Slide Show’.
• Choose ‘Loop continuously until ‘Esc”.
• Save your settings.

Frequently Asked Questions

What if my presentation has videos.

If your presentation contains videos, make sure they’re set to play automatically and check the box ‘Rewind after playing’ to ensure they loop with the rest of the slides.

Can I loop just one section of my presentation?

Yes, you can loop specific sections by using custom shows within PowerPoint. It’s a bit more complex but entirely possible.

Will looping work if I have transition timings set up?

Absolutely. Your slides will transition according to the timings you’ve set, looping back to the beginning when they reach the end.

How do I stop a looping presentation?

Simply press the ‘Esc’ key, and the presentation will stop looping and exit the slideshow view.

Can I loop a presentation on a Mac?

Yes, the steps are the same for PowerPoint on a Mac as they are for Windows.

Mastering PowerPoint looping presentations is like unlocking a new level in your presentation skills. It’s not just about making your slides look pretty; it’s about ensuring your message is always out there, always engaging, and always ready to inform. Whether you’re in the boardroom, at a booth, or in an educational setting, a well-crafted looping PowerPoint can make all the difference.

So go ahead, give it a try – your audience will thank you for it. And remember, the best presentations are those that not only deliver information but do so in a way that’s seamless and ever-present, just like the perfect loop.

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Read his full bio here.

Share this:

Join our free newsletter.

Featured guides and deals

You may opt out at any time. Read our Privacy Policy

Related posts:

• How to Loop a Slideshow on Powerpoint 2013
• How to Set Time for Slides in Powerpoint
• How to Save Powerpoint as PDF with Notes
• Can I Convert My Powerpoint to Google Slides?
• How to Add Page Numbers in Powerpoint 2010
• How to Unhide a Slide in Powerpoint 2013
• How to Make a Powerpoint Slide Vertical in Powerpoint 2013
• How to Delete a Slide in Powerpoint 2010
• How to Hide a Slide in Powerpoint 2010
• How to Rotate a Slide in PowerPoint: A Step-by-Step Guide
• How to Loop a Powerpoint Presentation in Powerpoint 2013
• How to Insert Slides from Another Presentation in Powerpoint 2010
• How to End Powerpoint on Last Slide in Powerpoint 2010
• How to Change the Font on All Slides in Google Slides
• How to Delete Multiple Slides in Google Slides
• How to Change Line Spacing in Powerpoint for Every Slide at Once
• How to Insert Check Mark in Powerpoint for Office 365
• How to Change Hyperlink Color in Powerpoint 2010 (An Easy 5 Step Guide)
• What Are Benefits of PowerPoint? A Comprehensive Guide
• How to Embed a GIF in PowerPoint: A Step-by-Step Guide

How to Make Your Presentations Loop in PowerPoint

You might want to make your presentations loop in PowerPoint for several reasons. Regardless of why, this guide will help.

Microsoft PowerPoint is already a useful productivity tool to deliver slideshows and presentations, but it's even more versatile than you may realize. PowerPoint offers the functionality for your presentations to loop so that the slideshow restarts right after it ends. Read on to find out how to enable this in your project and why such a feature can be immensely useful in a variety of situations.

How to Loop Your Presentations in PowerPoint

As you make your presentation the way you would like for it to be seen, setting your slideshow up to loop is relatively easy. It mainly involves changing a single setting within PowerPoint.

1. Within the Ribbon at the top of the window, click Slide Show . This will take you to a menu of options for displaying and presenting your slide show.

2. Click Set Up Slide Show in the middle Set Up section. This button will open up a pop-up window of detailed, advanced settings for your presentation.

3. In the Set Up Show window, click Loop continuously until 'Esc' in the Show options section.

4. Click OK to apply the change.

5. Preview the presentation using the From Beginning or From Current Slide buttons in the Ribbon to see that the looping works.

As you might notice when you preview the slide show, enabling the setting is only half the battle. While the presentation does return to the first slide after displaying the last one, the slides don't progress on their own. If you want your slides to loop automatically, you'll need to set up transitions between each slide.

How to Automatically Loop Your PowerPoint Slides

1. Select the slide you want to apply the transition to if you haven't already.

2. Click Transitions within the Ribbon. This opens up a variety of options for adding animations when changing from one slide to the next.

3. Choose one of the transitions in the Transition to This Slide section to use with this slide. There are a variety of transition options available, from the subtle to the flashy.

While you can play with each transition to your heart's content, it's not necessarily required; you can stick with the default None option or a simple Fade if you'd like.

4. Navigate to the Timing section on the right-hand side of the Ribbon. In order to automate your loop, you'll need to specify when each slide moves to the next one.

5. Under the Advance Slide heading, click the After: checkbox to enable it.

6. Set a time (in minutes or seconds) by entering one in the text box (currently reading "00:00.00") or the arrow buttons nearby.

7. Repeat this process for the other slides you have. Alternatively, you can click Apply To All to set the current slide's transition settings across every slide in the presentation.

8. When you've applied the transitions you want, you can preview the presentation again using the From Beginning or From Current Slide buttons in the Slide Show tab of the Ribbon.

In the preview, you'll see that the slides now transition automatically, and the loop now works without any further interaction. When you need to leave the presentation, press the Esc (escape) key to return to the normal PowerPoint window.

Why Would You Want to Loop a PowerPoint Presentation?

There are a number of reasons why you'd want to run a PowerPoint presentation in a loop, and thus multiple ways this functionality is useful.

You can create a continuous carousel of photos for gatherings with family and friends or a relaxing slideshow of beaches at the end of a stressful day. You can use it to display important information, like rules or schedules, at conferences or conventions.

The integration with the regular transition timings also allows for specialized use cases where you may need to have certain slides displayed longer than others. For example, it can be used to show menu pricing at a kiosk or on a food truck or to offer some entertainment to people waiting in a long line.

Keep Your PowerPoint Presentation Skills in the Loop

Learning how to loop PowerPoint presentations is just one of the many lesser-noticed features of the widely-used tool that can take your slideshows to a new level.

Functionality like this helps keep PowerPoint a versatile, popular program built for a variety of presenting needs. Now, it's time to put these features to work for you.

• I Tried Both: Apple Watch 9 vs Fitbit Charge 6
• Best Places to Print Photos Online

Loop a PowerPoint Slide Show

• Brock University

What to Know

• In PowerPoint, go to Slide Show > Set Up Slide Show > Browsed at a Kiosk (Full Screen ) > OK .
• Set the time each slide appears on the screen by selecting Slide Show > Rehearse Timings on the first slide.
• Use Next to move to the next slide and Pause to pause recording, or type a length of time in the Slide Time box.

This article explains how to loop a PowerPoint slideshow in PowerPoint 2019, PowerPoint 2016, PowerPoint 2013, PowerPoint 2010, PowerPoint for Microsoft 365, PowerPoint 2019 for Mac, PowerPoint 2016 for Mac, and PowerPoint for Mac 2011.

How to Create a Self-Running PowerPoint Slideshow

PowerPoint slideshows are not always used by a live presenter. Slideshows set to loop continuously can run unattended in a booth or kiosk. You can even save a slideshow as a video to share.

To create a continuously looping presentation, you need to set it up and record slide timings.

To run the slideshow unattended, set timings for slide transitions and animations to run automatically.

How to Set Up the Presentation

Open the PowerPoint presentation you want to loop continuously.

Go to Slide Show .

Select Set Up Slide Show . The Set Up Show dialog box opens.

Select Browsed at a Kiosk (Full Screen) . This enables the presentation to loop continuously until the viewer presses Esc .

Select OK .

How to Rehearse and Record Timings

To ensure that your automated presentation is the right length, record timings to set the amount of time each slide appears on the screen.

PowerPoint for Mac does not have the rehearsal option. Instead, go to Transitions , choose the transition you want to use, set the duration you want, and select Apply to All .

Go to the first slide of the presentation.

Select Rehearse Timings . The slideshow starts and records the time spent on the slide. The time appears in the Slide Time box on the Recording toolbar.

Select Next on the Recording toolbar when you want to move to the next slide.

Select Pause any time you want to pause or resume recording.

Type a length of time in the Slide Time box if you want to display a slide for a specific amount of time.

Select Repeat if you want to restart the recording time for the current slide only.

Select Close when you're done recording.

