engineer degree thesis

Home > Engineering > Civil and Construction Engineering > Master's Theses

Civil and Construction Engineering Master's Theses

All master’s theses completed through the Graduate College of Western Michigan University since 2012 have been entered into ScholarWorks. Some may be embargoed or restricted by the authors and may be only available from on-campus computers. Print copies from earlier years are available through interlibrary loan. We have a few digital copies of earlier years. If you have any questions, please contact [email protected].

Theses/Dissertations from 2023 2023

Investigating Disparities and Safety Equity in Pedestrian Nighttime Crashes in Michigan , Sia Isaria Mwende

Theses/Dissertations from 2020 2020

Evaluating the Impacts of Building Information Modeling on Construction Change Orders in Iraq , Nehad Alshebbany

Numerical Performance Evaluation of the Wooden Frame Structures with Adhesive Applied Connection under Wind and Seismic Loading , Sharthak Bhandary

Theses/Dissertations from 2018 2018

Establishing Delay-Based Criteria for Installing Traffic Signals at Two-Lane Roundabouts , Oluwaseun Ayomide Adegbaju

From Architectural Design to Structural Analysis: A Data-Driven Approach to Study Building Information Modeling (BIM) Interoperability , Mohammed Aldegeily

Evaluation of Bike Boxes and Protected Intersections with Bicycle Signal Treatments for Improving Safety and Multimodal Mobility at Urban Signalized Intersections , Odai Al Houz

Enabling Robust Distributed Real-Time Hybrid Simulation Method and Expanding Its Applications in Floating Wind Turbine Systems , Mehmet Cinar

Maintaining Deck Profile in Steel I-Girder Bridges During Deck Placement , Ali Naif Inceefe

Theses/Dissertations from 2017 2017

Enhancing Intersection Safety for the Blind and Visually Impaired (BVI) Pedestrian Using Device-to-Infrastructure Communication , Mohammad Sayyah Al-Akash

Visualizing the Constructability of a Steel Structure Using Building Information Modeling and Game Simulation , Mohammed Al Dafaay

Evaluation of Swarm Nodes for Proximity Sensing on Construction Sites , Mohamed Ahmed Madi Binalhaj

Implementing Online Updating to Complex Hysteresis Models in Real- Time Hybrid Simulation Using Constrained Unscented Kalman Filter , Bilal Ahmed Mohammed

Economic Impact Analysis of Bridge Construction , Funda Yavuz

Theses/Dissertations from 2016 2016

Analysis of Pedestrian and Bicycle Crashes in Michigan , Ahmed Abbas Ghubin Al-zubaidi

Comparison of Safety and Operational Performances for Three Engineering Countermeasures , Ali Hamzah Hussein Alzuhairi

Comprehensive Evaluation of the Effectiveness of Pedestrian Countdown Signals on Road Users in Michigan , Richard Atta Boateng

Safety Benefit Analysis of Alternative Delineation Practices in Michigan , Brenda C. Burdick

Verifying Automated Prestressed Concrete Design Software for MDOT Bridge Design Standards , Hussein Kadhim Abood Khalaf

Improved Methodology for Developing Non-Motorized Safety Perfomance Functions , Keneth Morgan Kwayu

Application of Wavelet Transform in Structural Health Monitoring , Yashodhya Swarna Sri Dhanapala Liyana Kankanamge

Analysis of Transit Accessibility for People with Disabilities , Rostam Khalid Mohammed Ameen Qatra

Developing Standard Procedures for Structural Aspects of Slide-in Bridges in Accelerated Bridge Construction (ABC) , Ozan Utku Ridvanoglu

An Equivalent Plate Model with Orthotropic Material Properties for Adjacent Box-Beam Bridge Superstructure , Timothy Alexander Schnell

Transportation System and Its Association with Human Health – A Review and Modeling Approach , Fnu Zahed

Theses/Dissertations from 2015 2015

Evaluation of the Safety Effectiveness of Clearview Font and Fluorescent Yellow Sheeting on Michigan Freeways and Non-Freeways , Lusanni Mercedes Acosta Rodrieuez

Analysis of Mobility Impact for Implementing Complete Streets , Marino Esteban Calderón Díaz

A Microscopic Simulation Approach to Performance Evaluation of Intelligent Transportation System Corridors: A Case in Michigan , Matthew Levi Clark

Fragility Assessment of High-Rise Reinforced Concrete Buildings , Hezha Sadraddin

Theses/Dissertations from 2014 2014

An Integral Framework for Sustainable Building Design , Bushra Asfari

Economic Analysis of Michigan Commercial Vehicle Enforcement Strategies , Randy José Jorge Díaz

Development of Safety Performance Functions for Non-Motorized Traffic Safety , Hamidreza Ahady Dolatsara

Real-Time Hybrid Simulation with Online Model Updating , Adam Mueller

Overtime Traffic Enforcement Evaluation: A Methodology for Selecting Agencies and Enforcement Periods , Dario Enrique Romero Santana

Virtual Analysis and Evaluation of Roundabout Safety and Operational Features , Elisha Jackson Wankogere

Theses/Dissertations from 2013 2013

Spatial Factors Impacting Non-Motorized Exposures and Crash Risks , Farhad Abasahl

Standardized Longitudinal Connection Detail for Decked Precast Prestressed Concrete Girders , Ramzi Muftah Ali Abduallah

Investigating Crash Frequency and Injury Severity at Freeway Fixed Weigh Stations in Michigan , Fathi Salam Mo. Alkhatni

Safety Benefits of Adaptive Traffic Control Systems: A Case Study of Oakland County, MI , Joshua Adam Fink

Evaluation of Point Cloud Data Dispersion with Relation to Point Cloud Density under Field Conditions , Ling Kit Kong

An Automated Approach to Dynamic Site Layout Planning , Duy Huu Nguyen

Cyber-Adaptive Physical Systems for Automated Construction Progress Monitoring and Asset Tracking , Syed Hammad Rasheed

Theses/Dissertations from 2012 2012

The Implementation of a Versatile Pseudodynamic Hybrid Simulation for Seismic Evaluation of Structural Systems , Chelsea Griffith

Regression-Based Prioritization and Data Modeling for Customized Civil Engineering Data Collection , Omar Kanaan

Statistical and Numerical Integrated Approach for Detecting Onset of Prefabricated Bridge Component Connection Deterioration , Cem Mansiz

Structural Health Monitoring of a Bridge Structure Using Wireless Sensor Network , CheeKian Teng

Theses/Dissertations from 2011 2011

Sensor Modeling and Cost Benefit of Using Laser Scanning Technology in AEC , Fahd Saleh Alaswad

Statistical and Visualization Approach for Ranking Factors Affecting NBI Bridge Rating , Saad Aoun Alqahtani

Solar Modeling and Cost-Benefit Analysis of Energy Efficiency Window Arrangements , Wael Muqhim Alruqi

A Comparative Analysis of the Sense of Construction Delays of Experienced and Inexperienced Engineers , Salahedeen A. El Kadeki

Development of a Versatile Hybrid Testing System for Seismic Evaluation of Structural Systems , Griffin Enyart

Selecting an Optimal Construction Alternative through Informed Decision-Making Highway Bridges , Abdul Wahed Mohammed

Theses/Dissertations from 2010 2010

A Computer Model for Sustainable for Life-Cycle Cost Analysis , Sami Ghurmullah Al Ghamdi

Sustainable Universal Design and Zero Energy for Buildings , Ahmad Mohammad Alotaibi

Integration of Sustainability Measure into Highways , Krishna Prasad Dhakal

Investigation of Damage Detection Methods with a Wireless Sensor Network , Mark Joseph Humiecki

Application of Building Information Modeling (BIM) toward Zero Energy High Rise Office Buildings , Moutaz Mohammed Msawealfi

Design Recommendations for High Skew Link Slabs , Michael A. Romkema

Theses/Dissertations from 2009 2009

Optimization Computer Model for Heavy Equipment Selection , Naif Albelwi

Optimal Placement of Traffic Sensors for Traffic Operation and Management , Nahedh M. Alhubail

An Integrated Database Management System and Building Information Modeling for Sustainable Design , Sultan Althobaiti

The Design and Implementation of a Sensor Network System for Concrete Bridge Health Monitoring , Joseph John Barbera

Barrier-Based Evacuation Plan for University Campuses , Asadur Rahman

Highway Construction Staging and Intelligent Traffic Routing: A Cost Optimization Strategy , Richard C. Rhodes

Theses/Dissertations from 2008 2008

Incorporation of Space Syntax Theory in Determining Safe and Efficient Construction Site Layout , Minsuck Cho

Cathodic Protection of Reinforced Concrete Bridge Decks , Joshua Thomas Host

Theses/Dissertations from 2007 2007

Data Fusion Technique for Measuring Intersection Delay Using GPS-Enabled Probe Vehicles , Byung-Hee Han

Development of Knowledge Base of Concrete Bridge Maintenance System , Bahre Karam

Health Monitoring of Concrete Bridges Utilizing Sensor Technology , Ammar Zalt

Theses/Dissertations from 2006 2006

Repair, Inspection and Maintenance Methods of Steel Bridges , Deepak Koirala

Computer Model to Select Leed Certification for Building Projects , Ruba Mirghani Mohammed

Simulation Based Evaluation of Parking Facilities , Niru Tiwari

Theses/Dissertations from 2005 2005

Alkali Silica Reaction in Virgin and Recycles Aggregates: State of the Art and Experimental Investigation using ASTM C 1260 and the Staining Method , Shadi Sami Bajjali

Evaluation of Mechanical Properties of Self-Consolidating Concrete , Bhusan Basnet

Decision Support System for Bridge Maintenance , Imran Fazal

Evaluation of Mechanical Properties of Recycled Aggregate Concrete , Sajjad Ali Khan

The Detection of Common Concrete Bridge Deck Defects Using the Thermography, Impact Echo, and Ground Penetrating Radar , Saleh Z. Nabulsi

Theses/Dissertations from 2004 2004

Oxidation of Titanium in Alpha-Calf Serum Solution , Ali Stait Ismailoglu

Theses/Dissertations from 2003 2003

Mechanical Properties and Corrosion Resistance of NI-SIC NANO Composite Coatings on 2024-T3 Aluminum , Amit Jain

Development of a Redesign Plan for Moore Hall using Architectural Principles of Green Building and Sustainable Design , Alkhaziam Saad

Future Housing in the United States: Senior’s Housing Demand , Sandeep Singh

Innovative Contracting Prequalification/Selecion Model using Analytical Hierarchy Process (AHP) , Saad J. Zidan

Theses/Dissertations from 2002 2002

An Imaging System for Concrete Bridge Inspection , Mohammed Talal Al-Bataineh

A Model for Optimizing the Selection of Project Delivery Systems Using Analytic Hierarchy Process (AHP) , Arosha De Silva

Metastable Phases of Mgo-TiO 2 Solid Solutions , Liang-Chieh Ma

Building Deconstruction Guidelines: Tools for Recovering Building Materials , Ali Ayedh Merzen

Management Commitment to Construction Safety , Areen M. Shaar

Adaptation of Project Finance to Small Contractor Financing , Ragunathan Venkateswaran

Theses/Dissertations from 2001 2001

Structural Studies of Metastable Nanocrystalline Magnesium Titanate Ceramics , Renmei Xu

Theses/Dissertations from 2000 2000

Texture and Young’s Modulus of Nickel/Gamma-Alumina Composites , Abdulaziz Alamr

CFMMS – Computerized Facilities Maintenance Management System , Prawit Rotsawatsuk

Learning Reinforced Concreyte Design Principles Using a Java-VRML based Design Studio , Amarneethi Vamadevan

Theses/Dissertations from 1999 1999

Quantitative, Non-Destructive Calibration of Scanned Probe Microscope Cantilevers , John Hazel

Development of Mechanical Properties Micromapping for Composite Polymer Systems , Zheng Huang

Intellicrances – A Neural Network-Based Crane Selection System , André T. Mund

Conform- A Computerized Job-Built Concrete Construction Formwork Design , Kajpong Pongponrat

ScholarWorks

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Author Corner

• Civil and Construction Engineering

Western Michigan University Libraries, Kalamazoo MI 49008-5353 USA | (269) 387-5611

Home | About | FAQ | My Account | Accessibility Statement

Privacy | Copyright

ScholarWorks

Home > Engineering > Civil Engineering > CIVILENG_GRADPROJ

Civil Engineering Graduate Projects and Theses

Theses/dissertations from 2023 2023.

