example of abstract for master thesis

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

• How To Write A Thesis Abstract
• Writing guide

How to write a thesis abstract: Full guide with examples

Let professional writers deal with your paper, quickly and efficiently.

A thesis abstract is a brief summary of your graduate work that outlines your research and main findings. It’s a standalone section that comes right after the title page and before the table of contents. The abstract provides a quick overview of your study’s purpose, methods, key results, and conclusions.

A standard thesis abstract should be around 150–300 words long, or no more than 1 page. However, before you begin writing this section be sure to figure out the length requirements in your school.

An abstract of a thesis is the first section evaluators read and often the only part other researchers review to determine if your work is relevant to their studies. Since abstracts are indexed in academic databases, you need to communicate your outcomes in a way that shows the value of your thesis.

Read our guide to discover how to write a thesis abstract like a pro. You'll find clear step-by-step instructions and free examples that will help you create a strong overview.

Alternatively, you can download our sample thesis abstract layout to see how it’s structured. You can adjust the format according to your needs.

Table of contents

Key elements of a thesis abstract

Even though both thesis abstract and introduction chapter present research, they have different goals and format. While the thesis introduction sets up the background of your study, the abstract summarizes your entire paper along with your findings.

When writing your thesis abstract, make sure to include these crucial parts:

Research problem: describe your research question or hypothesis and explain why it’s important.

• Methods: briefly outline how you carried out your research.
• Findings: mention the most significant results of your study.
• Conclusions: share your main takeaways and their impact.
• Keywords: add 4-6 relevant terms that help others find your work in databases.

Note: Bear in mind that the formatting rules can vary greatly depending on your discipline, department, and even supervisor. Some schools might not require keywords, while others may ask for extra components. Be sure to discuss expectations with your advisor before starting a thesis abstract.

Need help with your thesis abstract? Rely on expert thesis writing services and get professional assistance. With years of experience across various academic fields, we can help you craft an abstract that will exceed your expectations. Whether you need a fresh perspective on your draft or guidance throughout the writing process, our professional team can help you make a strong academic impression.

How to write an abstract for a thesis: 5 steps

Here's a pro tip that will save you countless hours of revision: write an abstract last when the other parts of a thesis are complete. By then, you'll know exactly which findings matter most and how to report them.

Let us walk you through 5 essential steps on how to write an abstract for a thesis paper.

Step 1. Start with the purpose of your thesis

Begin your thesis abstract by quickly introducing the study's purpose. Your main task is to explain the "why" behind the months (or years!) of hard work.

Here’re the points you should cover:

• What problem or question are you addressing?
• Why is the issue important?
• What influence does your work have?

Use language that directly conveys the motivation behind your study.

“This thesis examines the impact of digital literacy on student performance in higher education.”

Tip: Keep it simple and direct. Clear language often makes a stronger impression than fancy words. Your goal is to make any reader, even those outside your field, understand why your research matters.

Step 2. Describe the methodology

Briefly outline how you carried out your study. This section of the thesis abstract should give readers enough detail to understand your approach without diving into every step. Your goal is to show that your methods were appropriate and thorough.

Include key details like:

• Research approach (qualitative, quantitative, or mixed-methods)
• Data collection methods (surveys, interviews, experiments, observations)
• Analysis tools (SPSS for statistical analysis, NVivo for qualitative data, Python for data processing)
• Sample size and characteristics ("200 undergraduate students" or "30 Fortune 500 companies")
• Timeframe if relevant ("longitudinal study over two years" or "data from 2020-2023")

“Using SPSS 26.0, we analyzed survey responses from 500 participants and conducted thematic analysis of 20 in-depth interviews through NVivo 12." "We performed content analysis on 50 academic journals using Leximancer, followed by manual coding."

Try to be selective. Only mention methods that directly relate to your main findings. Your thesis paper abstract isn't the place to list every research tool you tried.

Step 3. Share the core outcomes

A good abstract in a thesis should present the most important findings. But it’s essential to keep the balance. Stay on point, but don’t overwhelm readers with redundant numbers or statistics. Instead, consider the findings that would make someone want to read your full thesis.

Are there any significant patterns or trends? Have you discovered any unexpected results? Those are the points you may want to highlight in your thesis abstract.