You'll be asked if you want to save the new slide timings. Select Yes to save the slide timings at the end of the presentation.

If you have a microphone (built-in or external), record a voiceover on your PowerPoint presentation that plays as the slideshow loops continuously.

Get the Latest Tech News Delivered Every Day

• How to Make a Slideshow on PowerPoint
• Add Hyperlinks to PowerPoint Presentations
• Tips for Memorial PowerPoint Presentations
• Create a Wedding PowerPoint Presentation
• How to Do a Voiceover on PowerPoint
• How to Use Speaker Notes in PowerPoint
• Adding Sounds, Music or Narration to PowerPoint Slide Shows
• How to Add Music to PowerPoint
• How to Add Audio to PowerPoint
• Different Ways to View Slides in PowerPoint
• Resuming Your PowerPoint Show After a Pause
• Use Keyboard Shortcuts to Speed up PowerPoint Presentations
• How to Change a Black-and-White Picture to Color in PowerPoint
• Add, Delete or Change the Order of PowerPoint Slides
• Make the Most of PowerPoint's Slide Transition Options
• How to Print PowerPoint Slides

• Start the presentation and see your notes in Presenter view Article
• Add speaker notes to your slides Article
• Rehearse and time the delivery of a presentation Article
• Record a slide show with narration and slide timings Article
• Print your PowerPoint slides, handouts, or notes Article
• Create a self-running presentation Article

Create a self-running presentation

You can use a self-running presentation to run unattended in a booth or kiosk at a trade show or convention, or you can save it as a video and send it to a client.

On the Slide Show tab, select  Set Up Slide Show .

Under Show type , pick one of the following:

Presented by a speaker (full screen)  Allows the people watching your slide show to have control over when they advance the slides.

Browsed by an individual (window)  Presents your slide show in a window, where control over advancing the slides is not available to the people watching.

Browsed at a kiosk (full screen)  Loops your slide show until the person watching presses Esc.

Rehearse and record slide timings

When you choose the following show types: Presented by a speaker (full screen) or  Browsed at a kiosk (full screen) , you’ll want to rehearse and record timings for effects and slides.

On the Slide Show tab, select  Rehearse Timings .

Note:  The presentation timer begins immediately when you click Rehearse Timings .

The Rehearsal toolbar appears and the Slide Time box begins timing the presentation.

Figure: The Rehearsal toolbar

While timing your presentation, you can do one or more of the following on the Rehearsal toolbar:

To move to the next slide, click Next .

To temporarily stop recording the time, click Pause .

To restart recording the time after pausing, click Pause .

To set an exact length of time for a slide to appear, type the length of time in the Slide Time box.

To restart recording the time for the current slide, click Repeat .

After you set the time for the last slide, a message box displays the total time for the presentation and prompts you to do one of the following:

To keep the recorded slide timings, click Yes .

To discard the recorded slide timings, click No .

Slide Sorter view appears and displays the time of each slide in your presentation.

Add narration or sound

To record a narration, your computer requires a sound card and a microphone, and a microphone connector if the microphone is not a part of your computer.

On the Slide Show tab, in the Set Up group, click the arrow on the Record Slide Show button.

Select one of the following:

Start Recording from Beginning

Start Recording from Current Slide

In the Record Slide Show dialog box, select the Narrations and laser pointer check box, and if appropriate, select or deselect the Slide and animation timings check box.

Click Start Recording .

To pause the narration, in the Recording shortcut menu in Slide Show view, click Pause . And to resume your narration, click Resume Recording .

To end your slide show recording, right-click the slide, and then click End Show .

The recorded slide show timings are automatically saved and the slide show appears in Slide Sorter view with timings beneath each slide.

You can record a narration before you run a presentation, or you can record it during the presentation and include audience comments. If you do not want narration throughout your entire presentation, you can record separate sounds or comments on selected slides or objects. For more details, see Record a slide show with narration and slide timings .

Browsed by an individual (window)  Presents your slide show in a window, where control over advancing the slides is available to the people watching.

Browsed at a kiosk (full screen)  Loops your slide show until the person watching presses Esc. (Selecting this option automatically selects the Loop continuously until 'Esc'  check box and causes your slide show to run in a loop.)

A  Rehearsal toolbar appears, and the Slide Time box begins timing the presentation. The toolbar includes a timer, a pause/play button, and Repeat button

To restart recording the time after pausing, click Play .

On the view tab, you can then switch to Slide Sorter view to see the time allotted for each slide in your presentation.

Set up slide transitions

If you want a slide show to run automatically at a kiosk, you can control when and how the slides advance. To do this, you can apply the same transition to all slides in the presentation and set the transition to automatically advance after a certain time interval.

On the Transitions tab, click the transition that you want.

Do the following on the Transitions tab:

To set the amount of time that each slide is displayed, select After and enter the number of seconds you want.

To set the duration of each transition between slides, enter the amount of time in the Duration box.

Click Apply to All .

Export a presentation to video

You can export a presentation as a movie file. See Save a presentation as a movie file for more details.

Need more help?

Want more options.

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Microsoft 365 subscription benefits

Microsoft 365 training

Microsoft security

Accessibility center

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Ask the Microsoft Community

Microsoft Tech Community

Windows Insiders

Microsoft 365 Insiders

Was this information helpful?

Thank you for your feedback.

How to Loop a Powerpoint Office 365 Slideshow

For typical Powerpoint presentations that you just show to one person, you likely aren’t concerned with what happens when the slideshow is over.

But some situations call for a slideshow to continue playing for an extended period of time.

This means that you will need to learn how to loop a Powerpoint Office 365 presentation so that it plays continuously.

How to Do a Powerpoint for Office 365 Slideshow Loop

• Open the presentation.
• Select the Slide Show tab.
• Choose Set Up Slide Show .
• Check the Loop continuously until Esc box.
• Click the top slide, hold down Shift , then click the last slide.
• Choose the Transitions tab.
• Uncheck On Mouse Click , check After , then set a duration for each slide.

Our guide continues below with more information on how to loop a Powerpoint Office 365 presentation, including pictures of these steps.

Sometimes you will create a presentation in Powerpoint that is going to be shown someplace where it will be unattended.

This could be at a trade show, in an office, or anywhere else where there is a TV or computer screen.

Constantly having to restart that slideshow yourself is often impractical, and would be tedious even if you were physically able to attend to it.

Fortunately, it’s possible to create a slideshow loop in Powerpoint so that the presentation will play continuously once it has concluded.

Our guide below will show you how to create a Powerpoint slideshow loop in Microsoft Powerpoint for Office 365.

Documents with pictures often need some adjustments before they look their best. You can find out more with our how to flip an image in Word article .

How to Make a Powerpoint Slideshow Loop (Guide with Pictures)

The steps in this article were performed in the Microsoft Powerpoint for Office 365 version of the application, but will work in most other versions of the application as well.

Note that the presentation can loop on its own, but you may need to adjust any screensaver or hibernation settings on your computer so that the screen will remain on.

Step 1: Open your slideshow in Powerpoint.

Step 2: click the slide show tab at the top of the window..

Step 3: Click the Set Up Slide Show button.

Step 4: Check the box to the left of Loop continuously until Esc , then click OK .

Step 5: Click your first slide in the column at the left side of the window, then hold down the Shift key, scroll down and click the last slide.

Step 6: Select the Transitions tab at the top of the window.

Step 7: Click the box to the left of On Mouse Click to remove the check mark, check the box to the left of After , then choose the amount of time to display each slide.

I have set my slideshow to display each slide for 5 seconds in the image above.

You can start your slideshow at any time by pressing the F5 key on your keyboard.

You can stop the slideshow by pressing the Esc key on your keyboard.

You should now know how to loop a Powerpoint Office 365 presentation so that it continuously plays on repeat until you press the Esc key on your keyboard to terminate it.

Find out how to change your slide size in Powerpoint if you need a different orientation or slide dimensions for your presentation.

Matt Jacobs has been working as an IT consultant for small businesses since receiving his Master’s degree in 2003. While he still does some consulting work, his primary focus now is on creating technology support content for SupportYourTech.com.

His work can be found on many websites and focuses on topics such as Microsoft Office, Apple devices, Android devices, Photoshop, and more.