Systematic Investigation of Wavy Surface Roughness Profiles Using Common Roughness Algorithms , Russell Gray

Hydraulic Conductivity's Impact on Rise of Excess Pore-Water Pressure During Seismic-Induced Liquefaction , Holly Gunderson

Multiphysics Numerical Modeling for PFAS Transport within Vadose and Saturated Zones , Pierrette Iradukunda

Investigating the Causes of a Landslide in Terra Nativa Subdivision and Designing Slope Stabilization Using Recycled Plastic Pins , Clara Klamm

Analyzing the Effects of Rejuvenators in Balanced Mix Design with High Percentages of Recycled Asphalt Pavement , Amanda Jo Mullins

Maximizing the Performance of Geocell Reinforced Pavement Bases with High-Fines Content Soils Through MICP Treatments , Ajay Kumar Reddy Pisati

Study of Dry Mixing Method to Apply Microbial-Induced Calcite Precipitation for Soil Treatment , Ruchi Shrestha

Analysis of Emerging Constituents in an Activated Sludge Treatment Facility , Abigail Mae Sigurdson Ryan

Development of Predictive Rockfall Runout Maps Based on Calibrated Rockfall Models , Olivia Tabor

Theses/Dissertations from 2022 2022

Contaminants of Emerging Concern Behavior within Water Renewal Facilities , Joshua C. Baker

Evaluation of Energy Release from Wildfires Across the Elevation Gradient , Isabelle Rose Butler

Use of Harsh-Braking Data from Connected Vehicles as a Surrogate Safety Measure , Nathaniel Patrick Edelmann

Innovative Foundation Alternative Inspired from Tree Roots , Macie Larranaga

Multivariate Analysis of the 2021 Boise Drought in the Context of Natural Human Systems , Jesus Martinez-Osario

Using Food-Industry Byproduct to Treat Expansive Clay , Nicole L. Shaw

Theses/Dissertations from 2021 2021

Developing Implementable Policies Targeting Sustainable Building Construction Through International Policy Diffusion , Melisa Ciara Hancock

Using Differential Shear Strain Measurements to Monitor Crosstie Support Conditions in Railroad Tracks , D. Kody Johnson

Water Quality Responses to a Semi-Arid Beaver Meadow in Boise, Idaho , Luise Bayer Winslow

Theses/Dissertations from 2020 2020

Quantifying the Effects of Climate Change on Pavement Performance Prediction using AASHTOWare Pavement ME Design , Md Shahjalal Chowdhury

In-situ Fluid Injections to Achieve Bio-Stimulated Calcite Precipitation in Expansive Soils , Anish Pathak

Understanding Mesoscopic Chemo-Mechanical Distress and Mitigation Mechanisms of Concrete Subject to ASR , Md Asif Rahman

Assessing the Prevalence of Suspicious Activities in Asphalt Pavement Construction Using Algorithmic Logics and Machine Learning , Mostofa Najmus Sakib

Theses/Dissertations from 2019 2019

Wildfire Smoke: Trends, Challenges, Unknowns, and Human Response , Mariah Dawn Fowler

Full-Scale Study of Infrared Thermography for Assessing Surface and Subsurface Defects in Pavements and Other Civil Infrastructure , Aidin J. Golrokh

Exploring the Use of Data from Newer Technologies in Road Design , Mahamudul Hasan

Effect of Subgrade Conditions on Pavement Analysis and Performance Prediction: A Study for Idaho Conditions , Md Jibon

A Unified Risk-Based Framework for Assessing Sustainability and Resiliency of Civil Infrastructure , Thomas Adam Robbins

Theses/Dissertations from 2018 2018

Feasibility of Aerial Tramway at Boise State University , Majed Alsaqyani

Predicting Power Transformer Bushings' Seismic Vulnerability , Jonathan Bender

Effect of Particle Breakage on Ballast Permanent Deformation — A Study Using the Discrete Element Method , Beema Dahal

Machine Learning Methods to Map Stabilizer Effectiveness Based on Common Soil Properties , Amit Gajurel

Physio-Chemical Degradation of Concrete: A Ramification of Coupled Freeze-Thaw and Sulfate Attack , MD Aminul Islam

Studying the Applicability of Biostimulated Calcite Precipitation in Stabilizing Expansive Soils , Md Touhidul Islam

Effect of Subsurface Conditions on Flexible Pavement Behavior: Non-Destructive Testing and Mechanistic Analysis , Md. Fazle Rabbi

Studying the Use of Microbial Induced Calcite Precipitation as a Shallow Stabilization Alternative to Treat Expansive Soils , Tasria Rahman

Theses/Dissertations from 2017 2017

Subsurface Characterization of Flexible Pavements Constructed Over Expansive Soil Subgrades and Selection of Suitable Rehabilitation Alternatives , Kazi Moinul Islam

Effect of Particle Size Distribution and Packing Characteristics on Railroad Ballast Shear Strength: A Numerical Study Using the Discrete Element Method , S. M. Naziur Mahmud

Evaluating the Effectiveness of a Hybrid Geosynthetic Reinforcement System to Mitigate Differential Heave on Flexible Pavement due to Expansive Subgrades , Mir Md. Tamim

Theses/Dissertations from 2016 2016

Electromagnetically Induced Alteration of Hydraulic Conductivity of Coarse-Grained Soils for Geotechnical Applications , Rakesh Acharya

Evaluating the Suitability of Microbial Induced Calcite Precipitation Technique for Stabilizing Expansive Soils , Sikha Neupane

Evaluating the Effects of Major Assumptions in Layered Elastic Theory on Railroad Track Response Prediction Through the Development of an Improved Track Analysis Software , Sadichchha Sharma

Coupled Numerical Analysis of Variations in the Capacity of an Energy Pile in Clay Soil , Daniel Patrick Zimmerman

Theses/Dissertations from 2015 2015

Impedance-Based Water-Quality Monitoring Using Parallel Plate Method , Ali Nazaridaftari

Theses/Dissertations from 2014 2014

Electromagnetically Induced Remediation of Contaminated Soil , Vahab Bolvardi

The Effect of Electromagnetic Waves on Airflow During Air Sparging , Somayeh Najafi

Dual-State Kalman Filter Forecasting and Control Theory Applications for Proactive Ramp Metering , Brian Richard Portugais

Theses/Dissertations from 2013 2013

Investigation of Human-Induced Land Use Changes Under Present and Future Climate Projections in Southern Idaho , Korri Allen Anderson

Electromagnetic Alteration of Hydraulic Conductivity of Soils , Sahba Azad

An Investigation into the Water Budget and the Management of the Snake River System , John Whitney Hildreth

A New Framework for Flooding Control in Regulated River Systems , Elizabeth Akemi Kanashiro

Theses/Dissertations from 2012 2012

Analysis of Electromagnetic Stimulation of Transport in Water for Geoenvironmental Applications , Mahsa Azad

Theses/Dissertations from 2011 2011

A System Dynamics Approach for Climate Change Impact Analysis in the Snake River Basin , David Jerome Hoekema

Assessing the Surface Energy Balance Components in the Snake River Basin , W Thilini Ajanthik Jaksa

Investigation of Concrete Sealer Products to Extend Concrete Pavement Life , Justin Nielsen

EM Stimulation of Water for Geotechnical Applications , Harlan Dwight Olson Sangrey

Laser Particulate Counter Calibration to a Micro-Orifice Uniform-Deposit Impactor , Benjamen Fredrich Seely

Theses/Dissertations from 2010 2010

Impact of Ground-level Aviation Emissions on Air Quality in the Western United States , Eric Edward Clark

Factors Influencing Soil Moisture at the Hillslope Scale in a Semi-Arid Mountainous Environment , Ivan John Geroy

Identifying Controls on Surface Carbon Dioxide Efflux in a Semi-Arid Ecosystem , Katrina Elsie Ladd

Pharmaceuticals and Personal Care Products in Ground Water from Municipal Lagoon Treatment , Teresa Nicholas

Theses/Dissertations from 2007 2007

Design and Validation of an Automated Multistep Outflow Apparatus for Measuring Soil Hydraulic Properties , Jordi Figueras

Theses/Dissertations from 2006 2006

Integrated Transportation and Land Use Modeling for the Boise Metropolitan Area , Suseel Dev Indrakanti

A Gas Sampling Module for a Subsurface Ion Mobility Spectrometer , Kevin P. Ryan

Theses/Dissertations from 2005 2005

Development of a Queue Growth and Dissipation Model , Wei Wang

Theses/Dissertations from 2002 2002

Changes in Local Groundwater Elevation Following Stream Restoration in the Lower Red River Meadow, Idaho , Kenneth Douglas Donley

• Collections
• Disciplines
• SelectedWorks Gallery
• Albertsons Library
• Division of Research
• Graduate College

Advanced Search

• Notify me via email or RSS

Author Corner

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

Edinburgh Research Archive

•   ERA Home
• Engineering, School of

Engineering thesis and dissertation collection

By Issue Date Authors Titles Subjects Publication Type Sponsor Supervisors

Search within this Collection:

Recent Submissions

Hardware-accelerated laser absorption spectroscopy for reactive-flow diagnosis , 3d printed platform stationary phases for downstream processing: development of porous platform inks, characterization of 3d printed chromatography columns and testing for industrial bioprocessing , machine learning for predictable design of yeast promoters , microwave sensing system for portable and wearable neurodegenerative disease monitoring , design and scaling of low speed, high-torque switched reluctance machines for wind energy , practical computational modelling techniques for floating offshore wind turbine support structures , sustainable additive manufacturing of polymer membranes for desalination and organic solvent nanofiltration , rational design and synthesis of metal-organic frameworks and their composite materials with tunable structural properties and enhanced chemical stability , sipm-based photon counting receiver for low energy optical wireless communication , fluidic logic for the control and design of soft robotic systems , deployment of fenton and photo-fenton processes for the treatment of municipal and industrial wastewater , radioisotope identification with neuromorphic methodology: different solutions and evaluations , application of machine learning techniques and high-resolution satellite imagery for the extraction of shoreline indicators and the prediction of future shorelines , design and analysis of new surface wave antennas for cubesat and other small satellites , grouted sleeve connectors in precast rc construction: methods of analysis and structural effects , geology-informed bayesian tomographic imaging using geochemical and seismic data , development of hybrid compounds for compression moulding for structural composites , metal organic frameworks for greenhouse gas capture: from atomic-level understanding to device design using computational methods , new strategies for the synthesis of hypercrosslinked polymers (hcps) applied in separation proces , complex pipeline analysis using sparse synthetic data .