"Students with higher digital literacy scores showed 30% better academic performance, particularly in online learning environments. The analysis showed a strong link (r=0.85) between consistent use of digital tools for learning and higher rates of course completion."

Step 4. State the main conclusion

Wrap up your thesis abstract by discussing the broader implications of your findings and the value of your contributions. Make sure your conclusions clearly link your results to practical or theoretical applications. Be straightforward and emphasize the significance of your work.

“These results suggest that digital literacy should be a priority in educational curricula to enhance student success.”

Finish the abstract on a strong note. The final sentences often receive extra attention from readers, so they should emphasize your research's real-world impact and leave a lasting impression.

Step 5. Include the keywords

While not all institutions require keywords in thesis abstracts, including them significantly increases your research's visibility. Keywords are vital for digital indexing in databases and library systems.

To make your thesis more discoverable, choose 4-6 keywords that capture the essence of your study. Select terms that:

• Represent your main research concepts
• Include field-specific terminology
• Reflect your methodology if distinctive
• Cover theoretical frameworks used.

For example, if your thesis examines digital literacy in education, your keywords might be: " digital literacy, higher education, academic success, student performance, mixed-methods research ".

Consider both broad and specific terms. While general terms like " higher education " help categorize your work, specific terms like " digital literacy assessment " help interested researchers find your precise topic.

Note: Check your field's standard terminology databases or thesauri (like Education Resources Information Center for education research) to ensure you're using recognized terms in your discipline.

Thesis abstract example

Let's look at some real-world thesis abstract examples that demonstrate how to approach each element. Pay attention to how information is structured in this sample.

This thesis examines how small retail businesses leverage social media marketing to drive growth in an increasingly digital marketplace. While social media's role in large corporate marketing is well-documented, its impact on small business success remains unclear. This study investigated 50 UK-based retail startups that launched during the post-pandemic period, analyzing their social media strategies and business performance metrics. The research employed a longitudinal mixed-methods approach, combining quantitative analysis of social media engagement data from Facebook and Instagram analytics with qualitative insights from semi-structured interviews with business owners. Data analysis through Tableau and MAXQDA revealed that businesses allocating over 30% of their marketing budget to social media achieved 45% higher customer acquisition rates and 60% better retention rates compared to those with minimal social media presence. Content analysis identified key success factors: consistent brand messaging, customer interaction patterns, and strategic posting times. These findings provide practical guidelines for small business social media strategies and contribute to digital marketing literature by quantifying social media's impact on business growth metrics. The research suggests that targeted social media investment represents a critical growth driver for retail startups, particularly in establishing initial market presence. Keywords: social media marketing, retail startups, business growth, digital strategy, customer engagement

Thesis abstract writing tips

Follow these actionable guidelines when writing an abstract for a thesis:

Write in past tense for completed research.

• Use active voice for clarity (" We analyzed " rather than " It was analyzed ").
• Use technical jargon only when needed and define the terms in parentheses the first time they appear.
• Only include information that is covered in your thesis – don't introduce new findings or claims in the abstract.
• Present information in the same order as your thesis (introduction → methods → results → conclusions).
• Remove redundant phrases and background details.

Common mistakes to avoid when writing a thesis abstract

Let's explore common pitfalls researchers often encounter when writing thesis abstracts.

• Don’t include citations and references in your abstract, even when discussing foundational concepts. Even if your thesis builds directly on a specific method, mention it without citation.
• Keep background literature to a minimum. While context is important, limit it to 1-2 sentences that establish your study’s relevance.
• Be cautious with abbreviations and acronyms. Write out terms in full unless they're universally known in your field, such as DNA, HIV, or UNESCO.
• Avoid introducing new findings, interpretations, or discussing limitations and future research directions. Your abstract should reflect what you actually studied and discovered, not what you plan to investigate next.
• Avoid including tables, figures, or complex equations. Present numerical results in text form and use words to describe relationships or patterns.

Final thoughts on how to write an abstract for thesis

Writing a thesis abstract requires careful attention to detail and a clear understanding of your core message. Remember to review each sentence critically – if it doesn't add to the understanding of your work, it probably doesn't belong in your abstract. Your goal is to create a concise yet comprehensive snapshot that makes readers want to explore your full thesis.