Share this:

• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Related Posts

• How to Rotate a Powerpoint Slide Presentation
• How to Mirror Image in PPT Files (An Easy 6 Step Guide)
• How to Change Slide Size in Powerpoint 2016
• How to Do a Powerpoint Google Slides Presentation Conversion
• How to Add a Hyperlink on Google Slides
• Can You Print a Google Slide?
• How to Make Google Slides Vertical (5 Quick Steps)
• How to Save a Picture to Your Computer from Powerpoint for Office 365
• How to Stop Hiding a Slide in Google Slides
• How to Skip a Slide in Google Slides
• How to Make Columns in Word Office 365
• How to Make Text Vertical in Google Docs
• How to Set Google Docs Background Image
• Can You Download Google Slides Files?
• How to Save a Single Slide as a Picture in Google Slides
• How to Change Page Color in Word for Office 365 (An Easy 4 Step Guide)
• How to Get the Excel 365 Developer Tab in Microsoft Excel for Office Today
• How to Not Print Comments in Word (An Easy 5 Step Guide)
• How to Double Space in Word Office 365
• How to Bring an Image to the Front in Google Slides

Get Our Free Newsletter

How-to guides and tech deals

You may opt out at any time. Read our Privacy Policy

How to Create a Looping Slideshow in PowerPoint

You can easily create a looping slideshow using PowerPoint. A looping slideshow displays each slide automatically for a certain amount of time. Once that time has elapsed, the slide automatically continues to the next slide. Once the slideshow reaches the end, it repeats from the beginning.

• Open your PowerPoint presentation.
• Click the [Slide Show] tab > From the "Set Up" group, click "Set Up Slide Show".
• From the resulting dialogue box, check "Loop continuously until 'Esc'" under the "Show options" section > Click [OK].
• From the "Slides" preview side panel, click your first slide > Press and hold [Shift] and click your last slide. This will select all of your slides.
• Click the [Transitions] tab > From the "Timing" group, uncheck "On Mouse Click" and check "After".
• To adjust the time you would like each slide to display, click the up and down arrows in the "After:" field within the "Timing" group. When your slideshow reaches the last slide, it will automatically loop back to the beginning.

Posted in Computer Help

Share This Post

How To Loop a PowerPoint: A Step-by-Step Guide

Microsoft PowerPoint is a well-known tool for making and delivering presentations. Do you know how to use the looping feature? This feature makes it easy for presenters to move from slide to slide without having to click a mouse or computer key. Setting up and customizing this feature is simple.

In this article, you will learn the following:

What is PowerPoint looping?

How to set up powerpoint looping, how to stop looping on powerpoint presentations.

Typically, a PowerPoint presentation will only move from one slide to the next when prompted. A presenter will have to press the arrow key on the computer keyboard, right-click on the mouse, or press the button on a hand-held presentation remote in order to move to the next slide.

When you loop a PowerPoint, you set the presentation to move from one slide to the next without being prompted. For presenters, this means that you do not need to click the arrow key on the computer or click a mouse.

PowerPoint looping allows you to display each slide automatically for a certain amount of time, which you determine. Once the slide displays for that set time, the next slide automatically displays. After the final slide of the presentation, the slideshow repeats from the beginning.

To set up looping on a PowerPoint presentation, complete the following steps:

Create your PowerPoint presentation.

In the main menu of your PowerPoint (along the top of the screen), select “Slide Show.”

Click “Slide Show” to begin customizing your presentation’s display

In the menu that pops up at the top of your screen, select “Set Up Slide Show.”

Click “Set Up Slide Show” to begin customizing your presentation’s display

In the box that appears, locate “Show options” and check the box next to “Loop continuously until ‘Esc.’”

Check the box next to “Loop continuously until ‘Esc.’”

Click “OK.”

Setting up timing between slides

Microsoft PPT will automatically set your slides to transition every two minutes, but you can easily customize how long you want each slide to display before moving to the next slide.

In the main menu, select “Transitions.”

Click “Transitions”

Select the slide that you want to customize for the display time. If you would like all of the slides to have the same transition time, select all slides instead of just one.

Select the slide for which you want to customize the display time. If you’d like all of the slides to have the same transition time, highlight all slides instead of just one.

In the “Timing” group under “Advance Slide,” check the box next to “After:.”

Under “Advance Slide,” check the box next to “After:”

In the box next to “After:,” move the arrows up and down to determine how long you’d like the slides to display.

Once you loop your slideshow, it will display on a loop while you present. To stop this looping, simply press “Esc” on your keyboard. This will end your presentation looping.

Enhancing PowerPoint with graphics

Microsoft PowerPoint is just the beginning when it comes to creating useful presentations. If you would like to enhance the visual aspects of your PowerPoint presentations, consider add-on software that will help create graphics such as timelines, Gantt charts, and more.

Disclaimer:

The steps to loop a PowerPoint were researched in November 2021, and desktop screenshots reflect the platform layout of PowerPoint on a desktop PC. Applications and layouts are liable to change; see Microsoft’s “PowerPoint help & learning” page for additional information.

TechRepublic

Account information.

Share with Your Friends

How to add a looping introduction to a PowerPoint presentation

Your email has been sent

Displaying an introductory or welcome slide while your audience arrives for a presentation is common. While the audience enters the room and finds a seat, they may chat with one another, help themselves to refreshments, or sit quietly and wait for the show. The one-slide introduction that says welcome and displays pretty flowers is quaint, but it won’t grab anyone’s attention as they enter the room, and it certainly won’t keep anyone’s interest while they wait. Instead, grab their attention from the moment they walk through the door with an introductory presentation that introduces you and/or your presentation’s purpose—call it a mini presentation if you like. That way, you’ll have the attention and interest of your audience before you even begin.

I’m using Office 365 PowerPoint (desktop) on a Windows 10 64-bit system, but you can use an earlier version. This technique can’t be created in the browser edition. You can work with your own presentation or download the .pptx and .ppt demonstration files.

SEE: Choosing your Windows 7 exit strategy: Four options (Tech Pro Research)

Setting it up

This technique uses two shows—the preview and the main presentation–but you’ll store them as one. You control when your audience sees both.

It doesn’t matter where you place the introductory slides within the main presentation. At the beginning makes sense—that’s what we’ll do–but it isn’t necessary. If slide numbering matters, place your introductory slide as the end. Use as many introductory slides as needed but keep it to a minimum. The point is to present material that will interest the audience and enhance your program.

Once you’ve created the main presentation, add introductory slides. Your presentation, if run, would display the introductory slides and then the presentation. That’s not what you want; you want the presentation to repeat the introductory slides without advancing to the main presentation until you’re ready.

I’m using the school project presentation provided by PowerPoint as a demonstration file. As you can see in Figure A , I’ve changed the first two slides a bit; these two slides, slides 1 and 2, represent our introduction. Slides 3 through 7 represent our main presentation. (I’ve not changed the remaining slides.)

Identifying the introduction slides

We now have two presentations in one. To control them as two separate shows, we’ll first identify the introductory slides. To do so:

• In Slide Sorter, select the slides in the introduction—slides 1 and 2. To do so, hold down the Shift key while clicking both.
• Click the Transition slide. In the Timing group, uncheck On mouse click, and click After. Enter the number of seconds you want to pause between slides—3 ( Figure B ).
• Click the Slide Show tab, and then click Set Up Slide Show in the Set Up group.
• In the resulting dialog, check Loop continuously until ‘Esc’ in the Show options section.
• In the Show slides section, enter 1 and 2 for the From and To settings (slides 1 and 2).
• Make sure to check the Using timings, if present option in the Advance slides section ( Figure C ) and click OK.

If you play the presentation as is, it plays slides 1 and 2 continuously, never advancing to the main presentation. Next, we’ll create a custom slide show with the remaining slides.

Name the main presentation

We’ve identified slides 1 and 2 as the introduction. Now, let’s identify the main presentation by create a custom slide show as follows:

• Click the slide Show tab, click Custom Slide Show in the Start Slide Show group, and then choose custom Shows.
• Click New in the resulting dialog.
• In the Define Custom Show dialog, enter Main Presentation in the Slide show name control.
• Check slides 3, 4, 5, 6, and 7 in the left list. Then, click Add to copy those slides to the Slides in custom show list to the right ( Figure D ). PowerPoint will renumber them, but don’t worry about that.
• Click OK and then click Close.