Achieving Success with the Engineering Dissertation

• © 2020
• Petra Gratton 0 ,
• Guy Gratton 1

Department of Mechanical and Aerospace Engineering, Brunel University London, Uxbridge, UK

You can also search for this author in PubMed   Google Scholar

School of Aerospace, Transport and Manufacturing, Cranfield University, Cranfield, UK

• Aimed at all engineering students conducting both major projects and dissertations
• Includes advice on engaging with external project clients
• Relates the dissertation to future job searches and success
• Lists opportunities to engage with national or international competitions

11k Accesses

7 Altmetric

This is a preview of subscription content, log in via an institution to check access.

Access this book

Subscribe and save.

• Get 10 units per month
• Download Article/Chapter or eBook
• 1 Unit = 1 Article or 1 Chapter
• Cancel anytime
• Available as EPUB and PDF
• Read on any device
• Instant download
• Own it forever
• Compact, lightweight edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info
• Durable hardcover edition

Tax calculation will be finalised at checkout

Other ways to access

Licence this eBook for your library

Institutional subscriptions

About this book

The dissertation is the single most important component of an engineering degree, not only carrying the most marks, but bridging from academic study to professional practice. Achieving Success with the Engineering Dissertation describes the different types of dissertation, how to pick the best project and how a student can prepare themselves to succeed with their own dissertation.

Achieving Success with the Engineering Dissertation will be of use to both undergraduate and postgraduate students in all fields of Engineering, and to their supervisors.

Similar content being viewed by others

Persistent Myths About Dissertation Writing and One Proven Way of Breaking Free of Their Spell

“I Really Enjoy the Hectic Multitude of Jobs I Get to Complete in Any One Day”

Decades of Alumni: Perspectives on the Impact of Project-Based Learning on Career Pathways and Implications for Design Education

• Engineering Dissertation
• Technical Writing
• Project Success
• Presentation of Data
• Dissertation Competitions
• Research Project
• Design and Build
• Student Project with External Clients
• Engineering Student Projects
• How to Choose Engineering Project
• Design Based Dissertation
• Dissertation and Employability

Table of contents (16 chapters)

Front matter, what is the dissertation.

• Petra Gratton, Guy Gratton

Objectives and Expectations

How to be the student who achieves success, selecting the project, the opening literature review, the project plan, designing the dissertation, acting professionally, presenting data, presenting engineering analysis, drawing and presenting conclusions, making recommendations, the dissertation and the job, publishing onwards, back matter, authors and affiliations.

Petra Gratton

Guy Gratton

About the authors

Bibliographic information.

Book Title : Achieving Success with the Engineering Dissertation

Authors : Petra Gratton, Guy Gratton

DOI : https://doi.org/10.1007/978-3-030-33192-4

Publisher : Springer Cham

eBook Packages : Engineering , Engineering (R0)

Copyright Information : Springer Nature Switzerland AG 2020

Hardcover ISBN : 978-3-030-33191-7 Published: 23 January 2020

Softcover ISBN : 978-3-030-33194-8 Published: 23 January 2021

eBook ISBN : 978-3-030-33192-4 Published: 22 January 2020

Edition Number : 1

Number of Pages : XV, 279

Number of Illustrations : 53 b/w illustrations, 26 illustrations in colour

Topics : Job Careers in Science and Engineering , Thesis and Dissertation , Engineering/Technology Education

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• DSpace@MIT Home
• MIT Libraries

Undergraduate Theses

Theses by department.

• Department of Aeronautics and Astronautics
• Department of Architecture
• Department of Biological Engineering
• Department of Biology
• Department of Brain and Cognitive Sciences
• Department of Chemical Engineering
• Department of Chemistry
• Department of Civil and Environmental Engineering
• Department of Earth, Atmospheric, and Planetary Sciences
• Department of Economics
• Department of Electrical Engineering and Computer Sciences
• Department of Humanities
• Department of Materials Science and Engineering
• Department of Mathematics
• Department of Mechanical Engineering
• Department of Nuclear Science and Engineering
• Department of Ocean Engineering
• Department of Physics
• Department of Political Science
• Department of Urban Studies and Planning
• Engineering Systems Division
• Operations Research Center
• Program in Writing and Humanistic Studies
• Science, Technology & Society
• Sloan School of Management
• System Design & Management

Recent Submissions

Our system of coal mining 

Description of a geological section in Addison Co., Vermont 

Report on Winamuck lead ore 

Show Statistical Information

• USF Research
• USF Libraries

Digital Commons @ USF > College of Engineering > Mechanical Engineering > Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2024 2024.

Under Pressure: The Soft Robotic Clap-and-Fling of Cuvierina atlantica , Daniel Mead

Human Motion-Inspired Inverse Kinematics Algorithm for a Robotics-Based Human Upper Body Model , Urvish Trivedi

Theses/Dissertations from 2023 2023

Metachronal Locomotion: Swimming, Scaling, and Schooling , Kuvvat Garayev

A Human-in-the-Loop Robot Grasping System with Grasp Quality Refinement , Tian Tan

Theses/Dissertations from 2022 2022

Fragmentation of Chemically Herded Oil Slicks by Obstacles: Visualizations, Flow Measurements, and Spatial Distributions , Ali Alshamrani

Bulk Glass as Compressive Reinforcement in Structural Elements , John Cotter

Health Effects of Oil Spills and Dispersal of Oil Droplets and Zooplankton by Langmuir Cells , Sanjib Gurung

Interaction of Sequentially Applied Interventions for Gait Symmetry , Adila Hoque

4D Printing of Smart Hydrogel Scaffold to Program Neural Stem Cell Differentiation , Omar Khater

Estimating the As-Placed Grout Volume of Auger Cast Piles , Tristen Mee

Quantifying Functional Performance of Manual Force Perception and Dynamic Force Control , Benjamin Rigsby

Hybrid RANS-LES Hemolytic Power Law Modeling of the FDA Blood Pump , Joseph Tarriela

Theses/Dissertations from 2021 2021

Dynamic Loading Directed Neural Stem Cell Differentiation , Abdullah Revaha Akdemir

An Investigation of Cross-links on Crystallization and Degradation in a Novel, PhotoCross-linkable Poly (Lactic Acid) System , Nicholas Baksh

A Framework to Aid Decision Making for Smart Manufacturing Technologies in Small-and Medium-Sized Enterprises , Purvee Bhatia

Formation of Gas Jets and Vortex Rings from Bursting Bubbles: Visualization, Kinematics, and Fluid Dynamics , Ali A. Dasouqi

Development of Carbon and Silicon Carbide Based Microelectrode Implantable Neural Interfaces , Chenyin Feng

Sulfate Optimization in the Cement-Slag Blended System Based on Calorimetry and Strength Studies , Mustafa Fincan

Interrelation of Thermal Stimulation with Haptic Perception, Emotion, and Memory , Mehdi Hojatmadani

Modeling the Ambient Conditions of a Manufacturing Environment Using Computational Fluid Dynamics (CFD) , Yang Liu

Flow Visualization and Aerosol Characterization of Respiratory Jets Exhaled from a Mannequin Simulator , Sindhu Reddy Mutra

A Constitutive-Based Deep Learning Model for the Identification of Active Contraction Parameters of the Left Ventricular Myocardium , Igor Augusto Paschoalotte Nobrega

Sensible/Latent Hybrid Thermal Energy Storage for the Supercritical Carbon Dioxide Brayton Cycle , Kelly Osterman

Evaluating the Performance of Devices Engineering to Quantify the FARS Test , Harsh Patel

Event-Triggered Control Architectures for Scheduling Information Exchange in Uncertain and Multiagent Systems , Stefan Ristevski

Theses/Dissertations from 2020 2020

Experimental Investigation of Liquid Height Estimation and Simulation Verification of Bolt Tension Quantification Using Surface Acoustic Waves , Hani Alhazmi

Investigation of Navigation Systems for Size, Cost, and Mass Constrained Satellites , Omar Awad

Simulation and Verification of Phase Change Materials for Thermal Energy Storage , Marwan Mosubah Belaed

Control of a Human Arm Robotic Unit Using Augmented Reality and Optimized Kinematics , Carlo Canezo

Manipulation and Patterning of Mammalian Cells Using Vibrations and Acoustic Forces , Joel Cooper

Stable Adaptive Control Systems in the Presence of Unmodeled and Actuator Dynamics , Kadriye Merve Dogan

The Design and Development of a Wrist-Hand Orthosis , Amber Gatto

ROBOAT - Rescue Operations Bot Operating in All Terrains , Akshay Gulhane

Mitigation of Electromigration in Metal Interconnects Passivated by Ångstrom-Thin 2D Materials , Yunjo Jeong

Swimming of Pelagic Snails: Kinematics and Fluid Dynamics , Ferhat Karakas

Functional Gait Asymmetries Achieved Through Modeling and Understanding the Interaction of Multiple Gait Modulations , Fatemeh Rasouli

Distributed Control of Multiagent Systems under Heterogeneity , Selahattin Burak Sarsilmaz

Design and Implementation of Intuitive Human-robot Teleoperation Interfaces , Lei Wu

Laser Micropatterning Effects on Corrosion Resistance of Pure Magnesium Surfaces , Yahya Efe Yayoglu

Theses/Dissertations from 2019 2019

Synthesis and Characterization of Molybdenum Disulfide/Conducting Polymer Nanocomposite Materials for Supercapacitor Applications , Turki S. Alamro

Design of Shape-Morphing Structures Consisting of Bistable Compliant Mechanisms , Rami Alfattani

Low Temperature Multi Effects Desalination-Mechanical Vapor Compression Powered by Supercritical Organic Rankine Cycle , Eydhah Almatrafi

Experimental Results of a Model Reference Adaptive Control Approach on an Interconnected Uncertain Dynamical System , Kemberly Cespedes

Modeling of Buildings with Electrochromic Windows and Thermochromic Roofs , Hua-Ting Kao

Design and Testing of Experimental Langmuir Turbulence Facilities , Zongze Li

Solar Thermal Geothermal Hybrid System With a Bottoming Supercritical Organic Rankine Cycle , Francesca Moloney

Design and Testing of a Reciprocating Wind Harvester , Ahmet Topcuoglu

Distributed Spatiotemporal Control and Dynamic Information Fusion for Multiagent Systems , Dzung Minh Duc Tran

Controlled Wetting Using Ultrasonic Vibration , Matthew A. Trapuzzano

On Distributed Control of Multiagent Systems under Adverse Conditions , Emre Yildirim

Theses/Dissertations from 2018 2018

Synthesis and Characterization of Alpha-Hematite Nanomaterials for Water-Splitting Applications , Hussein Alrobei

Control of Uncertain Dynamical Systems with Spatial and Temporal Constraints , Ehsan Arabi

Simulation and Optimization of a Sheathless Size-Based Acoustic Particle Separator , Shivaraman Asoda

Simulation of Radiation Flux from Thermal Fluid in Origami Tubes , Robert R. Bebeau

Toward Verifiable Adaptive Control Systems: High-Performance and Robust Architectures , Benjamin Charles Gruenwald

Developing Motion Platform Dynamics for Studying Biomechanical Responses During Exercise for Human Spaceflight Applications , Kaitlin Lostroscio

Design and Testing of a Linear Compliant Mechanism with Adjustable Force Output , William Niemeier

Investigation of Thermal History in Large Area Projection Sintering, an Additive Manufacturing Technology , Justin Nussbaum

Acoustic Source Localization with a VTOL sUAV Deployable Module , Kory Olney

Defect Detection in Additive Manufacturing Utilizing Long Pulse Thermography , James Pierce

Design and Testing of a Passive Prosthetic Ankle Foot Optimized to Mimic an Able-Bodied Gait , Millicent Schlafly

Simulation of Turbulent Air Jet Impingement for Commercial Cooking Applications , Shantanu S. Shevade