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

🚀 Work With Us

Private Coaching

Language Editing

Qualitative Coding

✨ Free Resources

Templates & Tools

Short Courses

Articles & Videos

The Dissertation/Thesis Abstract

How To Write A High-Impact Abstract (With Examples)

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

Example: Dissertation/thesis abstract

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert.

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

You Might Also Like:

How To Choose A Tutor For Your Dissertation

Hiring the right tutor for your dissertation or thesis can make the difference between passing and failing. Here’s what you need to consider.

5 Signs You Need A Dissertation Helper

Discover the 5 signs that suggest you need a dissertation helper to get unstuck, finish your degree and get your life back.

Writing A Dissertation While Working: A How-To Guide

Struggling to balance your dissertation with a full-time job and family? Learn practical strategies to achieve success.

How To Review & Understand Academic Literature Quickly

Learn how to fast-track your literature review by reading with intention and clarity. Dr E and Amy Murdock explain how.

Dissertation Writing Services: Far Worse Than You Think

Thinking about using a dissertation or thesis writing service? You might want to reconsider that move. Here’s what you need to know.

📄 FREE TEMPLATES

Research Topic Ideation

Proposal Writing

Literature Review

Methodology & Analysis

Academic Writing

Referencing & Citing

Apps, Tools & Tricks

The Grad Coach Podcast

21 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

Write an abstract on the impact of monetary policy on banks profitability in Nigeria

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Nicely explained. Very simple to understand. Thank you!

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Thank you! First time writing anything this long!

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Submit Comment

• Print Friendly

• Study Documents
• Learning Tools

Writing Guides

• Citation Generator
• Flash Card Generator
• Homework Help
• Essay Examples
• Essay Title Generator
• Essay Topic Generator
• Essay Outline Generator
• Flashcard Generator
• Plagiarism Checker
• Paraphrasing Tool
• Conclusion Generator
• Thesis Statement Generator
• Introduction Generator
• Literature Review Generator
• Hypothesis Generator
• Human Editing Service
• Essay Hook Generator

Writing Guides  /  15 Abstract Examples: A Comprehensive Guide

15 Abstract Examples: A Comprehensive Guide

Demystifying Abstract Writing

An abstract represents a concise, well-articulated summary of an academic piece or research. But writing an abstract goes beyond merely creating a summary. In this piece, we’ll delve into examples of abstracts to illuminate what they truly are, along with the necessary tone, style, and word counts.

You’ll also see how diverse abstract writing can be, tailored according to the subject area. For instance, an abstract for empirical research in the sciences contrasts greatly from that of a humanities article.

View 120,000+ High Quality Essay Examples

Learn-by-example to improve your academic writing

The Importance of Abstracts: Why Do We Write Them?

Every abstract you encounter, including our abstract writing example, has a few core characteristics. The primary role of an abstract is to encapsulate the essential points of a research article, much like a book’s back cover. The back jacket often influences whether you buy the book or not.

Similarly, academic papers are often behind paywalls, and the abstract assists readers in deciding if they should purchase the article. If you’re a student or researcher, the abstract helps you gauge whether the article is worth your time.

Furthermore, abstracts promote ongoing research in your field by incorporating keywords that allow others to locate your work. Knowing how to write a good abstract contributes to your professionalism, especially crucial for graduate-level studies. This skill might be vital when submitting your research to peer-reviewed journals or soliciting grant funding.

Breaking Down an Abstract: What’s Inside?

The contents of an abstract heavily rely on the type of study, research design, and subject area. An abstract may contain a succinct background statement highlighting the research’s significance, a problem statement, the methodologies used, a synopsis of the results, and the conclusions drawn.

When it comes to writing an abstract for a research paper, striking a balance between consciousness and informative detail is essential. Our examples of abstracts will help you grasp this balance better.

Moreover, you’ll learn how to format abstracts variably, matching the requirements of your degree program or publication guidelines.

Key Elements to Include in Your Abstract

• Brief Background: Introduce the importance of the research from your point of view.
• Problem Statement: Define the issue your research addresses, commonly referred to as the thesis statement.
• Methodology: Describe the research methods you employed.
• Synopsis: This should include a summary of your results and conclusions.
• Keywords: Implement terms that others will use to find your article.