At this point, you have two slides that loop, slides 1 and 2, and a custom slide show named Main Presentation that contains 5 slides (slides 3 through 7). Right now, you can’t get from the looping intro to the main presentation.

How to start the main presentation

Once your audience is ready, you’ll want to start the main presentation. As yet, there’s no way to do so. To that end, we’ll add an action button to slide 2 that starts the main presentation. First, switch to Normal view. Then, select the last slide in the introduction, slide 2. To add the action button, do the following:

• Click the Insert tab, click Shapes (in the Illustrations group), and then choose a shape from the Action Buttons at the bottom of the dropdown. Specifically, choose the second from the left, Go Forward or Next.
• Click on the slide where you want to position the button.
• In the resulting dialog, you’ll assign an action by choosing Custom Show from the Hyperlink to dropdown ( Figure E ). Don’t choose Next Slide, even though it seems to make sense. Doing so will display the next slide in the introduction—slide 1—not the next slide in sequence.
• In the next dialog, choose Main Presentation ( Figure F ).
• Click OK twice to return to Normal view.

At this point, you’re done. However, you might want to make the action button invisible as follows:

• With the action button still selected, click the Format tab. Then click the dialog launcher for the Shapes Styles group.
• In the resulting pane, click Fill to display more options. Set the Transparency option to 100%.

That was easy, wasn’t it? Just don’t forget where the action button is. You can copy the button to slide 1 if you want the option of starting the presentation from either introductory slide. This is less important when you have only a few slides in the introduction. If you have several, consider copying the action button to all the slides or every other slide so you can quickly start the presentation regardless of which slide is up.

Show’s on!

All the hard work is done. Simply press F5 to run the show. PowerPoint will loop through slides 1 and 2. When you’re ready to start the presentation, click the (hidden) action button on slide 2. Because the action button specifies a custom show and not a specific slide, PowerPoint will return to the first slide in that show, slide 3 (slide 1 in the custom show) when you exit the last slide, slide 7. It won’t return to slides 1 and 2 in the introduction.

You can keep your audience mildly entertained or grab their interest early on with a short introductory presentation. Let the slides loop until you’re ready to begin the main presentation.

Send me your question about Office

I answer readers’ questions when I can, but there’s no guarantee. Don’t send files unless requested; initial requests for help that arrive with attached files will be deleted unread. You can send screenshots of your data to help clarify your question. When contacting me, be as specific as possible. For example, “Please troubleshoot my workbook and fix what’s wrong” probably won’t get a response, but “Can you tell me why this formula isn’t returning the expected results?” might. Please mention the app and version that you’re using. I’m not reimbursed by TechRepublic for my time or expertise when helping readers, nor do I ask for a fee from readers I help. You can contact me at [email protected] .

• How to use an image to tell a story in PowerPoint (TechRepublic)
• Office Q&amp;A: Collapsible heading and delay send settings aren’t a cure all, but it’s close
• 10 free alternatives to Microsoft Word and Excel (TechRepublic download)
• Microsoft Office 365 for business: Everything you need to know (ZDNet)
• The 10 most important iPhone apps of all time (Download.com)
• It takes work to keep your data private online. These apps can help (CNET)
• Programming languages and developer career resources coverage (TechRepublic on Flipboard)

Subscribe to the Developer Insider Newsletter

From the hottest programming languages to commentary on the Linux OS, get the developer and open source news and tips you need to know. Delivered Tuesdays and Thursdays

Create a TechRepublic Account

Get the web's best business technology news, tutorials, reviews, trends, and analysis—in your inbox. Let's start with the basics.

* - indicates required fields

Sign in to TechRepublic

Lost your password? Request a new password

Reset Password

Please enter your email adress. You will receive an email message with instructions on how to reset your password.

Check your email for a password reset link. If you didn't receive an email don't forgot to check your spam folder, otherwise contact support .

Welcome. Tell us a little bit about you.

This will help us provide you with customized content.

Want to receive more TechRepublic news?

You're all set.

Thanks for signing up! Keep an eye out for a confirmation email from our team. To ensure any newsletters you subscribed to hit your inbox, make sure to add [email protected] to your contacts list.

How to Continue a Slide in PowerPoint: A Step-by-Step Guide

• Recent Posts
• How to Add Bullet Points in PowerPoint: A Step-by-Step Guide - May 25, 2024
• Where is Slide Master in PowerPoint: A Comprehensive Guide for Beginners - May 25, 2024
• How to Use Copilot in PowerPoint: A Step-by-Step Guide - May 25, 2024

Continuing a slide in PowerPoint is a simple yet essential task for creating a professional and engaging presentation. Whether you’re designing a presentation for a business meeting, a school project, or any other purpose, it’s important to know how to continue a slide seamlessly to avoid confusing your audience.

In my personal experience, I’ve found that using the same slide title on multiple slides can be confusing for the audience. They may wonder why the slide title has not changed, even though the rest of the content has changed. Therefore, it’s better to avoid using the same slide title in multiple slides. Instead, you can use the second option, which is to add “(continued)” to the slide title. This option is much clearer and easier for the audience to understand.

To continue a slide in PowerPoint, you have several options to choose from. One option is to split the body text between two slides, which can be done by selecting the text and clicking the “Enter” key. PowerPoint will automatically create a new slide with the same title as the current slide and divide the text approximately evenly between the two slides. Another option is to continue on a new slide, which can be done by creating a new slide with the same title as the current slide and then switching to it to continue typing the text you want to add.

JUMP TO TOPIC

Configuring Slide Options

Using the set up show dialog box, applying transitions and animations, incorporating multimedia elements, looping and timing slides, controlling the slide show flow, adapting to your audience and venue, setting up your slide show.

When it comes to creating a PowerPoint presentation, it’s essential to ensure that the slides are set up correctly to achieve the desired result. This section will cover the necessary steps to set up your slide show in PowerPoint.

The first step in setting up your slide show is to configure the slide options. This can be done by going to the “Slide Show” tab and selecting “Set Up Slide Show.” Here, you will find several options that can be configured to your preference.

One of the most critical options is the “Loop continuously until ‘Esc'” option. This option ensures that your slide show will continue to play in a loop until the user presses the “Esc” key. To enable this option, simply tick the checkbox next to it.

Another way to configure your slide show is by using the “Set Up Show” dialog box. This dialog box can be accessed by clicking the “Set Up Show” button in the “Slide Show” tab.

In the “Set Up Show” dialog box, you will find several options that can be configured, such as the slide show type, the starting slide, and the slide show monitor. You can also choose to rehearse timings, which will help you determine how long each slide should be displayed.

If you want to record your slide show, you can use the “Record Slide Show” option. This option allows you to record your slide show and add narration, timings, and laser pointer gestures.

Another option is the “Record Timings” option, which allows you to record the time spent on each slide. To use this option, simply click on the “Slide Time Box” and enter the time you want to spend on each slide.

Once you’re ready to start recording, click the “Start Recording” button. If you need to pause or stop recording, you can use the “Pause Recording” or “Stop Recording” buttons, respectively. You can also resume recording by clicking the “Resume Recording” button.

In conclusion, setting up your slide show in PowerPoint is a crucial step in creating an effective presentation. By configuring the slide options and using the “Set Up Show” dialog box, you can ensure that your slide show is set up correctly and ready to be presented.

Enhancing Presentations with Media and Transitions

When it comes to creating engaging presentations, incorporating multimedia elements and applying transitions and animations can make a significant difference. In this section, I will discuss how to use transitions and multimedia elements to enhance your PowerPoint presentations.

Transitions and animations are essential tools in creating engaging presentations. Adding transitions between slides can make your presentation more fluid and professional-looking. You can add transition effects to all slides at once or apply them to individual slides. To apply transitions to all slides, click the “Transitions” tab, select the transition you want to apply, and click “Apply to All.”

You can also customize the transition effect by clicking on “Effect Options.” This will open a dialog box where you can adjust the duration, direction, and other settings for the transition effect.

Animations can also add visual interest to your presentation. To add animation to an object, click on the object, go to the “Animations” tab, and select the animation you want to apply. You can also adjust the animation effect by clicking on “Effect Options” and customizing the settings.

Adding multimedia elements such as images and videos can make your presentation more engaging. To add an image, click on the slide where you want to add the image, go to the “Insert” tab, and click on “Pictures.” Select the image you want to add and click “Insert.” You can also adjust the size and position of the image by dragging it to the desired location.