Materials and Methods to Fabricate Porous Structures Using Additive Manufacturing Techniques , Mohsen Ziaee

Theses/Dissertations from 2017 2017

Large Area Sintering Test Platform Design and Preliminary Study on Cross Sectional Resolution , Christopher J. Gardiner

Enhanced Visible Light Photocatalytic Remediation of Organics in Water Using Zinc Oxide and Titanium Oxide Nanostructures , Srikanth Gunti

Heat Flux Modeling of Asymmetrically Heated and Cooled Thermal Stimuli , Matthew Hardy

Simulation of Hemiparetic Function Using a Knee Orthosis with Variable Impedance and a Proprioception Interference Apparatus , Christina-Anne Kathleen Lahiff

Synthesis, Characterization, and Application of Molybdenum Oxide Nanomaterials , Michael S. McCrory

Effects of Microstructure and Alloy Concentration on the Corrosion and Tribocorrosion Resistance of Al-Mn and WE43 Mg Alloys , Hesham Y. Saleh Mraied

Novel Transducer Calibration and Simulation Verification of Polydimethylsiloxane (PDMS) Channels on Acoustic Microfluidic Devices , Scott T. Padilla

Force Compensation and Recreation Accuracy in Humans , Benjamin Rigsby

Experimental Evaluation of Cooling Effectiveness and Water Conservation in a Poultry House Using Flow Blurring ® Atomizers , Rafael M. Rodriguez

Media Velocity Considerations in Pleated Air Filtration , Frederik Carl Schousboe

Orthoplanar Spring Based Compliant Force/Torque Sensor for Robot Force Control , Jerry West

Experimental Study of High-Temperature Range Latent Heat Thermal Energy Storage , Chatura Wickramaratne

Theses/Dissertations from 2016 2016

Al/Ti Nanostructured Multilayers: from Mechanical, Tribological, to Corrosion Properties , Sina Izadi

Molybdenum Disulfide-Conducting Polymer Composite Structures for Electrochemical Biosensor Applications , Hongxiang Jia

Waterproofing Shape-Changing Mechanisms Using Origami Engineering; Also a Mechanical Property Evaluation Approach for Rapid Prototyping , Andrew Jason Katz

Hydrogen Effects on X80 Steel Mechanical Properties Measured by Tensile and Impact Testing , Xuan Li

Application and Analysis of Asymmetrical Hot and Cold Stimuli , Ahmad Manasrah

Droplet-based Mechanical Actuator Utilizing Electrowetting Effect , Qi Ni

Experimental and Computational Study on Fracture Mechanics of Multilayered Structures , Hai Thanh Tran

Designing the Haptic Interface for Morse Code , Michael Walker

Optimization and Characterization of Integrated Microfluidic Surface Acoustic Wave Sensors and Transducers , Tao Wang

Corrosion Characteristics of Magnesium under Varying Surface Roughness Conditions , Yahya Efe Yayoglu

Theses/Dissertations from 2015 2015

Carbon Dioxide (CO 2 ) Emissions, Human Energy, and Cultural Perceptions Associated with Traditional and Improved Methods of Shea Butter Processing in Ghana, West Africa , Emily Adams

Experimental Investigation of Encapsulated Phase Change Materials for Thermal Energy Storage , Tanvir E. Alam

Design Of Shape Morphing Structures Using Bistable Elements , Ahmad Alqasimi

Heat Transfer Analysis of Slot Jet Impingement onto Roughened Surfaces , Rashid Ali Alshatti

Systems Approach to Producing Electrospun Polyvinylidene Difluoride Fiber Webs with Controlled Fiber Structure and Functionality , Brian D. Bell

Self-Assembly Kinetics of Microscale Components: A Parametric Evaluation , Jose Miguel Carballo

Measuring Polydimethylsiloxane (PDMS) Mechanical Properties Using Flat Punch Nanoindentation Focusing on Obtaining Full Contact , Federico De Paoli

A Numerical and Experimental Investigation of Flow Induced Noise In Hydraulic Counterbalance Valves , Mutasim Mohamed Elsheikh

An Experimental Study on Passive Dynamic Walking , Philip Andrew Hatzitheodorou

Use of Anaerobic Adhesive for Prevailing Torque Locking Feature on Threaded Product , Alan Hernandez

Viability of Bismuth as a Green Substitute for Lead in Jacketed .357 Magnum Revolver Bullets , Joel A. Jenkins

A Planar Pseudo-Rigid-Body Model for Cantilevers Experiencing Combined Endpoint Forces and Uniformly Distributed Loads Acting in Parallel , Philip James Logan

Kinematic Control of Redundant Mobile Manipulators , Mustafa Mashali

Passive Symmetry in Dynamic Systems and Walking , Haris Muratagic

Mechanical Properties of Laser-Sintered-Nylon Diamond Lattices , Clayton Neff

Advanced Search

• Email Notifications and RSS
• All Collections
• USF Faculty Publications
• Open Access Journals
• Conferences and Events
• Theses and Dissertations
• Textbooks Collection

Useful Links

• Rights Information
• SelectedWorks
• Submit Research

Home | About | Help | My Account | Accessibility Statement | Language and Diversity Statements

Privacy Copyright

Master's Thesis Program Overview - School of Industrial Engineering - Purdue University

Program Overview

The Master's degree with a thesis option allows students to work with world-renowned faculty to dig deeper in an area of interest. The development of a thesis involves utilizing the knowledge gained in a sub-field of study (e.g., human factors) to a novel engineering problem. In addition, students deepent their competence in surveying cutting-edge research, leading a project independently, design (especially in emerging fields), and communication. 

A thesis is a major undertaking, requiring deep interest in the subject matter and a close relationship with the faculty member supervising the research. Prospective students are encouraged to consider the research profiles of IE faculty, including recent publications, to determine program fit. Pursuing a thesis-option Master's degree is often a step toward pursuing a Doctor of Philosophy degree, and may be required for admission to some doctoral programs. However, the skills gained through completing a thesis-option Master's program still are highly sought after in industry. Students who intend to earn the doctoral degree must pursue this option. 

Prospective Thesis Master's students are encouraged to consult with faculty members with whom their interests align prior to applying for admission.  You can learn about our  research areas and the faculty doing work in them here , and can directly peruse faculty profiles via our  IE Faculty Directory .

Program Highlights 

• Ranking . Consistently ranked in the top #10 by U.S. News & World Report (April 2023).
• Enrollment & Statistics . A total of 9407 students from abroad, representing 127* countries and 1514 international faculty and staff representing 84* nations, claim Purdue University as their home this fall semester.
• Two-year program:  Students complete a combination of advanced technical courses, focusing their studies on areas of interest, culminating in a Master of Science in Industrial Engineering degree.
• Career Catalyzation:  Graduates pursue diverse careers, often on advanced leadership tracks.
• Degree Requirements:  Courses selected for the thesis option are intended to provide in-depth study in a specific area of interest. Prerequisites ensure a minimum level of knowledge in the general field of industrial engineering. The curriculum allows for significant student choice in coursework, which should be made in consultation with the faculty member supervising the research project to ensure alignment with the research topic.
• Human Factors Engineering
• Manufacturing Systems Engineering
• Operational Research (Mathematical Programming; Simulation & Stochastic Processes)
• Production Systems Engineering
• Thesis/Defense:  Development of a thesis document meeting all requirements of the faculty and Graduate School, followed by a successful oral defense of the thesis before a committee of faculty members.

Why Industrial Engineering?

Increased Employment Opportunities:  A master's thesis degree is traditionally for students planning to continue in research or academia. However, this research-focused program also equips students with technical skills highly sought after in industry, such as decision making, systems engineering, operations, and oral and written communications.

Increased Earning Potential:  Purdue Industrial Engineering Master's graduates report earning 15% or more than their peers with a Bachelor's degree.

Field Defining Innovation & Research:  The School of Industrial Engineering has been shaping the field and educating future leaders in industrial engineering for 65 years. The graduate program is ranked in the top 10, and the IE online degree program is ranked #1 in the nation. Our researchers conduct field-defining research that is recognized worldwide for its impact and quality.

Excellence at Scale:  As one of the top 10 engineering graduate programs in the nation, Purdue's College of Engineering is one of the largest and strongest programs in the nation with 13 different schools and departments.

Affordable Tuition:  Our program's tuition is significantly cost-effective compared to other programs.

Low Cost of Living:  The cost of living in the Greater Lafayette-West Lafayette area is among the lowest in the nation, with housing rent ranging from 23% to 179% less expensive than competing university cities (numbeo.com).

Funding Resources: There are several funding options for Purdue graduate students to explore, including  assistantships ,  fellowships ,  grants ,  loans and other financial aid . Financial support for graduate students at Purdue is primarily awarded in the form of assistantships and fellowships. Over 60 percent of graduate students at the University are on assistantships. Furthermore, the Fellowship Office hosts many  resources  for students applying for fellowships.

Most funding decisions for assistantships are made by each individual graduate program. 

Degree Requirements 

Minimum 30 Total Credit Hours

• 21 credit hours of coursework
• At least 12 credit hours must come from IE-listed courses
• A minimum of 9 credit hours of master's thesis research credits (IE 69800)
• Advisory committee
• Development of a thesis document meeting all requirements of the faculty and Graduate School
• Successful defense of the thesis through an oral examination to a committee of faculty members

Graduate Program Student Guide : New, Returning & Online Student Resources, Plan of Study & Course Requirements for Master's Thesis , Final Examination Guidelines for Master's Thesis , Completion Guidelines for Master's Thesis , Academic Calendars, and more

Tuition & Fees

See  Graduate Tuition and Fees  for access to detailed information regarding Purdue tuition, rates and fees for graduate students, including summer, fall/spring and winter rate information as well as other case-specific fees that may not be included with the seasonal fee information.

Application Requirements

Prospective Student Events

Contact 

IE Graduate Office: [email protected]

Heather Bagshaw

Sr. Graduate Program Administrator

+1 765 494-0680

[email protected]

• Senior Thesis

For an A.B. degree, a research thesis is strongly encouraged but not required; a thesis is necessary to be considered for High or Highest Honors. Additionally, a thesis will be particularly useful for students interested in pursuing graduate engineering research. 

In the S.B. degree programs, every student completes a design thesis as part of the required senior capstone design course (ES 100hf). During the year-long course students design and prototype a solution to an engineering problem of their own choice.

The guide below provides an overview of the requirement for an A.B. thesis in Mechanical Engineering:

• Engineering A.B. Thesis Guide

Some recent thesis examples across all of SEAS can be found on the Harvard DASH (Digital Access to Scholarship at Harvard) repository .

Mechanical Engineering Senior thesis examples:

• Prototyped a mug to keep tea the perfect drinking temperature using a novel wax substrate for thermal control

Engineering A.B. Thesis Extensions and Late Submissions

Thesis extensions will only be granted in extraordinary circumstances, such as hospitalization or grave family emergency. An extension may only be granted by the DUS (who may consult with thesis advisor, resident dean, and readers). For joint concentrators, the other concentration should also support the extension. To request an extension, please email your ADUS or DUS, ideally several business days in advance. Please note that any extension must be able to fall within our normal grading, feedback, and degree recommendation deadline, so extensions of more than a few days are usually impossible.

Late submissions of thesis work will not be accepted. A thesis is required for joint concentrators, and a late submission will prevent a student from fulfilling this requirement. Please plan ahead and submit your thesis by the required deadline.

Senior Thesis Submission Information for A.B. Programs

Senior A.B. theses are submitted to SEAS and made accessible via the Harvard University Archives and optionally via  DASH  (Digital Access to Scholarship at Harvard), Harvard's open-access repository for scholarly work.

In addition to submitting to the department and thesis advisors & readers, each SEAS senior thesis writer will use an online submission system to submit an electronic copy of their senior thesis to SEAS; this electronic copy will be kept at SEAS as a non-circulating backup. Please note that the thesis won't be published until close to or after the degree date. During this submission process, the student will also have the option to make the electronic copy publicly available via DASH.  Basic document information (e.g., author name, thesis title, degree date, abstract) will also be collected via the submission system; this document information will be available in  HOLLIS , the Harvard Library catalog, and DASH (though the thesis itself will be available in DASH only if the student opts to allow this). Students can also make code or data for senior thesis work available. They can do this by posting the data to the Harvard  Dataverse  or including the code as a supplementary file in the DASH repository when submitting their thesis in the SEAS online submission system.

Whether or not a student opts to make the thesis available through DASH, SEAS will provide an electronic record copy of the thesis to the Harvard University Archives. The Archives may make this record copy of the thesis accessible to researchers in the Archives reading room via a secure workstation or by providing a paper copy for use only in the reading room.  Per University policy , for a period of five years after the acceptance of a thesis, the Archives will require an author’s written permission before permitting researchers to create or request a copy of any thesis in whole or in part. Students who wish to place additional restrictions on the record copy in the Archives must contact the Archives  directly, independent of the online submission system. 

Students interested in commercializing ideas in their theses may wish to consult Dr. Fawwaz Habbal , Senior Lecturer on Applied Physics, about patent protection. See Harvard's policy for information about ownership of software written as part of academic work.

In Materials Science & Mechanical Engineering

• Undergraduate Engineering at Harvard
• Concentration Requirements
• How to Declare
• Who are my Advisors?
• Sophomore Forum
• ABET Information
• Research for Course Credit (ES 91R)
• AB/SM Information
• Peer Concentration Advisors (PCA) Program
• Student Organizations
• How to Apply
• PhD Timeline
• PhD Model Program (Course Guidelines)
• Qualifying Exam
• Committee Meetings
• Committee on Higher Degrees
• Research Interest Comparison
• Collaborations
• Cross-Harvard Engagement
• Clubs & Organizations
• Centers & Initiatives
• Alumni Stories
• History of Engineering Mechanics

Mechanical Engineering: Find Theses and Dissertations

• Starting Point
• Find Reference Sources
• Find Books and ebooks
• Find Journals
• Find Articles
• Find Facts & Formulas
• Find Properties of Materials
• Find Patents and Trademarks
• Find Technical Reports
• Find Theses and Dissertations
• Find Conferences
• Track a Citation
• Writing & Citing
• Associations and Societies
• Guidance for Authors of ASME Literature

About Theses and Dissertations

A dissertation or thesis is a document submitted in support of candidature for a degree or professional qualification presenting the author's research and findings.  (International Standard ISO 7144: Documentation — Presentation of theses and similar documents ).

For most universities in the U.S., dissertation is the term for the required submission for the PhD, and thesis refers only to the master's degree requirement.

Other Universities

T he best source to find theses is ProQuest Dissertations & Thesis Global .  Policies regarding theses and dissertation collections largely vary between universities.  So check the library website of the university of interest.

Carnegie Mellon University

Carnegie Mellon theses are now ONLINE and can be searched through the ProQuest database Dissertations & Theses @ Carnegie Mellon University that enables access to citations and abstracts of all dissertations and theses, as well as the fulltext in PDF format.  Scroll down and select Dissertations & Theses, then do a regular search. Print versions are also available in the libraries collection.

The Carnegie Mellon Library catalog , uses the term THESIS to denote both masters' theses and dissertations.  However, the number of master's theses is limited.  Within the libraries, theses are located in designated areas and are shelved in alphabetical order by the author's last name.  The catalog treats theses and dissertations like books and they can be borrowed as such.  Theses may be in print, microfiche, or microform.

• In the catalog use the Advanced Search :  search by author, title, or keyword limiting to type THESIS.
• For a list of theses from a specific department, use Advanced Search to combine a keyword search for the name of the department with location THESES.  E.g., search for "Dept. of Computer Science" with THESES as the location.
• For a reasonably complete list of theses at Carnegie Mellon, use Advanced Search to search Carnegie Mellon University Dissertations in the Subject line.  

Other Countries

Center for Research Libraries:  Foreign Doctoral Dissertations CRL has more than 800,000 cataloged foreign doctoral dissertations from more than 90 countries and over 1200 institutions.

• << Previous: Find Technical Reports
• Next: Find Conferences >>
• Last Updated: Aug 10, 2024 1:15 AM
• URL: https://guides.library.cmu.edu/meng

Home > Colleges and Schools > Engineering & Technology > MAE > ETDs

Mechanical & Aerospace Engineering Theses & Dissertations

Theses and dissertations published by graduate students in the Department of Mechanical and Aerospace Engineering, College of Engineering, Old Dominion University since Fall 2016 are available in this collection. Backfiles of all dissertations (and some theses) have also been added.

In late Fall 2023 or Spring 2024, all theses will be digitized and available here. In the meantime, consult the Library Catalog to find older items in print.

Theses/Dissertations from 2024 2024

Thesis: Effect of Lunar Magnetic Field and Lunar Regolith Simulant on the Growth and Bioactive Compounds Production of Chlorella Vulgaris Microalgae , Jeries Philip Butros Abedrabbo

Dissertation: Application of the Fokker-Planck Equation for Quantifying Initial Condition Uncertainty of Reversible Dynamic Systems , Troy S. Newhart

Thesis: Structural Characterization of a TriTruss Module , Lauren M. Simmons

Theses/Dissertations from 2023 2023

Thesis: Switching Methods for Three-Dimensional Rotational Dynamics Using Modified Rodrigues Parameters , Matthew Jarrett Banks

Dissertation: Studies of Flowfields and Dynamic Stability Characteristics of a Quadrotor , Engin Baris

Thesis: Development, Experimental Validation, and Progressive Failure Modeling of an Ultra-Thin High Stiffness Deployable Composite Boom for in-Space Applications , Jimesh D. Bhagatji

Thesis: Design and Implementation of a Launching Method for Free to Oscillate Dynamic Stability Testing , Kristen M. Carey

Thesis: SeaLion CubeSat Mission Architecture Using Model Based Systems Engineering with a Docs as Code Approach , Kevin Yi-Tzu Chiu

Dissertation: RoboRetrieve --In a Dual Role as a Hand-held Surgical Robot and a Collaborative Robot End-effector to Perform Spillage-free Specimen Retrieval in Laparoscopy , Siqin Dong

Thesis: Fabrication of Solid Oxide Fuel Cell Components Using Stereolithography 3D Printing , Hannah Dyer

Thesis: Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction , Gonzalo Fernandez Mediavilla

Dissertation: Machine Learning Approach to Activity Categorization in Young Adults Using Biomechanical Metrics , Nathan Q. C. Holland

Thesis: Study of Microphonic Effects on the C100 Cryomodule for High Energy Electron Beam Accelerators , Caleb James Hull

Dissertation: E-Cadherin Force Transmission and Stiffness Sensing , Mazen Mezher

Thesis: Experimental and Computational Aerodynamic Studies of Axially-Oriented Low-Fineness-Ratio Cylinders , Forrest Miller

Thesis: The Effect of Through Thickness Reinforcement Angle on the Disbonding Behavior in Skin-Stringer Configuration , Christopher John Morris

Dissertation: Chemical and Physical Interaction Mechanisms and Multifunctional Properties of Plant Based Graphene in Carbon Fiber Epoxy Composites , Daniel W. Mulqueen

Thesis: Data-Driven Predictive Modeling to Enhance Search Efficiency of Glowworm-Inspired Robotic Swarms in Multiple Emission Source Localization Tasks , Payal Nandi

Dissertation: Fabrication of Smooth SAC305 Thin Films via Magnetron Sputtering and Evaluations of Microstructure, Creep, and Electrical Resistivity , Manish Ojha

Dissertation: Faster, Cheaper, and Better CFD: A Case for Machine Learning to Augment Reynolds-Averaged Navier-Stokes , John Peter Romano II

Thesis: A Comparative Study of Vinti-Based Orbit Propagation and Estimation for CubeSats in Very Low Earth Orbits , Ethan Michael Senecal

Theses/Dissertations from 2022 2022

Thesis: A Comparison of Uniaxial Compressive Response and Inelastic Deformation Mechanisms in Freeze Cast Alumina-Epoxy Composites Without and With Rigid Confinement , Tareq Aljuhari

Thesis: Failure Mode, Effects and Criticality Analysis of a Very Low Earth Orbit CubeSat Mission , Robb Christopher Borowicz

Thesis: A Study of Asymmetric Supersonic Wind Tunnel Nozzle Design , Brittany A. Davis

Thesis: Electromagnetic Modeling of a Wind Tunnel Magnetic Suspension and Balance System , Desiree Driver

Dissertation: Advanced Generalized Predictive Control and Its Application to Tiltrotor Aircraft for Stability Augmentation and Vibration Reduction , Thomas Glen Ivanco

Dissertation: Numerical Simulation of Electroosmotic Flow of Viscoelastic Fluid in Microchannel , Jianyu Ji

Thesis: Assembly of Ceramic Particles in Aqueous Suspensions Induced by High-Frequency AC Electric Field , James E. John IV

Dissertation: The Effect of Soft Tissue and Bone Morphology on the Stresses in the Foot and Ankle , Jinhyuk Kim

Thesis: Development of Modeling and Simulation Platform for Path-Planning and Control of Autonomous Underwater Vehicles in Three-Dimensional Spaces , Sai Krishna Abhiram Kondapalli

Thesis: Deep Learning Object-Based Detection of Manufacturing Defects in X-ray Inspection Imaging , Juan C. Parducci

Dissertation: Utilization of Finite Element Analysis Techniques for Adolescent Idiopathic Scoliosis Surgical Planning , Michael A. Polanco

Thesis: Mechanics of Preimpregnated Fiber Tow Deposition and Compaction , Virginia Meredith Rauch

Dissertation: Role of Structural Hierarchy in Multiscale Material Systems , Siavash Sattar

Thesis: Implementation of an Extended Kalman Filter Using Inertial Sensor Data for UAVs During GPS Denied Applications , Sky Seliquini

Dissertation: Collaborative Robotics Strategies for Handling Non-Repetitive Micro-Drilling Tasks Characterized by Low Structural Mechanical Impedance , Xiangyu Wang

Theses/Dissertations from 2021 2021

Dissertation: Tunable Compressive Mechanical Behavior of Ice-Templated Materials , Sashanka Akurati

Thesis: Analysis of a Non-Equilibrium Vortex Pair as Aircraft Trailing Vortices , Manuel Ayala

Thesis: Modeling Interactions in Concentrated Ceramic Suspensions Under AC Electric Field , Naga Bharath Gundrati

Dissertation: Improved Strain Gage Instrumentation Strategies for Rotorcraft Blade Measurements , Timothy S. Davis

Thesis: A Model-Based Systems Engineering Approach to e-VTOL Aircraft and Airspace Infrastructure Design for Urban Air Mobility , Heidi Selina Glaudel

Dissertation: Development and Applications of Adjoint-Based Aerodynamic and Aeroacoustic Multidisciplinary Optimization for Rotorcraft , Ramiz Omur Icke

Thesis: A New Method for Estimating the Physical Characteristics of Martian Dust Devils , Shelly Cahoon Mann

Thesis: Post-Processing and Characterization of Additive Manufactured Carbon Fiber Reinforced Semi-Crystalline Polymers , Patricia Revolinsky

Thesis: Gradient-Based Tradeoff Design for Engineering Applications , Lena Alexis Royster

Thesis: The Effect of Through Thickness Reinforcement on Debonding Behavior of Skin/Stringer Configuration , Yogaraja Sridhar

Thesis: Empirical Modeling of Tilt-Rotor Aerodynamic Performance , Michael C. Stratton

Thesis: A Digital One Degree of Freedom Model of an Electromagnetic Position Sensor , Michelle Elizabeth Weinmann

Theses/Dissertations from 2020 2020

Thesis: Parametric Study of Residual Stresses in Wire and Arc Additive Manufactured Parts , Hisham Khaled Jamil Abusalma

Thesis: The Effect of Compaction Temperature and Pressure on Mechanical Properties of 3D Printed Short Glass Fiber Composites , Pushpashree Jain Ajith Kumar Jain

Thesis: Numerical Analysis of a Roadway Piezoelectric Harvesting System , Abdul Rahman Badawi

Dissertation: Role of Anisometric Particles in Ice-Templated Porous Ceramic Structure and Mechanical Properties , Mahesh Banda

Thesis: Mechanism of Compaction With Wrinkle Formation During Automatic Stitching of Dry Fabrics and the Size Effect of Compression Molded Discontinuous Fiber-Reinforced Composites , Anibal Benjamin Beltran Laredo

Thesis: Conical Orbital Mechanics: A Rework of Classic Orbit Transfer Mechanics , Cian Anthony Branco

Thesis: Rotorcraft Blade Angle Calibration Methods , Brian David Calvert Jr.

Dissertation: Onboard Autonomous Controllability Assessment for Fixed Wing sUAVs , Brian Edward Duvall

Thesis: A Parametric Analysis of a Turbofan Engine with an Auxiliary Bypass Combustion Chamber – The TurboAux Engine , Kaleab Fetahi

Thesis: Space-Based Countermeasure for Hypersonic Glide Vehicle , Robert Joseph Fowler IV

Thesis: Compaction and Residual Stress Modeling in Composite Manufactured with Automated Fiber Placement , Von Clyde Jamora

Thesis: Trajectory Simulation With Battery Modeling for Electric Powered Unmanned Aerial Vehicles , Ege Konuk

Thesis: Detailed Modeling of the Flash Hydrolysis of Algae for Biofuel-Production in COMSOL Multiphysics , Noah Joseph LeGrand

Thesis: Through-Thickness Reinforcement and Repair of Carbon Fiber Based Honeycomb Structures Under Flexure and Tension of Adhesively Bonded Joints , Aleric Alden Sanders

Thesis: Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters in Resonance and Off-Resonance Modes , Mohamed A. Shabara

Thesis: Thermal Contact Resistance Measurement and Related Uncertainties , Amanda Elizabeth Stark

Thesis: Model Based Systems Engineering for a Venture Class Launch Facility , Walter McGee Taraila

Thesis: A Post-Impact Behavior of Platelet-Based Composites Produced by Compression Molding , Christopher Eugene Ervin Volle

Thesis: Nonlinearity Index Aircraft Spin Motion Analysis With Dynamic Inversion Spin Recovery Controller Design , Jeffry Walker

Thesis: A Study of the Aeroacoustics of Swept Propellers for Small Unmanned Aerial Vehicles , Arthur David Wiedemann

Thesis: Finite Element Analysis Investigation of Hybrid Thin-Ply Composites for Improved Performance of Aerospace Structures , Alana M. Zahn

Theses/Dissertations from 2019 2019

Thesis: Characterization and Optimization of a Propeller Test Stand , Colin Bruce Leighton Benjamin

Dissertation: Endogenous Force Transmission Between Epithelial Cells and a Role for α-Catenin , Sandeep Dumbali

Dissertation: Effect of the Physical Micro-Environment on Cell Adhesion and Force Exertion , Mohamad Eftekharjoo

Thesis: Reducing the Noise Impact of Unmanned Aerial Vehicles by Flight Control System Augmentation , Matthew B. Galles

Thesis: Design and Manufacture of an Inertial Cascade Impactor for Industrial Hygiene Purposes , Hector Joel Gortaire

Thesis: Off Axis Compressive Response of Ice-Templated Ceramics , Rahul Kumar Jujjavarapu

Thesis: Unsupervised-Learning Assisted Artificial Neural Network for Optimization , Varun Kote

Dissertation: Numerical Simulation of Viscoelastic Flow in Micro/Nanochannels , Lanju Mei

Thesis: Comparison of Support Methods for Static Aerodynamic Testing and Validation of a Magnetic Suspension and Balance System , Cameron K. Neill

Thesis: Extension of a Penalty Method for Numerically Solving Constrained Multibody Dynamic Problems , Troy Newhart

Dissertation: Computational Analysis and Design Optimization of Convective PCR Devices , Jung Il Shu

Thesis: Periodic Orbit Analytic Construction In The Circular Restricted Three-Body Problem , Jay Shriram Suryawanshi

Thesis: A CFD Study of Steady Fully Developed Laminar Flow Through a 90-Degree Bend Pipe with a Square Cross-Sectional Area , Subodh Sushant Toraskar

Dissertation: Estimation of Arterial Wall Parameters Via Model-Based Analysis of Noninvasively Measured Arterial Pulse Signals , Dan Wang

Theses/Dissertations from 2018 2018

Thesis: Offshore Wind Energy: Simulating Local Offshore Wind Turbine , Ian P. Aquino

Dissertation: Epithelial Sheet Response to External Stimuli , Yashar Bashirzadeh

Thesis: Anthropomorphically Inspired Design of a Tendon-Driven Robotic Prosthesis for Hand Impairments , Manali Bapurao Bhadugale

Thesis: Aerothermodynamic Analysis of a Mars Sample Return Earth-Entry Vehicle , Daniel A. Boyd

Thesis: Volterra Series Approximation for Multi-Degree of Freedom, Multi-Input, Multi-Output, Aircraft Dynamics , Alexander J. Chen

Dissertation: Simplified, Alternative Formulation of Numerical Simulation of Proton Exchange Membrane Fuel Cell , Russell L. Edwards

Thesis: Distributed Sensing and System Identification of Cantilever Beams and Plates in the Presence of Weak Nonlinearities , Patrick Sean Heaney

Thesis: Dynamic Response Modeling of High Speed Planing Craft with Enforced Acceleration , Brian K. Johnson

Dissertation: Identification and Optimal Linear Tracking Control of ODU Autonomous Surface Vehicle , Nadeem Khan

Dissertation: Design and Implementation of an Artificial Neural Network Controller for Quadrotor Flight in Confined Environment , Ahmed Mekky

Thesis: Gust Alleviation System for General Aviation Aircraft , Lucas Coleman Mills

Thesis: Human-Robot Collaborative Force-Controlled Micro-Drilling for Advanced Manufacturing and Medical Applications , Parimal Mahesh Prajapati

Thesis: Single-Stage, Venturi-Driven Desalination System , Brandon Proetto

Thesis: A Cost Effective Design for a Propeller Thrust/Torque Balance , Nicholas Barrett Sadowski

Dissertation: Understanding the Mechanical Behavior of Costal Cartilage at Their Curved Exterior Surface Via a Tactile Sensor with a Built-In Probe for Distributed-Deflection Detection , Jiayue Shen

Thesis: A Scientific Approach to Understanding the Head Trauma Endured by a Mixed Martial Arts Fighter , John William Michael Sorbello

Thesis: Robocatch: Design and Making of a Hand-Held Spillage-Free Specimen Retrieval Robot for Laparoscopic Surgery , Farid Tavakkolmoghaddam

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines
• Author Guidelines
• MAE Website
• Other Digital Collections
• ODU Libraries
• Old Dominion University

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

BYU ScholarsArchive

Home > Engineering > Mechanical Engineering > Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2024 2024.

Infared Light-Based Data Association and Pose Estimation for Aircraft Landing in Urban Environments , David Akagi

Application of High-Deflection Strain Gauges to Characterize Spinal-Motion Phenotypes Among Patients with CLBP , Spencer Alan Baker

The Design, Prototyping, and Validation of a New Wearable Sensor System for Monitoring Lumbar Spinal Motion in Daily Activities , Brianna Bischoff

GPS-Denied Localization of Landing eVTOL Aircraft , Aaron C. Brown

Development of Deployable Arrays for Satellites through Origami-Pattern Design, Modeling, and Optimization , Nathan McKellar Coleman

Investigating Which Muscles are Most Responsible for Tremor Through Both Experimental Data and Simulation , Daniel Benjamin Free

Feasibility of Parallelized Measurement of Local Thermal Properties , Alexander J. Hansen

Effects of Print Process Parameters on Droplet-Powder Interaction in Binder Jet Additive Manufacturing , Jacob Lawrence

Control, Localization, and Shock Optimization of Icosahedral Tensegrity Systems , Brett Layer

Multiscale Characterization of Dislocation Development During Cyclic Bending Under Tension in Commercially Pure Titanium , Nathan R. Miller

Membrane Hinges for Deployable Systems , C. Mitchel Skinner

Time-Dependent Strain-Resistance Relationships in Silicone Nanocomposite Sensors , Alex Mikal Wonnacott

Theses/Dissertations from 2023 2023

A Series of Improved and Novel Methods in Computer Vision Estimation , James J. Adams

Experimental Validation of a Vibration-Based Sound Power Method , Trent P. Bates

Detecting Lumbar Muscle Fatigue Using Nanocomposite Strain Gauges , Darci Ann Billmire

Heated Supersonic Jet Characteristics From Far-field Acoustical Measurements , Matthew Austin Christian

Cooperative Navigation of Autonomous Vehicles in Challenging Environments , Brendon Peter Forsgren

Heat Transfer to Rolling or Sliding Drops on Inclined Heated Superhydrophobic Surfaces , Joseph Merkley Furner

Lumbar Skin Strain Fields in the Context of Skin Adhered Wearables , Andrew Kent Gibbons

A Statistical Approach for Analyzing Expectations Alignment Between Design Teams and their Project Stakeholders , Matthew Christian Goodson

Interaction of Natural Convection and Real Gas Radiation Over a Vertical Flat Plate , Nathan Hale

Thermal Atomization of Impinging Drops on Superheated Superhydrophobic Surfaces , Eric Lee

An Inexpensive, 3D Printable, Arduino and BluRay-based, Confocal Laser and Fluorescent Scanning Thermal Microscope , Justin Loose

Predictive Modeling the Impact of Engineered Products in Dynamic Sociotechnical Systems: An Agent-Based Approach , Christopher S. Mabey

Gradient-Based Optimization of Highly Flexible Aeroelastic Structures , Taylor G. McDonnell

Dynamic Segmental Kinematics of the Lumbar Spine During Diagnostic Movements , Paul McMullin

Friction and Heat Transfer Modeling of the Tool and Workpiece Interface in Friction Stir Welding of AA 6061-T6 for Improved Simulation Accuracy , Ryan Melander

Designed for Better Control: Using Kinematic and Dynamic Metrics to Optimize Robot Manipulator Design , John R. Morrell

Numerical Evaluation of Forces Affecting Particle Motion in Time-Invariant Pressurized Jet Flow , Donald E. Peterson

Modeling the Influence of Vibration on Flow Through Embedded Microchannels , Joseph S. Seamons

Evaluating Effects of Urban Growth Within the Greater Salt Lake Area on Local Meteorological Conditions Using Urban Canopy Modeling , Corey L. Smithson

Soft Robot Configuration Estimation: Towards Load-Agnostic Soft-Bodied Proprioception , Christian Peter Sorensen

Integration of Insoluble and Soluble Dopants into Steel Using Laser Powder Bed Fusion , McKay Goodman Sperry

Perfusion Pressure-Flow Relationships in Synthetic Poroelastic Vocal Fold Models , Cooper B. Thacker

Methods for Designing Compact and Deployable Origami-Inspired Flat-Foldable Spacecraft Antennas and Other Systems , Collin Ryan Ynchausti

Theses/Dissertations from 2022 2022

Mechanisms for Improvement of Key Mechanical Properties in Polymer Powder Bed Fusion Processes , Clinton Spencer Abbott

Reformulated Vortex Particle Method and Meshless Large Eddy Simulation of Multirotor Aircraft , Eduardo J. Alvarez

Improving Ideation of User Actions Using a Novel Ideation Method , Thomas L. Ashworth

Temperature and Radiation Measurements in a Pressurized Oxy-Coal Reactor , Dustin Peter Badger

Midfoot Motion and Stiffness: Does Structure Predict Function? , Kirk Evans Bassett

The Effects of Various Inlet Distortion Profiles on Transonic Fan Performance , Andrew Michael Bedke

Optical Observation of Large Area Projection Sintering , Derek Black

Investigations into Pressure Profile and Pressure Control in Wrist-Worn Health Monitoring Devices , Roger McAllister Black

Selecting and Optimizing Origami-Based Patterns for Deployable Space Systems , Diana Stefania Bolanos

Developing an Accurate Simulation Model for Predicting Friction Stir Welding Processes in 2219 Aluminum Alloy , Kennen Brooks

An Augmented Reality Maintenance Assistant with Real-Time Quality Inspection on Handheld Mobile Devices , James Thomas Frandsen

Motion Analysis of Physical Human-Human Collaboration with Varying Modus , Seth Michael Freeman

Effects of Optical Configuration and Sampling Efficiency on the Response of Low-Cost Optical Particle Counters , Brady Scott Hales

Developing Ultra-High Resolution 3D Printing for Microfluidics , Kent Richard Hooper

Controlled Pre-Wetting of Spread Powder and Its Effects on Part Formation and Printing Parameters in Binder Jetting Additive Manufacturing , Colton G. Inkley

Enabling Successful Human-Robot Interaction Through Human-Human Co-Manipulation Analysis, Soft Robot Modeling, and Reliable Model Evolutionary Gain-Based Predictive Control (MEGa-PC) , Spencer W. Jensen

Demonstration of a Transient Hot Wire Measurement System Towards a Carbide-Based Sensor for Measuring the Thermal Conductivity of Molten Salts , Peter Charles Kasper

Measured Spectral, Directional Radiative Behavior of Corrugated Surfaces , Kyle S. Meaker

Modified Transient Hot-Wire Needle Probe for Experimentally Measuring Thermal Conductivity of Molten Salts , Brian N. Merritt

Parametric Models of Maize Stalk Morphology , Michael Alan Ottesen

A Formal Consideration of User Tactics During Product Evaluation in Early-Stage Product Development , Trenton Brady Owens

Airship Systems Design, Modeling, and Simulation for Social Impact , Daniel C. Richards

Sub-Grain Characterization of Slip Activity in BCC Tantalum , Tristan Kirby Russell

Tidally Generated Internal Waves from Dual-Ridge Topography , Ian Derik Sanderson

An Investigation into the Role of Geometrically Necessary Dislocations in Multi-Strain Path Deformation in Automotive Sheet Alloys , Rishabh Sharma

Methods for Engineers to Understand, Predict, and Influence the Social Impacts of Engineered Products , Phillip Douglas Stevenson

Principles for Using Remote Data Collection Devices and Deep Learning in Evaluating Social Impact Indicators of Engineered Products for Global Development , Bryan J. Stringham

Improvement of Ex Vivo Testing Methods for Spine Biomechanical Characterization , Aubrie Lisa Taylor

Gradient-Based Wind Farm Layout Optimization , Jared Joseph Thomas

Material Development Toward an Index-Matched Gadolinium-Based Heterogenous Capture-Gated Neutron Detector , Aaron J. Thorum

Optimization of a Smart Sensor Wearable Knee Sleeve for Measuring Skin Strain to Determine Joint Biomechanics , David Steven Wood

Multi-Material 3D-Printed Silicone Vocal Fold Models , Clayton Adam Young

Theses/Dissertations from 2021 2021

Laser Forming of Compliant Mechanisms and Flat-Foldable Furniture , Daniel Calvin Ames

Effects of Static and Dynamic Thermal Gradients in Gas Chromatography , Samuel Avila

Five Degree-of-Freedom Property Interpolation of Arbitrary Grain Boundaries via Voronoi Fundamental Zone Octonion Framework , Sterling Gregory Baird

Optimization of Solar-Coal Hybridization for Low Solar Augmentation , Aaron T. Bame

Characterizing Behaviors and Functions of Joints for Design of Origami-Based Mechanical Systems , Nathan Chandler Brown

Thermal Transport to Impinging Droplets on Superhydrophobic Surfaces , Jonathan C. Burnett

3D Permeability Characterization of Sheared Fiber Reinforcement for Liquid Composite Molding Process Simulation , Collin William Childs

The Impact of Inkjet Parameters and Environmental Conditions in Binder Jetting Additive Manufacturing , Trenton Miles Colton

Control of Post-Weld Fracture Toughness in Friction Stir Processed X-80 HSLA Steel , Nolan Tracy Crook

Sensitivity of Tremor Propagation to Model Parameters , Charles Paul Curtis Jr.

Feasibility and Impact of Liquid/Liquid-encased Dopants as Method of Composition Control in Laser Powder Bed Fusion , Taylor Matthew Davis

Design Validation of a Multi-Stage Gradually Deploying Stent , Dillon J. Despain

Analysis of Closed-Loop Digital Twin , Andrew Stuart Eyring

Completion and Initial Testing of a Pressurized Oxy-Coal Reactor , Scott Hunsaker Gardner

Method for Creating Subject-specific Models of the Wrist in both Degrees of Freedom Using Measured Muscle Excitations and Joint Torques , Blake Robert Harper

CEDAR: A Dimensionally Adaptive Flow Solver for Cylindrical Combustors , Ty R. Hosler

Modeling Current and Future Windblown Utah Dust Events Using CMAQ 5.3.1 , Zachary David Lawless

Acclimation of Contact Impedance and Wrist-Based Pulsatile Signal Measurements Through Electrical Bioimpedance , Diego A. Leon

Characterizing Bacterial Resistance and Microstructure-Related Properties of Carbon-Infiltrated Carbon Nanotube Surface Coatings with Applications in Medical Devices , Stephanie Renee Morco

Effects of Whole Body Vibration on Inhibitory Control Processes , Bennett Alan Mortensen

Exploration of Constant-Force Wristbands for a Wearable Health Device , Thomas Alexander Naylor

Effect of Ported Shroud Casing Treatment Modifications on Operational Range and Limits in a Centrifugal Compressor , Alexander A. Newell

Considering Social Impact when Engineering for Global Development , Hans Jorgen Ottosson

A New Method of Measuring Flow Stress for Improved Modeling of Friction Stir Welding , David John Prymak

Constrained Nonlinear Heuristic-Based MPC for Control of Robotic Systems with Uncertainty , Tyler James Quackenbush

A Study in Soft Robotics: Metrics, Models, Control, and Estimation , Levi Thomas Rupert

Development of an Origami Inspired Composite Deployable Structure Utilizing Compliant Joints as Surrogate Folds , Samuel Porter Smith

Development and Evaluation of an Improved Microbial Inactivation Model for Analyzing Continuous Flow UV-LED Air Treatment Systems , Cole Holtom Thatcher

Micromechanisms of Near-Yield Deformation in BCC Tantalum , Joshua Jr-Syan Tsai

Effects of Carbon-Infiltrated Carbon Nanotube Growth on the Biocompatibility of 316L Stainless Steel , Sterling Charles Voss

Active Thermography for Additive Manufacturing Processes , Nicholas Jay Wallace

System Identification of Postural Tremor in Wrist Flexion-Extension and Radial-Ulnar Deviation , Sydney Bryanna Ward

Effective Temperature Control for Industrial Friction Stir Technologies , Arnold David Wright

Page 1 of 9

Advanced Search

• Notify me via email or RSS

ScholarsArchive ISSN: 2572-4479

• Collections
• Disciplines
• Scholarly Communication
• Additional Collections
• Academic Research Blog

Author Corner

Hosted by the.

• Harold B. Lee Library

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

DigitalCommons@University of Nebraska - Lincoln

Home > Civil Engineering > Dissertations, Theses, and Student Research

Civil and Environmental Engineering

Department of civil and environmental engineering: dissertations, theses, and student research.

Breakaway Luminaire Pole Research , Jacob Conway

Detection of Deficiencies and Data Analysis of Bridge Members with Deep Convolutional Neural Networks , Bennett Jackson

Cost Modeling of Provision C.3 Green Stormwater Infrastructure Requirements for Residential Development in Concord, California , James Henry Mizutani

Evaluation of Unreinforced and Geosynthetic-Reinforced Subgrade Material Performance with Large-Scale Tracking Wheel Tests and Dynamic Cone Penetrometer Tests , Kenaz Owusu

Sustainable Revitalization of Asphalt Pavements: An In-Depth Analysis of Enhancing the Performance of Asphalt Binder Through the Application of Rheological and Molecular Dynamics Simulation Techniques , Muhammad Ahmad

Performing Motorized-to-Non-Motorized Crash Analysis Using Multi-Model LBS Traffic Data Calibrated Through Random Forest Models , Nicholas Aldridge

Structural Performance and Resiliency of Reinforced Concrete Bridge Pier Columns, Multi-Column Piers, and Bridge Systems Subjected to Multiple Hazards – Fire, Collision, and Air Blast , Qusai Abdulkarim Alomari

Assessing the Performance of High-RAP Mixtures Incorporating Crude Vegetable Oils and an Antioxidant from Mechanical, Environmental, and Economic Perspectives , Nitish R. Bastola

Safety and Operational Assessment of Rural Free Right-Turn Ramp Intersections , Jonathon Camenzind

Assessment of Bridge Pier Response to Fire, Vehicle Impact, and Air Blast , Chen Fang, Qusai Alomari, and Daniel G. Linzell

The Effects of Inaccurate and Missing Highway-Rail Grade Crossing Inventory Data on Crash and Severity Model Estimation and Prediction , Muhammad Umer Farooq

Reducing Infiltration and Inflow in Small Collection Systems: Environmental, Economic, and Other Impacts , Andrew Hansen

CO 2 Storage Capacity and Injectivity of Stacked Carbonates of the Pennsylvanian and Permian in Western Nebraska , Lateef Lawal

Bridge Deck Overhang Design: Effective Vehicle Impact Loads, Ultimate Strength, and Implications on Bridge Rail Performance , Andrew Eric Loken

Adaptation of Concrete and Timber Bridge Railings for Low-Volume Traffic , Russell Masterson

Transportation Components of the City of Bennet Comprehensive Plan and Downtown Economic Development Plan , Kyle McLaughlin

Integration of Environmental Sustainability and Decision Making: Case Studies of Civil Infrastructure , Sussan Moussavi

Investigation and Modification of Single-Post Aluminum Sign Supports for Mash Crashworthiness , Rodrigo Quintero

Environmental Sustainability of Small Wastewater Treatment Systems and Pathways for Improvement , Matthew James Thompson

Three-Dimensional Structural Analysis of Temple 16 and Rosalila at Copan Ruinas , Luis Tuarez

Energy Dissipation Optimization for Circular Culverts , Chi Zhang

Evaluation of an Equivalent Mean Grain Size Diameter to Rationally Predict the Erodibility of Fine Riverbed Soils in Nebraska , Basil Abualshar

Interlayered Thin Film Composite (iTFC) Membranes: The Synthesis and Assembly of Active Layer from Conjugated Microporous Polymer , Febby Andini

Behavior of Completely Automated Evapotranspiration Estimation (eeMETRIC) , Atiqullah Atif

Data-Driven Prioritization and Empirical Predictions for Bridge Scour in Nebraska , Awgku Ahmad Hashim Awg Bolhasan

A Physical Model of Deadmans Run , Quinn Brandt

Evaluation of Swelling Pressure and Shear Strength of Inorganic Microfiber-Reinforced Bentonite for the Engineered Barrier System , Jose Maria Ferdinand Victoria Calaunan

Performance of Concrete with Different Cement Finenesses and Nano-activators , Brandon Faltin

Estimation of Methane Emissions from Beef Cattle Manure in Nebraska , Noe Hernandez

Risk Assessment of Hazardous Material Transportation for Small and Tribal Communities , Harrison Redepenning

Experimental and Numerical Analysis of Soil-Geosynthetic Composite for a Geosynthetic-Reinforced Roadway System , Daniel Robertson

Empirical Fragility Functions and Numerical Parametric Study for Buckling of Steel Grain Bins under High Wind Loads , Andrew Ruder

Development of a Next-Generation Non-Proprietary Portable Concrete Barrier , Riley Ruskamp

Experimental and Numerical Study: Sheet Pile Abutment Systems for Water–Crossing Bridges , Hung Phi Van

Efficiency of Bank Filtration in the Removal of Cyanotoxins Under Different Levels of Nutrients , Luke Walkenhorst

Measuring Acoustic Nonlinearity of Elastic Materials Using Thermal Modulation of Ultrasonic Waves , Bibo Zhong

Application of Biochar as Beneficial Additive in Concrete , Temirlan Barissov

Detecting and Evaluating Cracks on Aging Concrete Members with Deep Convolutional Neural Networks , Brendan Barnes

IMPACT OF PARTICLE SURFACE CHARGE HETEROGENEITY ON DEPOSITION ONTO FLAT SURFACES AND TRANSPORT IN POROUS MEDIA , Thompson Delon

Prioritization of Research on Bridge Railings for Use on Timber Deck Bridges and Development of Two Glulam Bridge Railing Systems , Jared Duren

Evaluation of Permanent Concrete Barriers to MASH 2016 , Samuel Elias Hovde

A METHODOLOGY FOR ESTIMATING CAPACITY AND PASSENGER CAR EQUIVALENTS FOR CONNECTED AND AUTOMATED VEHICLES TRAVELING ON FREEWAYS , Antonio Hurtado Beltran

Risk and Safety Associated with Hazardous Materials Transport in Rural and Native American Communities: A Case Study of Thurston County, Nebraska , Sydney James

Establishing Safe Operating Speeds for Autonomous Vehicles: A Case Study from the Automated Skyway Express in Jacksonville, Florida , Andrew Loken

Fragility Functions of Manufactured Houses under Earthquake Loads , Shuyah Tani Aurore Ouoba

Modeling Watershed Sensitivity to Climate Change in Systems Affected by Discharge of Mine Tailings , Johnette C. Shockley

PROBABILISTIC SEISMIC VULNERABILITY ASSESSMENT OF FREESTANDING HISTORIC MONUMENTS , Marie E. Wagner

Determinants of Water System Management , Caleb White

Hydraulic and Mineralogical Characterization of Organoclay Before and After Reaction with Non-Aqueous Phase Liquid (NAPL) , Mostafa Afzalian

Biofiltration of Volatile Organic Compounds Emitted at Ethanol Plants , Mitham Al-faliti

Optimum Mixing Design of Xanthan and Gellan Treated Soils for Slope Stabilization for Weathered Shales and Glacial Tills in Nebraska , Layal Bitar

Concentration and Treatment of Odors Generated by Landfills , Gabriel Cohen

Development of a MASH Test Level 4 Open Concrete Bridge Rail , Jacob DeLone

Reliability-Calibrated ANN-Based Load and Resistance Factor Load Rating for Steel Girder Bridges , Francisco Garcia

Eliminating Rebar Splicing in Transverse Joints of Precast Full Depth Bridge Deck Panels , David Gee

Quantitative Assessment of Alkali-Silica Reaction in Small and Large-Scale Concrete Specimens Utilizing Nonlinear Acoustic Techniques , Clayton Malone

NITRATE AND HERBICIDES REMOVAL FROM GROUNDWATER USING IMMOBILIZED ALGAE , Sara Mollamohammada

RIVETED STEEL RAILWAY BRIDGE HEALTH MONITORING AND DAMAGE DETECTION , Ahmed Rageh

Development of an Improved Arterial Roadway Performance Reliability Methodology , Ernest Tufuor

Evaluation Of Internally Cured Bridge Deck Concrete With Standard And Optimized Aggregate Gradation , Arman Abdigaliyev

RESTRICTED CROSSING U-TURNS AT RURAL INTERSECTIONS , Timothy Adams

Numerical Simulation of Diffuse Ultrasonic Waves in Concrete , Hossein Ariannejad

Full Scale 13-Story Building Implosion and Collapse: Effects on Adjacent Structures , Kanchan Devkota

Biofiltration of Volatile Organic Compounds Emitted at Ethanol Plants , Christopher Arthur Duerschner

Simulation of Antimicrobial Resistance Gene Fate in Narrow Grass Hedges , Marzieh Khedmati

Probabilistic Analysis of Slide-Rocking Structures Under Earthquake Loads , Taylor J. Knickerbocker

Sustainability Assessment of U.S. Beef Processing and its Antimicrobial Systems , Shaobin Li

Development of a Mix Design Adjustment Method For Fiber Reinforced Concrete and Super High Performance Concrete Based on Excess Paste , Joe Malloy

Using Theoretical And Experimental Particle Packing For Aggregate Gradation Optimization To Reduce Cement Content In Pavement Concrete Mixtures , Miras Mamirov

Development of Post-to-Deck Connections for Use in a MASH TL-4 Steel-Tube Bridge Rail , Pascual Mauricio

Environmental Sustainability Assessment of Small Nebraska Mechanical Water Resource Recovery Facilities: Impacts of Construction and Operations , Sussan Moussavi

Assessing Impact and Blast Resilience of Polymer Coated Cementitious Materials , Murtaza Nalwala, Gabriel Nsengiyumva, and Yong-Rak Kim

Development of a MASH TL-4 Steel, Side-Mounted, Beam-and-Post, Bridge Rail , Oscar Pena

Application of Remote Sensing Technology in Water Resources Management , Mahesh Pun

Proportion and Evaluation of Ultra-High Performance Concrete Using Local Materials , Flavia Ribeiro Furtado de Mendonca

Effects of Nutrient Level and Growth Rate on Mutation and Conjugation Processes That Confer Antibiotic Resistance to E. coli , Mohammadreza Shafieifini

LIDAR Assessment to Monitor Bridge Response Under Live and Dead Loads , Daniel Watson

MULTISCALE MODELING OF FRACTURE IN QUASI-BRITTLE MATERIALS USING BIFURCATION ANALYSIS AND ELEMENT ELIMINATION METHOD , Keyvan Zare Rami

FINITE ELEMENT MODELING AND UPDATING OF A FIVE-TIERED PAGODA STYLE TEMPLE , Linh Maytham Abdulrahman

Shear Strength Characteristics and Failure Mechanism of Slopes in Overconsolidated Soils of Nebraska , Hossein Bahmyari

Experimental Study on a New Type of Transverse Connection for Nebraska County Bridge System , Alexander Bleyhl

Examination of Steel Pin and Hanger Assembly Performance – Retrofit to Replacement , Chandana Chickamagalur Balakrishna

Effect of Swine Manure Pit Additives and Facility Disinfectants on the Fate of Antibiotics and Manure Composition During Simulated Swine Manure Slurry Storage , Jon Duerschner

Integration of Remote Sensing and Proximal Sensing for Improvement of Field Scale Water Management , Foad Foolad

Statistical Investigation of Road and Railway Hazardous Materials Transportation Safety , Amirfarrokh Iranitalab

Artificial Neural Network and Finite Element Modeling of Nanoindentation Tests on Silica , KIANOOSH KOOCHEKI

Structural Identification and Assessment of the Inverted Tee Girder Bridge System , Garrett P. Martindale

Road Diet Feasibility Analysis for Nebraska , Brandon L. Purintun

Optimized Health Monitoring Plans for a Steel, Double-Track Railway Bridge , Ahmed Rageh

Evaluation and Development of CPT Based Pile Design in Nebraska Soils , Alex Silvey

Rainwater Harvesting System Scenario Analysis on Runoff Reduction Potential in Surabaya, Indonesia: A Geospatial Analysis for Brantas Hilir Watershed , Putri Sukmahartati

Investigation of a Tractor-Tank Trailer Roadside Containment Barrier , Dean L. Whitfield

Effects of Moving Bottlenecks on Traffic Operations on Four-lane Level Freeway Segments , Jianan Zhou

Bias and Other Error in Gridded Weather Data Sets and Their Impacts on Estimating Reference Evapotranspiration , Philip A. Blankenau

Broadening Understanding of Roundabout Operation Analysis: Planning-Level Tools and Signal Application , Ahmed Buasali

Molecular Dynamics Modeling and Simulation of Bitumen Chemical Aging , Farshad Fallah

Impact-resistant Behavior of Reinforced Concrete Bridge Columns , Chen Fang

Simulation and Prediction of the Groundwater Level in the Surrounding Area of the Nebraska Management System Evaluation Area site in Central Nebraska. , Cesar Augusto Gomez Peña

Chemical-Rheological Evaluation of the Short-Term and Long-Term Effectiveness of Binder Rejuvenators , H.F. Haghshenas, S. Kommidi, D. Nguyen, and Y-R Kim

Evaluation of Thin Asphalt Overlay Pavement Preservation in Nebraska: Laboratory Tests, MEPDG, and LCCA (17-2624) , Soohyok Im, Taesun You, Yong-Rak Kim, Gabriel Nsengiyumva, Robert Rea, and Hamzeh Haghshenas

Advanced Search

Search Help

• Notify me via email or RSS
• Administrator Resources
• How to Cite Items From This Repository
• Copyright Information
• Collections
• Disciplines

Author Corner

• Guide to Submitting
• Submit your paper or article
• Civil Engineering Website

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

• Northeastern University
• College of Engineering
• Department of Mechanical and Industrial Engineering
• Mechanical and Industrial Engineering Theses and Dissertations
• Mechanical and Industrial Engineering Master's Theses
• Industrial Engineering Master's Theses

Industrial Engineering Master's Theses Collection

http://hdl.handle.net/2047/D20233328

AgentSpeak: a framework for agent-based modeling with integrated large language models; Case study: analyzing policy interventions in electric vehicle adoption.

An analytics driven decision support system to investigate the risk of non-index hospital readmission

COMPASS: continuous objective multimodal pain assessment sensing system design.

Cost benefit analysis of personalized healthcare delivery for breast cancer patients

A data mining approach to atmospheric compensation for avisris hyperspectral imagery

A deep reinforcement learning approach for an adaptive job shop scheduling

Detecting cause of readmission: a big data analytics approach.

Dynamic programming for replacement threshold and inspection scheme optimization in condition-based maintenance

Economic comparison of selective laser melting and conventional subtractive manufacturing processes

Effect of font and background color combination on the recognition efficiency for LCD displays