Types of Abstracts

• Descriptive Abstracts: These give an overview of the source material without delving into results and conclusions.
• Informative Abstracts: These offer a more detailed look into your research, including the purpose, methods, results, and conclusions.
• Always write your abstract in the present tense.
• Keep track of word counts to maintain brevity.
• The original text should guide your abstract.
• Always provide a good synopsis in your abstract.
• If needed, use your abstract to draft a compelling query letter.
• Consider providing a literature review abstract if your research involves an extensive review of existing literature.

Types of Abstract

According to the Purdue Online Writing Lab resource, there are two different types of abstract: informational and descriptive.

Although informative and descriptive abstracts seem similar, they are different in a few key ways.

An informative abstract contains all the information related to the research, including the results and the conclusion.

A descriptive abstract is typically much shorter, and does not provide as much information. Rather, the descriptive abstract just tells the reader what the research or the article is about and not much more.

The descriptive abstract is more of a tagline or a teaser, whereas the informative abstract is more like a summary.

You will find both types of abstracts in the examples below.

Abstract Examples

Informative abstract example 1.

Emotional intelligence (EQ) has been correlated with leadership effectiveness in organizations. Using a mixed-methods approach, this study assesses the importance of emotional intelligence on academic performance at the high school level.

The Emotional Intelligence rating scale was used, as well as semi-structured interviews with teachers. Participant grades were collected. Emotional intelligence was found to correlate positively with academic success. Implications for pedagogical practice are discussed.

Explanation

This is a typical informative abstract for empirical social sciences research. Most informative abstracts proceed in a logical fashion to reflect the organization of the main paper: with sections on the background, methods, results, and conclusions.

Informative Abstract Example 2

Social learning takes place through observations of others within a community. In diverse urban landscapes and through digital media, social learning may be qualitatively different from the social learning that takes place within families and tightly-knit social circles.

This study examines the differences between social learning that takes place in the home versus social learning that takes place from watching celebrities and other role models online. Results show that social learning takes place with equal efficacy. These results show that social learning does not just take place within known social circles, and that observations of others can lead to multiple types of learning.

This is a typical informative abstract for empirical social science research. After the background statement, the author discusses the problem statement or research question, followed by the results and the conclusions.

Informative Abstract Example 3

Few studies have examined the connection between visual imagery and emotional reactions to news media consumption. This study addresses the gap in the literature via the use of content analysis. Content analysis methods were used to analyze five news media television sites over the course of six months.

Using the Yolanda Metrics method, the researchers ascertained ten main words that were used throughout each of the news media sites. Implications and suggestions for future research are included.

This abstract provides an informative synopsis of a quantitative study on content analysis. The author provides the background information, addresses the methods, and also outlines the conclusions of the research.

Informative Abstract Example 4

This study explores the relationship between nurse educator theoretical viewpoints and nursing outcomes. Using a qualitative descriptive study, the researchers conducted face-to-face interviews with nursing students and nurse educators. The results show that nurse educator theoretical viewpoints had a direct bearing on nurse self-concept. Nurse educators should be cognizant of their biases and theoretical viewpoints when instructing students.

This example showcases how to write an abstract for a qualitative study. Qualitative studies also have clearly defined research methods. Therefore, it is important to keep in mind the general principles of informative abstract writing. Always begin with the research question or problem statement, and proceed to offer a one-sentence description of study methods and results.

Informative Abstract Example 5

Aboriginal people have poorer health outcomes versus their counterparts from other ethnic groups. In this study, public health researchers conducted an epidemiological data analysis using results from the Transcultural Health Report. Using a chi-square test, the researchers found that there is a direct correlation between ethnicity and health status. Policymakers should consider introducing methods for reducing health disparities among minority groups.

This informative abstract details the methods used in the report. As with other informative abstracts, it is written in the past tense. The abstract provides the reader with a summary of the research that has already been conducted.

Informative Abstract Example 6

We examine the contradictions of decolonization as official state policy. Using themes related to decolonization from the literature, we discuss how oppressed people develop cogent policies that create new systems of power. Intersectionality is also discussed.

Through a historical analysis, it was found that decolonization and political identity construction take place not as reactionary pathways but as deliberate means of regaining access to power and privilege. The cultivation of new political and social identities promotes social cohesion in formerly colonized nation-states, paving the way for future means of identity construction.

This abstract is informative but because it does not involve a unique empirical research design, it is written in a different manner from other informative abstracts. The researchers use tone, style, and diction that parallels that which takes place within the body of the text. The main themes are elucidated.