Embedding a YouTube video is also a great way to incorporate multimedia elements into your presentation. To embed a YouTube video, go to the slide where you want to add the video, click on the “Insert” tab, and select “Video.” From there, select “Online Video” and enter the URL of the YouTube video you want to embed.

In conclusion, incorporating multimedia elements and applying transitions and animations can make your PowerPoint presentation more engaging and professional-looking. By following the steps outlined in this section, you can create a presentation that will capture your audience’s attention and keep them engaged throughout.

Running a Seamless Slide Show

As a presenter, I always strive to make my slide shows as seamless as possible. Here are a few tips that I have learned over the years to make sure that my presentations run smoothly.

If you want your slides to keep looping continuously until you press the “Esc” key, you can set up your slide show to do so. To do this, go to the “Slide Show” tab and select “Set Up Slide Show.” In the “Show options” group, check the “Loop continuously until ‘Esc'” option and click “OK” to apply the new setup. This is particularly useful if you are presenting at a kiosk or if your presentation will be browsed at a kiosk (full screen).

Another important aspect of creating a seamless slide show is to set the timing of your slides. In the “Timing” group, you can select the duration of each slide and choose whether to advance slides on mouse click or after a set duration. You can also apply these timings to all slides by clicking “Apply to All.” This is a great way to control the flow of your slide show and ensure that your audience stays engaged.

In addition to looping and timing your slides, you can also control the flow of your slide show by using narration and pausing. If you want to add narration to your slide show, simply go to the “Slide Show” tab and select “Record Slide Show.” From there, you can record your narration and set timings for each slide. This is a great way to add a personal touch to your presentation and keep your audience engaged.

If you need to pause your slide show for any reason, you can do so by pressing the “Pause” key on your keyboard. This will pause the slide show and allow you to take a break or answer any questions from your audience. To resume the slide show, simply press the “Pause” key again.

By following these tips and tricks, you can create a seamless slide show that will keep your audience engaged and interested throughout your presentation. Remember to practice your slide show beforehand and make any necessary adjustments to ensure that everything runs smoothly.

Tips for Different Presentation Environments

When presenting with PowerPoint, it is essential to consider your audience and the venue where you will be presenting. These factors can significantly impact how you deliver your presentation and how you should design your slides.

Presented by a Speaker

If you are presenting in front of an audience, it is essential to make sure that your slides are easy to read from a distance. Use a simple font style, such as Arial or Calibri, and choose a font size that your audience can read from the back of the room. It is also crucial to use high-quality images and graphics that can be seen clearly.

When presenting, use a microphone to ensure that your voice is heard clearly. Additionally, consider using speaker notes to help guide your presentation and keep you on track.

Presented by a Speaker (Full Screen)

If your presentation is being shown full screen, it is essential to design your slides with this in mind. Use high-quality images and graphics that will look good when displayed on a larger screen. Also, make sure that your font size is large enough to be read from a distance.

Browsed by an Individual

If your presentation will be browsed by an individual, it is essential to make sure that your slides are easy to navigate. Use clear headings and subheadings to help guide the reader, and consider using hyperlinks to make it easy to jump between slides.

Browsed by an Individual (Window)

If your presentation will be browsed in a window, it is essential to consider the size of the window. Make sure that your slides are designed to fit within the window without the need for scrolling. Additionally, consider using animations and transitions to make your presentation more engaging.

If your presentation will be unattended, it is essential to make sure that your slides are self-explanatory. Use clear headings and subheadings to help guide the reader, and consider using animations and transitions to make your presentation more engaging.

If your presentation will be shown at a booth, it is essential to make sure that your slides are eye-catching and engaging. Use high-quality images and graphics to draw people in, and consider using animations and transitions to make your presentation more dynamic.

If you are presenting at a wedding, it is essential to make sure that your slides are elegant and tasteful. Use a simple, classic font style, and choose images and graphics that are appropriate for the occasion.

Trade Shows

If you are presenting at a trade show, it is essential to make sure that your slides are eye-catching and informative. Use high-quality images and graphics to draw people in, and consider using animations and transitions to make your presentation more dynamic.

Regardless of the presentation environment, it is essential to use a microphone to ensure that your voice is heard clearly. Make sure that the microphone is set up correctly and that you know how to use it before you start your presentation.

When creating your presentation, it is essential to consider whether it will be presented on a PC or a Mac. Make sure that your presentation is compatible with the operating system that will be used.

Copy/Same Title

If you will be presenting multiple times, it is essential to make sure that each copy of your presentation has a unique title. This will help to avoid confusion and ensure that the correct version of your presentation is being used.

Abbreviations

When using abbreviations in your presentation, make sure that they are clear and easy to understand. Avoid using obscure abbreviations that may be unfamiliar to your audience.

• Use a simple font style and choose a font size that your audience can read from a distance.
• Use high-quality images and graphics to draw people in.
• Consider using animations and transitions to make your presentation more engaging.
• Use speaker notes to help guide your presentation.
• Use a microphone to ensure that your voice is heard clearly.
• Make sure that your slides are easy to navigate.
• Use clear headings and subheadings to help guide the reader.

Related posts:

• Maximum Number of Slides in PowerPoint: What You Need to Know
• How to Connect Shapes in PowerPoint: A Step-by-Step Guide
• Free Online Solution to Repair Damaged PowerPoint Files
• How to Collaborate on PowerPoint Presentations: Tips and Tricks
• Exporting Your Worksheet to PowerPoint: What Gets Exported?
• PowerPoint Chart Creation: The First Step
• Export Gantt Chart from MS Project to PowerPoint: A Step-by-Step Guide
• Add a Slide to an Existing PowerPoint Presentation: A Step-by-Step Guide
• Locating the Present Button on PowerPoint: A Tech Guide
• What is the Latest Version of PowerPoint? A Comprehensive Guide for Computer Users
• How to Write Equations in PowerPoint: A Step-by-Step Guide for Techies
• How to Easily Find Online Templates in PowerPoint

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

How to Loop a Video in PowerPoint and Play Endlessly

Looping is useful to keep a video playing endlessly without having the presenter replay the video manually. This technique is popular among short videos and GIF-like content.

You could edit the video and make it look like looping using a mainstream video editor, but that method sounds exhausting, and not many people can afford to use the software. Instead, PowerPoint enables you to loop a running video with a single click .

In this guide, you will learn how to loop a video in PowerPoint. I will assume you already know how to insert a video into a presentation slide beforehand.

Guide to Looping Videos in PowerPoint

1. Launch a PowerPoint document with a video already inserted.

2. Select the video and go to the Playback menu.

3. Tick the box of Loop until Stopped .

4. To test the result, run the Slideshow (F5) .

The video will keep playing and looping unless you pause it or move to another slide — it’s a smart mechanism to preserve computing power and ensure the best performance even with multiple videos within a slide.

Tips for Smooth, Seamless Video Loops

To prevent jarring jumps between loop cycles, properly editing the video source file is key:

• Edit video:  Use video editing software to trim and adjust the clip so the loop point transitions flawlessly.
• Shorter is better:  Looping shorter videos will have better performance. Long videos may lag and delay.
• Use animations:  PowerPoint animations give more looping options than just the video settings.
• Test thoroughly:  Preview the looped video in Presenter View to verify smooth playback.

With the right techniques, looping videos can be an easy way to enhance engagement and visual interest in your PowerPoint presentations. The endless repeat creates an immersive, mesmerizing effect that grabs attention.

Adding looping videos to PowerPoint is an easy way to increase engagement and visual appeal for your presentations. The endless repetition grabs attention and emphasizes your message.

Use the built-in “Loop until Stopped” option for basic looping needs, and explore animations for more customization. Edit your video source for seamless transitions between cycles. Test thoroughly before presenting.

How do you loop a video continuously in PowerPoint?

To loop a video continuously in PowerPoint, simply click on the video, go to the Playback tab under Video Tools, and check the box next to “Loop until Stopped” in the Video Options group. This will make the video repeat nonstop until you manually stop it or switch slides.

Why is my PowerPoint video not playing automatically?

If your PowerPoint video isn’t playing automatically, check the Playback settings for that video. Click the video, go to Playback > Start and make sure it’s set to “Automatically” rather than “On Click.” Also, check that “Hide While Not Playing” is unchecked. If it still doesn’t work, try optimizing media compatibility under File > Info.

Is there a maximum length video I can loop in PowerPoint?

There’s no explicit max length, but longer videos are more likely to have performance issues. Keep looping videos under 30-60 seconds for best results. Use shorter clips if possible.

About The Author

Related posts.

How to Build a Mind Map in Microsoft PowerPoint

How to Duplicate a Slide in PowerPoint

How to Convert XML to PowerPoint PPT in 5 Steps

How to Indent and Align Bullet Points in PowerPoint

1 thought on “how to loop a video in powerpoint and play endlessly”.

Thank you so much vegaslide! you’re an angel!

Comments are closed.

Got any suggestions?

We want to hear from you! Send us a message and help improve Slidesgo

Top searches

Trending searches

memorial day

12 templates

151 templates

15 templates

11 templates

39 templates

christian church

29 templates

Education Major for College: Learning Situation

It seems that you like this template, education major for college: learning situation presentation, free google slides theme and powerpoint template.

Download the Education Major for College: Learning Situation presentation for PowerPoint or Google Slides. As university curricula increasingly incorporate digital tools and platforms, this template has been designed to integrate with presentation software, online learning management systems, or referencing software, enhancing the overall efficiency and effectiveness of student work. Edit this Google Slides theme and PowerPoint template to create an accessible and highly professional resource that aligns with the rigorous academic expectations at the higher education level.

Features of this template

• 100% editable and easy to modify
• Different slides to impress your audience
• Contains easy-to-edit graphics such as graphs, maps, tables, timelines and mockups
• Includes 500+ icons and Flaticon’s extension for customizing your slides
• Designed to be used in Google Slides and Microsoft PowerPoint
• Includes information about fonts, colors, and credits of the resources used

How can I use the template?

Am I free to use the templates?

How to attribute?

Attribution required If you are a free user, you must attribute Slidesgo by keeping the slide where the credits appear. How to attribute?

Related posts on our blog.

How to Add, Duplicate, Move, Delete or Hide Slides in Google Slides

How to Change Layouts in PowerPoint

How to Change the Slide Size in Google Slides

Related presentations.

Premium template

Unlock this template and gain unlimited access

How To Get Free Access To Microsoft PowerPoint

E very time you need to present an overview of a plan or a report to a whole room of people, chances are you turn to Microsoft PowerPoint. And who doesn't? It's popular for its wide array of features that make creating effective presentations a walk in the park. PowerPoint comes with a host of keyboard shortcuts for easy navigation, subtitles and video recordings for your audience's benefit, and a variety of transitions, animations, and designs for better engagement.

But with these nifty features comes a hefty price tag. At the moment, the personal plan — which includes other Office apps — is at $69.99 a year. This might be the most budget-friendly option, especially if you plan to use the other Microsoft Office apps, too. Unfortunately, you can't buy PowerPoint alone, but there are a few workarounds you can use to get access to PowerPoint at no cost to you at all.

Read more: The 20 Best Mac Apps That Will Improve Your Apple Experience

Method #1: Sign Up For A Free Microsoft Account On The Office Website

Microsoft offers a web-based version of PowerPoint completely free of charge to all users. Here's how you can access it:

• Visit the Microsoft 365 page .
• If you already have a free account with Microsoft, click Sign in. Otherwise, press "Sign up for the free version of Microsoft 365" to create a new account at no cost.
• On the Office home page, select PowerPoint from the side panel on the left.
• Click on "Blank presentation" to create your presentation from scratch, or pick your preferred free PowerPoint template from the options at the top (there's also a host of editable templates you can find on the Microsoft 365 Create site ).
• Create your presentation as normal. Your edits will be saved automatically to your Microsoft OneDrive as long as you're connected to the internet.

It's important to keep in mind, though, that while you're free to use this web version of PowerPoint to create your slides and edit templates, there are certain features it doesn't have that you can find on the paid version. For instance, you can access only a handful of font styles and stock elements like images, videos, icons, and stickers. Designer is also available for use on up to three presentations per month only (it's unlimited for premium subscribers). When presenting, you won't find the Present Live and Always Use Subtitles options present in the paid plans. The biggest caveat of the free version is that it won't get any newly released features, unlike its premium counterparts.

Method #2: Install Microsoft 365 (Office) To Your Windows

Don't fancy working on your presentation in a browser? If you have a Windows computer with the Office 365 apps pre-installed or downloaded from a previous Office 365 trial, you can use the Microsoft 365 (Office) app instead. Unlike the individual Microsoft apps that you need to buy from the Microsoft Store, this one is free to download and use. Here's how to get free PowerPoint on the Microsoft 365 (Office) app:

• Search for Microsoft 365 (Office) on the Microsoft Store app.
• Install and open it.
• Sign in with your Microsoft account. Alternatively, press "Create free account" if you don't have one yet.
• Click on Create on the left side panel.
• Select Presentation.
• In the PowerPoint window that opens, log in using your account.
• Press Accept on the "Free 5-day pass" section. This lets you use PowerPoint (and Word and Excel) for five days — free of charge and without having to input any payment information.
• Create your presentation as usual. As you're using the desktop version, you can access the full features of PowerPoint, including the ability to present in Teams, export the presentation as a video file, translate the slides' content to a different language, and even work offline.

The only downside of this method is the time limit. Once the five days are up, you can no longer open the PowerPoint desktop app. However, all your files will still be accessible to you. If you saved them to OneDrive, you can continue editing them on the web app. If you saved them to your computer, you can upload them to OneDrive and edit them from there.

Method #3: Download The Microsoft PowerPoint App On Your Android Or iOS Device

If you're always on the move and need the flexibility of creating and editing presentations on your Android or iOS device, you'll be glad to know that PowerPoint is free and available for offline use on your mobile phones. But — of course, there's a but — you can only access the free version if your device is under 10.1 inches. Anything bigger than that requires a premium subscription. If your phone fits the bill, then follow these steps to get free PowerPoint on your device:

• Install Microsoft PowerPoint from the App Store or Google Play Store .
• Log in using your existing Microsoft email or enter a new email address to create one if you don't already have an account.
• On the "Get Microsoft 365 Personal Plan" screen, press Skip For Now.
• If you're offered a free trial, select Try later (or enjoy the free 30-day trial if you're interested).
• To make a new presentation, tap the plus sign in the upper right corner.
• Change the "Create in" option from OneDrive - Personal to a folder on your device. This allows you to save the presentation to your local storage and make offline edits.
• Press "Set as default" to set your local folder as the default file storage location.
• Choose your template from the selection or use a blank presentation.
• Edit your presentation as needed.

Do note that PowerPoint mobile comes with some restrictions. There's no option to insert stock elements, change the slide size to a custom size, use the Designer feature, or display the presentation in Immersive Reader mode. However, you can use font styles considered premium on the web app.

Method #4: Use Your School Email Address

Office 365 Education is free for students and teachers, provided they have an email address from an eligible school. To check for your eligibility, here's what you need to do:

• Go to the Office 365 Education page .
• Type in your school email address in the empty text field.
• Press "Get Started."
• On the next screen, verify your eligibility. If you're eligible, you'll be asked to select whether you're a student or a teacher. If your school isn't recognized, however, you'll get a message telling you so.
• For those who are eligible, proceed with creating your Office 365 Education account. Make sure your school email can receive external mail, as Microsoft will send you a verification code for your account.
• Once you're done filling out the form, press "Start." This will open your Office 365 account page.

You can then start making your PowerPoint presentation using the web app. If your school's plan supports it, you can also install the Office 365 apps to your computer by clicking the "Install Office" button on your Office 365 account page and running the downloaded installation file. What sets the Office 365 Education account apart from the regular free account is that you have unlimited personal cloud storage and access to other Office apps like Word, Excel, and Outlook.

Read the original article on SlashGear .

Introducing Copilot+ PCs

May 20, 2024 | Yusuf Mehdi - Executive Vice President, Consumer Chief Marketing Officer

• Share on Facebook (opens new window)
• Share on Twitter (opens new window)
• Share on LinkedIn (opens new window)

An on-demand recording of our May 20 event is available .

Today, at a special event on our new Microsoft campus, we introduced the world to a new category of Windows PCs designed for AI, Copilot+ PCs.    

Copilot+ PCs are the fastest, most intelligent Windows PCs ever built. With powerful new silicon capable of an incredible 40+ TOPS (trillion operations per second), all – day battery life and access to the most advanced AI models, Copilot+ PCs will enable you to do things you can’t on any other PC. Easily find and remember what you have seen in your PC with Recall, generate and refine AI images in near real-time directly on the device using Cocreator, and bridge language barriers with Live Captions, translating audio from 40+ languages into English .  

These experiences come to life on a set of thin, light and beautiful devices from Microsoft Surface and our OEM partners Acer, ASUS, Dell, HP, Lenovo and Samsung, with pre-orders beginning today and availability starting on June 18. Starting at $999, Copilot+ PCs offer incredible value.  

This first wave of Copilot+ PCs is just the beginning. Over the past year, we have seen an incredible pace of innovation of AI in the cloud with Copilot allowing us to do things that we never dreamed possible. Now, we begin a new chapter with AI innovation on the device. We have completely reimagined the entirety of the PC – from silicon to the operating system, the application layer to the cloud – with AI at the center, marking the most significant change to the Windows platform in decades.  

YouTube Video

The fastest, most secure Windows PCs ever built  

We introduced an all-new system architecture to bring the power of the CPU, GPU, and now a new high performance Neural Processing Unit (NPU) together. Connected to and enhanced by the large language models (LLMs) running in our Azure Cloud in concert with small language models (SLMs), Copilot+ PCs can now achieve a level of performance never seen before. They are up to 20x more powerful [1] and up to 100x as efficient [2] for running AI workloads and deliver industry-leading AI acceleration. They outperform Apple’s MacBook Air 15” by up to 58% in sustained multithreaded performance [3] , all while delivering all-day battery life.  With incredible efficiency, Copilot+ PCs can deliver up to 22 hours of local video playback or 15 hours of web browsing on a single charge. [4] That is up to 20% more battery in local video playback than the MacBook Air 15”. [5]

Windows now has the best implementation of apps on the fastest chip, starting with Qualcomm. We now offer more native Arm64 experiences than ever before, including our fastest implementation of Microsoft 365 apps like Teams, PowerPoint, Outlook, Word, Excel, OneDrive and OneNote. Chrome, Spotify, Zoom, WhatsApp, Adobe Photoshop, Adobe Lightroom, Blender, Affinity Suite, DaVinci Resolve and many more now run​ natively on Arm to give you great performance with additional apps, like Slack, releasing later this year. In fact, 87% of the total app minutes people spend in apps today have native Arm versions. [6] With a powerful new emulator, Prism, your apps run great, whether native or emulated.

Every Copilot+ PC comes secured out of the box. The Microsoft Pluton Security processor will be enabled by default on all Copilot+ PCs and we have introduced a number of new features, updates and defaults to Windows 11 that make it easy for users to stay secure. And, we’ve built in personalized privacy controls to help you protect what’s important to you. You can read more about how we are making Windows more secure here .

Entirely new, powerful AI experiences   

Copilot+ PCs leverage powerful processors and multiple state-of-the-art AI models, including several of Microsoft’s world-class SLMs, to unlock a new set of experiences you can run locally, directly on the device. This removes previous limitations on things like latency, cost and even privacy to help you be more productive, creative and communicate more effectively.  

Recall instantly  

We set out to solve one of the most frustrating problems we encounter daily – finding something we know we have seen before on our PC. Today, we must remember what file folder it was stored in, what website it was on, or scroll through hundreds of emails trying to find it.   

Now with Recall, you can access virtually what you have seen or done on your PC in a way that feels like having photographic memory. Copilot+ PCs organize information like we do – based on relationships and associations unique to each of our individual experiences. This helps you remember things you may have forgotten so you can find what you’re looking for quickly and intuitively by simply using the cues you remember. [7]

You can scroll across time to find the content you need in your timeline across any application, website, document, or more. Interact intuitively using snapshots with screenray to help you take the next step using suggested actions based on object recognition. And get back to where you were, whether to a specific email in Outlook or the right chat in Teams.

Recall leverages your personal semantic index, built and stored entirely on your device. Your snapshots are yours; they stay locally on your PC. You can delete individual snapshots, adjust and delete ranges of time in Settings, or pause at any point right from the icon in the System Tray on your Taskbar. You can also filter apps and websites from ever being saved. You are always in control with privacy you can trust.

Cocreate with AI-powered image creation and editing, built into Windows

Since the launch of Image Creator, almost 10 billion images have been generated, helping more people bring their ideas to life easily by using natural language to describe what they want to create. Yet, today’s cloud offerings may limit the number of images you can create, keep you waiting while the artwork processes or even present privacy concerns. By using the Neural Processing Units (NPUs) and powerful local small language models, we are bringing innovative new experiences to your favorite creative applications like Paint and Photos.

Combine your ink strokes with text prompts to generate new images in nearly real time with Cocreator. As you iterate, so does the artwork, helping you more easily refine, edit and evolve your ideas. Powerful diffusion-based algorithms optimize for the highest quality output over minimum steps to make it feel like you are creating alongside AI. Use the creativity slider to choose from a range of artwork from more literal to more expressive. Once you select your artwork, you can continue iterating on top of it, helping you express your ideas, regardless of your creative skills.

Take photo editing and image creation to the next level. With Restyle Image, you can reimagine your personal photos with a new style combining image generation and photo editing in Photos. Use a pre-set style like Cyberpunk or Claymation to change the background, foreground or full picture to create an entirely new image. Or jumpstart your next creative project and get visual inspiration with Image Creator in Photos. On Copilot+ PCs you can generate endless images for free, fast, with the ability to fine tune images to your liking and to save your favorites to collections.

Innovative AI experiences from the creative apps you love

We are also partnering with some of the biggest and most-loved applications on the planet to leverage the power of the NPU to deliver new innovative AI experiences.

Together with Adobe, we are thrilled to announce Adobe’s flagship apps are coming to Copilot+ PCs, including Photoshop, Lightroom and Express – available today. Illustrator, Premiere Pro and more are coming this summer. And we’re continuing to partner to optimize AI in these apps for the NPU. For Adobe Creative Cloud customers, they will benefit from the full performance advantages of Copilot+ PCs to express their creativity faster than ever before.

DaVinci Resolve Studio    

Effortlessly apply visual effects to objects and people using NPU-accelerated Magic Mask in DaVinci Resolve Studio.  

Remove the background from any video clip in a snap using Auto Cutout running on the NPU in CapCut.  

Stay in your flow with faster, more responsive adaptive input controls, like head movement or facial expressions via the new NPU-powered camera pipeline in Cephable.  

LiquidText  

Make quicker and smarter annotations to documents, using AI features that run entirely on-device via NPU, so data stays private in LiquidText. 

Have fun breaking down and remixing any music track, with a new, higher-quality version of NeuralMix™ that’s exclusive to NPU in Algoriddim’s djay Pro.  

Connect and communicate effortlessly with live captions  

In an increasingly connected and global world, Windows wants to bring people closer together. Whether catching up on your favorite podcast from a different country, or watching your favorite international sports team, or even collaborating with friends and colleagues across the world, we want to make more content accessible to more people.   

Live Captions now has live translations and will turn any audio that passes through your PC into a single, English-language caption experience, in real time on your screen across all your apps consistently. You can translate any live or pre-recorded audio in any app or video platform from over 40 languages into English subtitles instantly, automatically and even while you’re offline. Powered by the NPU and available across all Copilot+ PCs, now you can have confidence your words are understood as intended.   

New and enhanced Windows Studio Effects  

Look and sound your best automatically with easily accessible controls at your fingertips in Quick Settings. Portrait light automatically adjusts the image to improve your perceived illumination in a dark environment or brighten the foreground pixels when in a low-light environment. Three new creative filters (illustrated, animated or watercolor) add an artistic flare. Eye contact teleprompter helps you maintain eye contact while reading your screen. New improvements to voice focus and portrait blur help ensure you’re always in focus.   

Copilot, your everyday AI companion

Every Copilot+ PC comes with your personal powerful AI agent that is just a single tap away on keyboards with the new Copilot key. [8] Copilot will now have the full application experience customers have been asking for in a streamlined, simple yet powerful and personal design. Copilot puts the most advanced AI models at your fingertips. In the coming weeks, get access to the latest models including GPT-4o from our partners at OpenAI, so you can have voice conversations that feel more natural.

Advancing AI responsibly

At Microsoft, we have a company-wide commitment to develop ethical, safe and secure AI. Our responsible AI principles guided the development of these new experiences, and all AI features are aligned with our standards. Learn more here .

New Copilot+ PCs from Microsoft Surface and our partners

We have worked with each of the top OEMs — Acer, ASUS, Dell, HP, Lenovo, Samsung — and of course Surface, to bring exciting new Copilot+ PCs that will begin to launch on June 18. Starting at $999, these devices are up to $200 less than similar spec’d devices [9] .

Surface plays a key role in the Windows ecosystem, as we design software and hardware together to deliver innovative designs and meaningful experiences to our customers and fans. We are introducing the first-ever Copilot+ PCs from Surface: The all-new Surface Pro and Surface Laptop.

The new Surface Laptop is a powerhouse in an updated, modern laptop design with razor-thin bezels, a brilliant touchscreen display, AI-enhanced camera, premium audio, and now with a haptic touchpad.

Choose between a 13.8” and 15” display and four stunning colors. Enjoy up to 22 hours of local video playback on Surface Laptop 15” or up to 20 hours on Surface Laptop13.8” on top of incredible performance and all-new AI experiences.

The new Surface Pro is the most flexible 2-in-1 laptop, now reimagined with more speed and battery life to power all-new AI experiences. It introduces a new, optional OLED with HDR display, and ultrawide field of view camera perfect for Windows Studio Effects. The new Surface Pro Flex Keyboard is the first 2-in-1 keyboard designed to be used both attached or detached. It delivers enhanced stability, with Surface Slim Pen storage and charging integrated seamlessly, as well as a quiet, haptic touchpad. Learn more here.

New Copilot+ PCs from the biggest brands available starting June 18:

• Acer : Acer’s Swift 14 AI 2.5K touchscreen enables you to draw and edit your vision with greater accuracy and with color-accurate imagery. Launch and discover AI-enhanced features, like Acer PurifiedVoice 2.0 and Purified View, with a touch of the dedicated AcerSense button.
• ASUS : The ASUS Vivobook S 15 is a powerful device that brings AI experiences to life with its Snapdragon X Elite Platform and built-in Qualcomm® AI. It boasts 40+ NPU TOPS, a dual-fan cooling system, and up to 1 TB of storage. Next-gen AI enhancements include Windows Studio effects v2 and ASUS AiSense camera, with presence-detection capabilities for Adaptive Dimming and Lock. Built for portability, it has an ultra-slim and light all-metal design, a high-capacity battery, and premium styling with a single-zone RGB backlit keyboard.
• Dell : Dell is launching five new Copilot+ PCs, including the XPS 13, Inspiron 14 Plus, Inspiron 14, Latitude 7455, and Latitude 5455, offering a range of consumer and commercial options that deliver groundbreaking battery life and unique AI experiences. The XPS 13 is powered by Snapdragon X Elite processors and features a premium, futuristic design, while the Latitude 7455 boasts a stunning QHD+ display and quad speakers with AI noise reduction. The Inspiron14 and Inspiron 14 Plus feature a Snapdragon X Plus 1and are crafted with lightweight, low carbon aluminum and are energy efficient with EPEAT Gold rating.
• HP : HP’s OmniBook X AI PC and HP EliteBook Ultra G1q AI PC with Snapdragon X Elite are slim and sleek designs, delivering advanced performance and mobility for a more personalized computing experience. Features include long-lasting battery life and AI-powered productivity tools, such as real-time transcription and meeting summaries. A 5MP camera with automatic framing and eye focus is supported by Poly Studio’s crystal-clear audio for enhanced virtual interactions.
• Lenovo : Lenovo is launching two AI PCs: one built for consumers, Yoga Slim 7x, and one for commercial, ThinkPad T14s Gen 6. The Yoga Slim 7x brings efficiency for creatives, featuring a 14.5” touchscreen with 3K Dolby Vision and optimized power for 3D rendering and video editing. The T14s Gen 6 brings enterprise-level experiences and AI performance to your work tasks, with features including a webcam privacy shutter, Wi-Fi 7 connectivity and up to 64GB RAM.
• Samsung : Samsung’s new Galaxy Book4 Edge is ultra-thin and light, with a 3K resolution 2x AMOLED display and Wi-Fi 7 connectivity. It has a long-lasting battery that provides up to 22 hours of video playback, making it perfect for work or entertainment on the go.

Learn more about new Copilot+ PCs and pre-order today at Microsoft.com and from major PC manufacturers, as well as other leading global retailers.

Start testing for commercial deployment today

Copilot+ PCs offer businesses the most performant Windows 11 devices with unique AI capabilities to unlock productivity, improve collaboration and drive efficiency. As a Windows PC, businesses can deploy and manage a Copilot+ PC with the same tools and processes used today including IT controls for new features and AppAssure support. We recommend IT admins begin testing and readying for deployment to start empowering your workforce with access to powerful AI features on these high-performance devices. You can read more about our commercial experiences here .

AI innovation across the Windows ecosystem  

Like we’ve always done with Windows, we have built a platform for our ecosystem partners to build on.  

The first Copilot+ PCs will launch with both the Snapdragon® X Elite and Snapdragon® X Plus processors and feature leading performance per watt thanks to the custom Qualcomm Oryon™ CPU, which delivers unrivaled performance and battery efficiency. Snapdragon X Series delivers 45 NPU TOPS all-in-one system on a chip (SoC). The premium integrated Qualcomm® Adreno ™ GPU delivers stunning graphics for immersive entertainment. We look forward to expanding through deep partnerships with Intel and AMD, starting with Lunar Lake and Strix Point. We will bring new Copilot+ PC experiences at a later date. In the future we expect to see devices with this silicon paired with powerful graphics cards like NVIDIA GeForce RTX and AMD Radeon™, bringing Copilot+ PC experiences to reach even broader audiences like advanced gamers and creators.  

We are at an inflection point where the PC will accelerate AI innovation. We believe the richest AI experiences will only be possible when the cloud and device work together in concert. Together with our partners, we’re setting the frame for the next decade of Windows innovation.  

[1] Based on snapshot of aggregated, non-gaming app usage data as of April 2024 for iGPU-based laptops and 2-in-1 devices running Windows 10 and Windows 11 in US, UK, CA, FR, AU, DE, JP.

[2] Tested April 2024 using Phi SLM workload running 512-token prompt processing in a loop with default settings comparing pre-release Copilot+ PC builds with Snapdragon Elite X 12 Core and Snapdragon X Plus 10 core configurations (QNN build) to Windows 11 PC with NVIDIA 4080 GPU configuration (CUDA build).

[3] Tested May 2024 using Cinebench 2024 Multi-Core benchmark comparing Copilot+ PCs with Snapdragon X Elite 12 core and Snapdragon X Plus 10 core configurations to MacBook Air 15” with M3 8 core CPU / 10 Core GPU configuration. Performance will vary significantly between device configuration and usage.

[4] *Battery life varies significantly by device and with settings, usage and other factors. See aka.ms/cpclaims*

[5] *Battery life varies significantly based on device configuration, usage, network and feature configuration, signal strength, settings and other factors. Testing conducted May 2024 using the prelease Windows ADK full screen local video playback assessment under standard testing conditions, with the device connected to Wi-Fi and screen brightness set to 150 nits, comparing Copilot+ PCs with Snapdragon X Elite 12 core and Snapdragon X Plus 10 core configurations running Windows Version 26097.5003 (24H2) to MacBook Air 15” M3 8-Core CPU/ 10 Core GPU running macOS 14.4 with similar device configurations and testing scenario.

[6] Based on snapshot of aggregated, non-gaming app usage data as of April 2024 for iGPU-based laptops and 2-in-1 devices running Windows 10 and Windows 11 in US, UK, CA, FR, AU, DE, JP.

[7] Recall is optimized for select languages (English, Chinese (simplified), French, German, Japanese, and Spanish.) Content-based and storage limitations apply. Learn more here .

[8] Copilot key functionality may vary. See aka.ms/keysupport

[9] Based on MSRPs; actual savings may vary

Tags: AI , Copilot+ PC

• Check us out on RSS