Informative Abstract Example 7

The implementation of a nationwide mandatory vaccination program against influenza in the country of Maconda was designed to lower rates of preventable illnesses. This study was designed to measure the cost-effectiveness of the mandatory vaccination program.

This is a cohort study designed to assess the rates of new influenza cases among both children (age > 8 years) and adults (age > 18 years). Using the National Reference Data Report of Maconda, the researchers compiled new case data (n = 2034) from 2014 to 2018.

A total of 45 new cases were reported during the years of 2014 and 2015, and after that, the number of new cases dropped by 74%.

The significant decrease in new influenza cases can be attributed to the introduction of mandatory vaccination.

Interpretation

The mandatory vaccination program proves cost-effective given its efficacy in controlling the disease.

This method of writing an informative abstract divides the content into respective subject headers. This style makes the abstract easier for some readers to scan quickly.

Informative Abstract Example 8

Mindfulness-based meditation and mindfulness-based stress reduction techniques have been shown to reduce burnout and improve employee engagement. Using a pretest/posttest design, the researchers randomly assigned nurses (n = 136) to the control and experimental groups. The Kabat-Zinn mindfulness-based stress reduction technique was used as the primary intervention for the experimental group.

Quantitative findings revealed significant improvements on self-report scales for depression and anxiety. Nurse leaders and administrators should consider implementing a mindfulness-based stress reduction program to reduce burnout and improve overall nurse performance.

This abstract contains all the necessary information you would need to make an assessment of whether the research was pertinent to your study. When you are writing an informative abstract, consider taking one sentence from each of the sections in your research (introduction/background, methods, results, and conclusion).

Descriptive Abstract Example 1

What inspires individuals to become members of a new religious movement, or a “cult”? This review of the literature offers some suggestions as to the psychological and sociological motivations for joining a new religious movement, offering suggestions for future research.

Unlike informative abstracts, descriptive abstracts simply alert the reader of the main gist of the article. Reading this abstract does not tell you exactly what the researchers found out about their subject, but it does let the reader know what the overall subject matter was and the methods used to conduct the research.

Descriptive Abstract Example 2

With few remaining survivors of the Holocaust, it becomes critical for historians to gather as much data that can contribute to an overall understanding of the ways trauma has been incorporated into identity. Interviews with five Holocaust survivors reveal new information about the role that art and music played in self-healing and community healing.

This descriptive abstract does not give too much information away, simply telling the reader that the researcher used interviews and a case study research design. Although it is a brief description of the study, the researchers succinctly summarize the contents and results.

Descriptive Abstract Example 3

Absurdist theater and literature have had a strong influence on playwrights in France and England. This analysis of absurdist theater addresses the primary symbols being used in absurdist literature and traces the evolution of those symbols as they parallel historical events.

As with most descriptive abstracts, this example is short. You can use descriptive abstracts to provide the reader with a summary of non-empirical research such as literary criticism.

Descriptive Abstract Example 4

The architecture of Oscar Niemeyer reflects socialist sensibilities in the urban planning of Brasilia. This research explores the philosophical underpinnings of Niemeyer’s design through an analysis of several of the main elements of the National Congress of Brazil. Implications and influences of Niemeyer’s work are also discussed.

Note how with the descriptive abstract, you are writing about the research in a more abstract and detached way than when you write an informative abstract.

Descriptive Abstract Example 5

Jacques Derrida has written extensively on the symbolism and the metonymy of September 11. In this research, we critique Derrida’s position, on the grounds that terrorism is better understood from within a neo-realist framework. Derrida’s analysis lacks coherence, is pompous and verbose, and is unnecessarily abstract when considering the need for a cogent counterterrorism strategy.

Like most descriptive abstracts, this encapsulates the main idea of the research but does not necessarily follow the same format as you might use in an informative abstract. Whereas an informative abstract follows the chronological format used in the paper you present, with introduction, methods, findings, and conclusion, a descriptive abstract only focuses on the main idea.

Descriptive Abstract Example 6

The Five Factor model of personality has been well established in the literature and is one of the most reliable and valid methods of assessing success. In this study, we use the Five Factor model to show when the qualities of neuroticism and introversion, which have been typically linked with low rates of success, are actually correlated with achievement in certain job sectors. Implications and suggestions for clinicians are discussed.

This descriptive abstract does not discuss the methodology used in the research, which is what differentiates it from an informative abstract. However, the description does include the basic elements contained in the report.

Descriptive Abstract Example 7

This is a case study of a medium-sized company, analyzing the competencies required for entering into the Indian retail market. Focusing on Mumbai and Bangalore, the expansion into these markets reveals potential challenges for European firms. A comparison case with a failed expansion into Wuhan, China is given, offering an explanation for how there are no global cross-cultural competencies that can be applied in all cases.

While this descriptive abstract shows the reader what the paper addresses, the methods and results are omitted. A descriptive abstract is shorter than an informative abstract.

Which Type of Abstract Should I Use?

Check with your professors or academic advisors, or with the editor of the peer-reviewed journal before determining which type of abstract is right for you.

If you have conducted original empirical research in the social sciences, you will most likely want to use an informative abstract.

However, when you are writing about the arts or humanities, a descriptive abstract might work best.

What Information Should I Include in An Abstract?

The information you include in the abstract will depend on the substantive content of your report.

Consider breaking down your abstract into five separate components, corresponding roughly with the structure of your original research.

You can write one or two sentences on each of these sections:

For Original Empirical Research

1. Background/Introductory Sentence

If you have conducted, or are going to conduct, an original research, then consider the following elements for your abstract:

What was your hypothesis?

What has the previous literature said about your subject?

What was the gap in the literature you are filling with your research?

What are the research questions?

What problem are you trying to solve?

What theoretical viewpoint or approach did you take?

What was your research design (qualitative, quantitative, multi-factorial, mixed-methods)?

What was the setting? Did you conduct a clinical analysis? Or did you conduct a systematic review of literature or a meta-analysis of data?

How many subjects were there?

How did you collect data?

How did you analyze the data?

What methodological weaknesses need to be mentioned?

III. Results

If this was a qualitative study, what were the major findings?

If this was a quantitative study, what were the major findings? Was there an alpha coefficient? What was the standard deviation?

Were the results statistically significant?

1. Discussion

Did the results prove or disprove the hypothesis ?

Were the results significant enough to inform future research?

How do your results link up with previous research? Does your research confirm or go beyond prior literature?

1. Conclusions/Recommendations

What do your results say about the research question or problem statement?

If you had to make a policy recommendation or offer suggestions to other scholars, what would you say?

Are there any concluding thoughts or overarching impressions?

Writing Abstracts for Literary Criticism and Humanities Research

Writing abstracts for research that is not empirical in nature does not involve the same steps as you might use when composing an abstract for the sciences or social sciences.

When writing an abstract for the arts and humanities, consider the following outline, writing one or two sentences for each section:

1. Background/Introduction

What other scholars have said before.

Why you agree or disagree.

Why this is important to study.

1. Your methods or approach

How did you conduct your research?

Did you analyze a specific text, case study, or work of art?

Are you comparing and contrasting?

What philosophical or theoretical model did you use?

III. Findings

What did you discover in the course of your research?

1. Discussion/Conclusion

How are your findings meaningful?

What new discoveries have you made?

How does your work contribute to the discourse?

General Tips for Writing Abstracts

The best way to improve your abstract writing skills is to read more abstracts. When you read other abstracts, you will understand more about what is expected, and what you should include or leave out from the abstract.

Reading abstracts helps you become more familiar with the tone and style, as well as the structure of abstracts.

Write your abstract after you have completed your research.

Many successful abstracts actually take the first sentence from each section of your research, such as the introduction/background, review of literature, methods, results, discussion, and conclusion.

Although it is a good idea to write the results of your original research, avoid giving too much detail. Instead, focus on what really matters.

A good abstract is like an elevator pitch.

While there is no absolute rule for how long an abstract should be, a general rule of thumb is around 100-150 words. However, some descriptive abstracts may be shorter than that, and some informative abstracts could be longer.

How to Write a Synopsis

Writing a synopsis involves summarizing a work’s key elements, including the narrative arc, major plot points, character development, rising action, and plot twists. Here’s a step-by-step guide on how to create a compelling synopsis.

• Outline the Narrative Arc: Start by defining your story’s beginning, middle, and end. This includes the introduction, rising action, climax, falling action, and resolution.
• Identify Major Plot Points: Major plot points are crucial events that propel your story forward. Identify these critical moments and explain how they contribute to the narrative arc.
• Discuss Character Development: Characters are the backbone of your story. Describe your characters at the start of the story and demonstrate how they evolve by the end.
• Illustrate Rising Action: The rising action is a series of events that lead to the climax of your story. Ensure to discuss these events and how they build suspense and momentum.
• Include Plot Twists: If your story has unexpected turns or surprises, highlight these plot twists in your synopsis. However, ensure these twists aren’t revealed too abruptly.

Remember, a synopsis should provide a complete overview of your story. It’s different from a teaser or back cover blurb — your objective isn’t to create suspense, but to succinctly present the whole narrative.

How Long Should a Summary Be

The length of a summary varies based on the complexity and length of the original work. However, as a rule of thumb, a summary should ideally be no more than 10-15% of the original text’s word count. This ensures you cover the significant plot points, character development, narrative arc, rising action, and plot twists without going into excessive detail.

For instance, if you’re summarizing a 300-page novel, your summary may be about 30 pages. If you’re summarizing a short 5-page article, a half-page to one-page summary should suffice.

Remember, the goal of a summary is to condense the source material, maintaining the core ideas and crucial information while trimming unnecessary details. Always aim for brevity and clarity in your summaries.

Abstracts are even shorter versions of executive summaries. Although abstracts are brief and seem relatively easy, they can be challenging to write. If you are struggling to write your abstract, just consider the main ideas of your original research paper and pretend that you are summarizing that research for a friend.

If you would like more examples of strong abstracts in your field of research, or need help composing your abstract or conducting research, call a writing tutor.

“Abstracts,” (n.d.). The Writing Center. https://writingcenter.unc.edu/tips-and-tools/abstracts/

Koopman, P. (1997). How to write an abstract. https://users.ece.cmu.edu/~koopman/essays/abstract.html

University of Massachusetts, Amherst (n.d.). Writing an abstract.

“Writing Report Abstracts,” (n.d.). Purdue Online Writing Lab. https://owl.english.purdue.edu/owl/resource/656/1/

Take the first step to becoming a better academic writer.

Writing tools.

• How to write a research proposal 2021 guide
• Guide to citing in MLA
• Guide to citing in APA format
• Chicago style citation guide
• Harvard referencing and citing guide
• How to complete an informative essay outline

How to Choose the Best Essay Topics

AI Text Detection Services

Unlock Your Writing Potential with Our AI Essay Writing Assistant

The Negative Impacts of Artificial Intelligence on Tactile Learning

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Have you seen?

Share this:.

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Critical Writing

How you can be a better critical writer: going beyond description Have you ever handed in a piece of writing – an essay or report, for example – and got comments back from your tutor saying that it needs to...

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

• HOW WE WORK
• THESIS WRITING
• DISSERTATION PROCESS

Steps Guide to Create Dissertation Abstract With Examples

Home >> Blog >> Steps Guide to Create Dissertation Abstract With Examples

An abstract summarizes your entire dissertation, typically ranging from 200-350 words. It should provide a clear overview of your project and highlight the main points of your argument. To write an effective abstract, you'll need to be concise and organized while still presenting your ideas clearly and coherently.

If you're a student working on a dissertation, you know that writing the abstract can be one of the most challenging parts. But don't worry, we're here to help!

In this blog post, we'll give you a step-by-step guide to creating your dissertation abstract and some examples to help you get started. So read on and start writing an abstract that will make your professors proud!

What is a Dissertation Abstract?

How to write a good dissertation abstract, dissertation abstract example, tips to write a strong dissertation abstract.

‘What is abstract in dissertation writing?’

The abstract is designed to quickly summarize your dissertation in an engaging way. It aims to show readers what they can expect from reading it more thoroughly later on. It is an important part of dissertation writing and must be written carefully.

The abstract is a short and concise way of getting your research paper's message across. It should summarize the entire work in one paragraph, so it can be easily understood by readers who are not familiar with what it is about!

It should be included before the table of contents and after the title page and acknowledgments.

‘What should dissertation abstract include?’

Ideally, a dissertation or thesis abstract should include the following things;

• The study's and research's goal.
• Your dissertation's research methods.
• The key findings and results.
• The implications of the obtained results.

A good abstract discusses all these points. It is written in the present simple tense.

What is the Main Purpose of an Abstract?

The first purpose of an abstract is to capture the attention of potential readers before they read the rest of your work. It should specifically communicate what you were attempting to discover and how this research was conducted so that anyone interested can decide whether or not they want more information on that topic.

The abstract provides brief background information and introduces your work to the readers. It helps readers in deciding whether or not to continue reading your work. It should be included in all research projects and case studies, just like a literature review.

Dissertation Abstract Structure

Here are the sections that must be included in a dissertation abstract format.

• Introduction
• Aims and objectives
• Results and discussion

Dissertation Abstract Length

It varies depending on which college/university you attend. Some universities require that you summarize your study in one paragraph, while others ask for about 300-500 words.

Dissertation abstract word count varies based on different colleges’ policies, so be sure to check yours before writing it.

(back to top)

Here are the easy steps to write a good dissertation abstract.

• 1. Explain the Research Purpose

Explain everything briefly and describe the significance of your research work. State the purpose and significance of your research and what the reader can learn from reading your paper.

The following are the components of an abstract:

• Your research objectives and questions.
• The significance of these research questions.

You must make this section extremely clear to capture your reader's attention and interest. This is where you'll "hook" them with a compelling introduction that will capture their attention in reading more about the project.

They might lose patience if we don't put in the effort from start to finish.

• 2. Describe Research Methodology

Describe how you responded to the research questions. This means that you will present the methodology and design of your research in this paragraph. It could be qualitative or quantitative in nature. Mention it whatever it is for your reader.

However, keep it brief and avoid providing all of the details here.

• 3. State Research’s Main Findings

This section contains the most important findings from your research. It should be concise and clear to readers about what you discovered, without padding it with unnecessary information or repeating things that have already been covered.

Remember to be concise and clear when summarizing the most important aspects of your study, namely answers to its original questions.

• 4. Discuss the Research Implications

Have you ever found yourself struggling to grasp the big picture while reading a lengthy paper? That is why we have implications. It explains what those numbers and findings mean in our daily lives as citizens and readers.

The following are the topics that should be discussed here.

• The significance of your research.
• The significance and impact of your research findings.
• Future research possibilities

Ensure that these elements are included in your abstract.

Here is a dissertation abstract sample PDF for your better understanding.

Thesis Introduction Chapter Sample

Here are the tips for writing a good and engaging abstract for your dissertation.

• Recognize the purpose of writing an abstract.
• Create an abstract after writing the entire dissertation.
• Explain each chapter in one to two lines before writing the abstract.
• Examine some abstract examples to gain a better understanding of them.
• Write clearly and avoid using overly complicated language.
• Concentrate on your personal research.
• Make an effort to keep everything concise and to the point.
• Keep the details for the main sections and don't include everything here.
• When you have finished writing your thesis abstract, it is time to read it and remove any errors thoroughly.

You can save time and effort by using these simple tips to write your dissertation abstract correctly. If you still require assistance, contact us at GradSchoolGenius for help! We are professionals who want nothing more than the best possible outcomes for students; they’ll be happy to assist with anything to get you a perfect paper.

Frequently Asked Questions

What is the difference between an abstract and an introduction.

An abstract is less than a page long, whereas an introduction is much longer. The introduction chapter is quite detailed, as it introduces the readers to each important and interesting detail. An abstract is unique in that it is used to capture the reader's interest.

How long should an abstract be for a 10000 word dissertation?

If you are writing a 10000-word dissertation, abstracts are typically about 300-350 words long. This is because it contains all the information necessary to understand what your paper is about.

What are the 5 parts of an abstract?

Here are 5 parts of an abstract:

• Research significance
• Methodology

Similar Blogs

• Dissertation Introduction
• Dissertation Topics
• Thesis Introduction
• Thesis Topics
• Thesis Format

GradSchoolGenius is a top-ranked academic writing service. We are home to high-quality academic thesis and dissertations for graduate and post-graduate students worldwide.

• 100% Plagiarism-free Work
• 100% Deadline Driven
• 100% Confidentiality
• 100% Money-back Guarantee
• 15+ Years of Experience
• 500+ Happy Clients
• 500+ Projects Completed
• 24/7 Customer Support

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit