vertex presentation is normal

Fetal Presentation, Position, and Lie (Including Breech Presentation)

  • Key Points |

Abnormal fetal lie or presentation may occur due to fetal size, fetal anomalies, uterine structural abnormalities, multiple gestation, or other factors. Diagnosis is by examination or ultrasonography. Management is with physical maneuvers to reposition the fetus, operative vaginal delivery , or cesarean delivery .

Terms that describe the fetus in relation to the uterus, cervix, and maternal pelvis are

Fetal presentation: Fetal part that overlies the maternal pelvic inlet; vertex (cephalic), face, brow, breech, shoulder, funic (umbilical cord), or compound (more than one part, eg, shoulder and hand)

Fetal position: Relation of the presenting part to an anatomic axis; for transverse presentation, occiput anterior, occiput posterior, occiput transverse

Fetal lie: Relation of the fetus to the long axis of the uterus; longitudinal, oblique, or transverse

Normal fetal lie is longitudinal, normal presentation is vertex, and occiput anterior is the most common position.

Abnormal fetal lie, presentation, or position may occur with

Fetopelvic disproportion (fetus too large for the pelvic inlet)

Fetal congenital anomalies

Uterine structural abnormalities (eg, fibroids, synechiae)

Multiple gestation

Several common types of abnormal lie or presentation are discussed here.

vertex presentation is normal

Transverse lie

Fetal position is transverse, with the fetal long axis oblique or perpendicular rather than parallel to the maternal long axis. Transverse lie is often accompanied by shoulder presentation, which requires cesarean delivery.

Breech presentation

There are several types of breech presentation.

Frank breech: The fetal hips are flexed, and the knees extended (pike position).

Complete breech: The fetus seems to be sitting with hips and knees flexed.

Single or double footling presentation: One or both legs are completely extended and present before the buttocks.

Types of breech presentations

Breech presentation makes delivery difficult ,primarily because the presenting part is a poor dilating wedge. Having a poor dilating wedge can lead to incomplete cervical dilation, because the presenting part is narrower than the head that follows. The head, which is the part with the largest diameter, can then be trapped during delivery.

Additionally, the trapped fetal head can compress the umbilical cord if the fetal umbilicus is visible at the introitus, particularly in primiparas whose pelvic tissues have not been dilated by previous deliveries. Umbilical cord compression may cause fetal hypoxemia.

vertex presentation is normal

Predisposing factors for breech presentation include

Preterm labor

Uterine abnormalities

Fetal anomalies

If delivery is vaginal, breech presentation may increase risk of

Umbilical cord prolapse

Birth trauma

Perinatal death

vertex presentation is normal

Face or brow presentation

In face presentation, the head is hyperextended, and position is designated by the position of the chin (mentum). When the chin is posterior, the head is less likely to rotate and less likely to deliver vaginally, necessitating cesarean delivery.

Brow presentation usually converts spontaneously to vertex or face presentation.

Occiput posterior position

The most common abnormal position is occiput posterior.

The fetal neck is usually somewhat deflexed; thus, a larger diameter of the head must pass through the pelvis.

Progress may arrest in the second phase of labor. Operative vaginal delivery or cesarean delivery is often required.

Position and Presentation of the Fetus

If a fetus is in the occiput posterior position, operative vaginal delivery or cesarean delivery is often required.

In breech presentation, the presenting part is a poor dilating wedge, which can cause the head to be trapped during delivery, often compressing the umbilical cord.

For breech presentation, usually do cesarean delivery at 39 weeks or during labor, but external cephalic version is sometimes successful before labor, usually at 37 or 38 weeks.

quizzes_lightbulb_red

  • Cookie Preferences

This icon serves as a link to download the eSSENTIAL Accessibility assistive technology app for individuals with physical disabilities. It is featured as part of our commitment to diversity and inclusion. M

Copyright © 2024 Merck & Co., Inc., Rahway, NJ, USA and its affiliates. All rights reserved.

vertex presentation is normal

  • Third Trimester
  • Labor & Delivery

What Is Vertex Presentation?

profile picture of The Bump Editors

Vertex presentation is just medical speak for “baby’s head-down in the birth canal and rearing to go!” About 97 percent of all deliveries are headfirst, or vertex—and rare is the OB who will try to deliver any other way.

Other, less common presentations include breech (when baby’s head is near your ribs) and transverse (which means the shoulder, arm or trunk is due to come out first because baby is lying on his side). Most babies will turn by about 34 weeks, but some have “unstable lies,” meaning they’re like a politician trying to make everyone happy—that is, they frequently flip positions.

About 95 percent of all babies will be head-down and ready to go by delivery day. If your little one isn’t vertex by 36 weeks, ask your doctor about your options. She may recommend doing a version procedure , in which the doctor tries to manually turn baby by pushing on your abdomen, but it does carry some risks and is only about 60 to 70 percent successful.

Expert: Melissa M. Goist, MD, assistant professor, obstetrics and gynecology, The Ohio State University Medical Center.

Please note: The Bump and the materials and information it contains are not intended to, and do not constitute, medical or other health advice or diagnosis and should not be used as such. You should always consult with a qualified physician or health professional about your specific circumstances.

Plus, more from The Bump:

Delivering a breech baby?

Shift breech baby before birth?

Will my baby be breech?

Navigate forward to interact with the calendar and select a date. Press the question mark key to get the keyboard shortcuts for changing dates.

Next on Your Reading List

Jason Kelce poses for a photo with Kylie Kelce during the Kelce documentary premiere at Suzanne Roberts Theater on September 8, 2023 in Philadelphia, Pennsylvania

U.S. flag

An official website of the United States government

The .gov means it's official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you're on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

  • Publications
  • Account settings
  • Browse Titles

NCBI Bookshelf. A service of the National Library of Medicine, National Institutes of Health.

StatPearls [Internet]. Treasure Island (FL): StatPearls Publishing; 2024 Jan-.

Cover of StatPearls

StatPearls [Internet].

Delivery, face and brow presentation.

Julija Makajeva ; Mohsina Ashraf .

Affiliations

Last Update: January 9, 2023 .

  • Continuing Education Activity

Face and brow presentation is a malpresentation during labor when the presenting part is either the face or, in the case of brow presentation, it is the area between the orbital ridge and the anterior fontanelle. This activity reviews the evaluation and management of these two presentations and explains the role of the interprofessional team in managing delivery safely for both the mother and the baby.

  • Describe the mechanism of labor in the face and brow presentation.
  • Summarize potential maternal and fetal complications during the face and brow presentations.
  • Review different management approaches for the face and brow presentation.
  • Outline some interprofessional strategies that will improve patient outcomes in delivery cases with face and brow presentation issues.
  • Introduction

The term presentation describes the leading part of the fetus or the anatomical structure closest to the maternal pelvic inlet during labor. The presentation can roughly be divided into the following classifications: cephalic, breech, shoulder, and compound. Cephalic presentation is the most common and can be further subclassified as vertex, sinciput, brow, face, and chin. The most common presentation in term labor is the vertex, where the fetal neck is flexed to the chin, minimizing the head circumference.

Face presentation – an abnormal form of cephalic presentation where the presenting part is mentum. This typically occurs because of hyperextension of the neck and the occiput touching the fetal back. Incidence of face presentation is rare, accounting for approximately 1 in 600 of all presentations. [1] [2] [3]

In brow presentation, the neck is not extended as much as in face presentation, and the leading part is the area between the anterior fontanelle and the orbital ridges. Brow presentation is considered the rarest of all malpresentation with a prevalence of 1 in 500 to 1 in 4000 deliveries. [3]

Both face and brow presentations occur due to extension of the fetal neck instead of flexion; therefore, conditions that would lead to hyperextension or prevent flexion of the fetal neck can all contribute to face or brow presentation. These risk factors may be related to either the mother or the fetus. Maternal risk factors are preterm delivery, contracted maternal pelvis, platypelloid pelvis, multiparity, previous cesarean section, black race. Fetal risk factors include anencephaly, multiple loops of cord around the neck, masses of the neck, macrosomia, polyhydramnios. [2] [4] [5]

These malpresentations are usually diagnosed during the second stage of labor when performing a digital examination. It is possible to palpate orbital ridges, nose, malar eminences, mentum, mouth, gums, and chin in face presentation. Based on the position of the chin, face presentation can be further divided into mentum anterior, posterior, or transverse. In brow presentation, anterior fontanelle and face can be palpated except for the mouth and the chin. Brow presentation can then be further described based on the position of the anterior fontanelle as frontal anterior, posterior, or transverse.

Diagnosing the exact presentation can be challenging, and face presentation may be misdiagnosed as frank breech. To avoid any confusion, a bedside ultrasound scan can be performed. [6]  The ultrasound imaging can show a reduced angle between the occiput and the spine or, the chin is separated from the chest. However, ultrasound does not provide much predicting value in the outcome of the labor. [7]

  • Anatomy and Physiology

Before discussing the mechanism of labor in the face or brow presentation, it is crucial to highlight some anatomical landmarks and their measurements. 

Planes and Diameters of the Pelvis

The three most important planes in the female pelvis are the pelvic inlet, mid pelvis, and pelvic outlet. 

Four diameters can describe the pelvic inlet: anteroposterior, transverse, and two obliques. Furthermore, based on the different landmarks on the pelvic inlet, there are three different anteroposterior diameters, named conjugates: true conjugate, obstetrical conjugate, and diagonal conjugate. Only the latter can be measured directly during the obstetric examination. The shortest of these three diameters is obstetrical conjugate, which measures approximately 10.5 cm and is a distance between the sacral promontory and 1 cm below the upper border of the symphysis pubis. This measurement is clinically significant as the fetal head must pass through this diameter during the engagement phase. The transverse diameter measures about 13.5cm and is the widest distance between the innominate line on both sides. 

The shortest distance in the mid pelvis is the interspinous diameter and usually is only about 10 cm. 

Fetal Skull Diameters

There are six distinguished longitudinal fetal skull diameters:

  • Suboccipito-bregmatic: from the center of anterior fontanelle (bregma) to the occipital protuberance, measuring 9.5 cm. This is the presenting diameter in vertex presentation. 
  • Suboccipito-frontal: from the anterior part of bregma to the occipital protuberance, measuring 10 cm 
  • Occipito-frontal: from the root of the nose to the most prominent part of the occiput, measuring 11.5cm
  • Submento-bregmatic: from the center of the bregma to the angle of the mandible, measuring 9.5 cm. This is the presenting diameter in face presentation where the neck is hyperextended. 
  • Submento-vertical: from the midpoint between fontanelles and the angle of the mandible, measuring 11.5cm 
  • Occipito-mental: from the midpoint between fontanelles and the tip of the chin, measuring 13.5 cm. It is the presenting diameter in brow presentation. 

Cardinal Movements of Normal Labor

  • Neck flexion
  • Internal rotation
  • Extension (delivers head)
  • External rotation (Restitution)
  • Expulsion (delivery of anterior and posterior shoulders)

Some of the key movements are not possible in the face or brow presentations.  

Based on the information provided above, it is obvious that labor will be arrested in brow presentation unless it spontaneously changes to face or vertex, as the occipito-mental diameter of the fetal head is significantly wider than the smallest diameter of the female pelvis. Face presentation can, however, be delivered vaginally, and further mechanisms of face delivery will be explained in later sections.

  • Indications

As mentioned previously, spontaneous vaginal delivery can be successful in face presentation. However, the main indication for vaginal delivery in such circumstances would be a maternal choice. It is crucial to have a thorough conversation with a mother, explaining the risks and benefits of vaginal delivery with face presentation and a cesarean section. Informed consent and creating a rapport with the mother is an essential aspect of safe and successful labor.

  • Contraindications

Vaginal delivery of face presentation is contraindicated if the mentum is lying posteriorly or is in a transverse position. In such a scenario, the fetal brow is pressing against the maternal symphysis pubis, and the short fetal neck, which is already maximally extended, cannot span the surface of the maternal sacrum. In this position, the diameter of the head is larger than the maternal pelvis, and it cannot descend through the birth canal. Therefore the cesarean section is recommended as the safest mode of delivery for mentum posterior face presentations. 

Attempts to manually convert face presentation to vertex, manual or forceps rotation of the persistent posterior chin to anterior are contraindicated as they can be dangerous.

Persistent brow presentation itself is a contraindication for vaginal delivery unless the fetus is significantly small or the maternal pelvis is large.

Continuous electronic fetal heart rate monitoring is recommended for face and brow presentations, as heart rate abnormalities are common in these scenarios. One study found that only 14% of the cases with face presentation had no abnormal traces on the cardiotocograph. [8] It is advised to use external transducer devices to prevent damage to the eyes. When internal monitoring is inevitable, it is suggested to place monitoring devices on bony parts carefully. 

People who are usually involved in the delivery of face/ brow presentation are:

  • Experienced midwife, preferably looking after laboring woman 1:1
  • Senior obstetrician 
  • Neonatal team - in case of need for resuscitation 
  • Anesthetic team - to provide necessary pain control (e.g., epidural)
  • Theatre team  - in case of failure to progress and an emergency cesarean section will be required.
  • Preparation

No specific preparation is required for face or brow presentation. However, it is essential to discuss the labor options with the mother and birthing partner and inform members of the neonatal, anesthetic, and theatre co-ordinating teams.

  • Technique or Treatment

Mechanism of Labor in Face Presentation

During contractions, the pressure exerted by the fundus of the uterus on the fetus and pressure of amniotic fluid initiate descent. During this descent, the fetal neck extends instead of flexing. The internal rotation determines the outcome of delivery, if the fetal chin rotates posteriorly, vaginal delivery would not be possible, and cesarean section is permitted. The approach towards mentum-posterior delivery should be individualized, as the cases are rare. Expectant management is acceptable in multiparous women with small fetuses, as a spontaneous mentum-anterior rotation can occur. However, there should be a low threshold for cesarean section in primigravida women or women with large fetuses.

When the fetal chin is rotated towards maternal symphysis pubis as described as mentum-anterior; in these cases further descend through the vaginal canal continues with approximately 73% cases deliver spontaneously. [9] Fetal mentum presses on the maternal symphysis pubis, and the head is delivered by flexion. The occiput is pointing towards the maternal back, and external rotation happens. Shoulders are delivered in the same manner as in vertex delivery.

Mechanism of Labor in Brow Presentation

As this presentation is considered unstable, it is usually converted into a face or an occiput presentation. Due to the cephalic diameter being wider than the maternal pelvis, the fetal head cannot engage; thus, brow delivery cannot take place. Unless the fetus is small or the pelvis is very wide, the prognosis for vaginal delivery is poor. With persistent brow presentation, a cesarean section is required for safe delivery.

  • Complications

As the cesarean section is becoming a more accessible mode of delivery in malpresentations, the incidence of maternal and fetal morbidity and mortality during face presentation has dropped significantly. [10]

However, there are still some complications associated with the nature of labor in face presentation. Due to the fetal head position, it is more challenging for the head to engage in the birth canal and descend, resulting in prolonged labor.

Prolonged labor itself can provoke foetal distress and arrhythmias. If the labor arrests or signs of fetal distress appear on CTG, the recommended next step in management is an emergency cesarean section, which in itself carries a myriad of operative and post-operative complications.

Finally, due to the nature of the fetal position and prolonged duration of labor in face presentation, neonates develop significant edema of the skull and face. Swelling of the fetal airway may also be present, resulting in respiratory distress after birth and possible intubation.

  • Clinical Significance

During vertex presentation, the fetal head flexes, bringing the chin to the chest, forming the smallest possible fetal head diameter, measuring approximately 9.5cm. With face and brow presentation, the neck hyperextends, resulting in greater cephalic diameters. As a result, the fetal head will engage later, and labor will progress more slowly. Failure to progress in labor is also more common in both presentations compared to vertex presentation.

Furthermore, when the fetal chin is in a posterior position, this prevents further flexion of the fetal neck, as browns are pressing on the symphysis pubis. As a result, descend through the birth canal is impossible. Such presentation is considered undeliverable vaginally and requires an emergency cesarean section.

Manual attempts to change face presentation to vertex, manual or forceps rotation to mentum anterior are considered dangerous and are discouraged.

  • Enhancing Healthcare Team Outcomes

A multidisciplinary team of healthcare experts supports the woman and her child during labor and the perinatal period. For a face or brow presentation to be appropriately diagnosed, an experienced midwife and obstetrician must be involved in the vaginal examination and labor monitoring. As fetal anomalies, such as anencephaly or goiter, can contribute to face presentation, sonographers experienced in antenatal scanning should also be involved in the care. It is advised to inform the anesthetic and neonatal teams in advance of the possible need for emergency cesarean section and resuscitation of the neonate. [11] [12]

  • Review Questions
  • Access free multiple choice questions on this topic.
  • Comment on this article.

Disclosure: Julija Makajeva declares no relevant financial relationships with ineligible companies.

Disclosure: Mohsina Ashraf declares no relevant financial relationships with ineligible companies.

This book is distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ), which permits others to distribute the work, provided that the article is not altered or used commercially. You are not required to obtain permission to distribute this article, provided that you credit the author and journal.

  • Cite this Page Makajeva J, Ashraf M. Delivery, Face and Brow Presentation. [Updated 2023 Jan 9]. In: StatPearls [Internet]. Treasure Island (FL): StatPearls Publishing; 2024 Jan-.

In this Page

Bulk download.

  • Bulk download StatPearls data from FTP

Related information

  • PubMed Links to PubMed

Similar articles in PubMed

  • Sonographic diagnosis of fetal head deflexion and the risk of cesarean delivery. [Am J Obstet Gynecol MFM. 2020] Sonographic diagnosis of fetal head deflexion and the risk of cesarean delivery. Bellussi F, Livi A, Cataneo I, Salsi G, Lenzi J, Pilu G. Am J Obstet Gynecol MFM. 2020 Nov; 2(4):100217. Epub 2020 Aug 18.
  • Review Sonographic evaluation of the fetal head position and attitude during labor. [Am J Obstet Gynecol. 2022] Review Sonographic evaluation of the fetal head position and attitude during labor. Ghi T, Dall'Asta A. Am J Obstet Gynecol. 2022 Jul 6; . Epub 2022 Jul 6.
  • Stages of Labor. [StatPearls. 2024] Stages of Labor. Hutchison J, Mahdy H, Hutchison J. StatPearls. 2024 Jan
  • Leopold Maneuvers. [StatPearls. 2024] Leopold Maneuvers. Superville SS, Siccardi MA. StatPearls. 2024 Jan
  • Review Labor with abnormal presentation and position. [Obstet Gynecol Clin North Am. ...] Review Labor with abnormal presentation and position. Stitely ML, Gherman RB. Obstet Gynecol Clin North Am. 2005 Jun; 32(2):165-79.

Recent Activity

  • Delivery, Face and Brow Presentation - StatPearls Delivery, Face and Brow Presentation - StatPearls

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

Connect with NLM

National Library of Medicine 8600 Rockville Pike Bethesda, MD 20894

Web Policies FOIA HHS Vulnerability Disclosure

Help Accessibility Careers

statistics

Vertex Presentation: How does it affect your labor & delivery?

Medically Reviewed by: Dr. Veena Shinde (M.D, D.G.O,  PG – Assisted Reproductive Technology (ART) from Warick, UK) Mumbai, India

Khushboo Kirale

  • >> Post Created: February 11, 2022
  • >> Last Updated: April 13, 2024

Vertex Presentation

Vertex Position - Table of Contents

As you approach the due date for your baby’s delivery, the excitement and apprehensions are at their peak! What probably adds to the anxieties are the medical terms describing the baby, its ‘position’ and ‘presentation.’ Let’s strike that out from the list now!

In simple words, ‘ position ’ of the baby is always in reference to the mother ; on what side of the mother’s pelvis does the baby lean more (left or right) and if the baby is facing the mother’s spine or belly (anterior or posterior) – for eg.: Left Occiput Anterior , Right Occiput Anterior , Right Occiput Posterior and so on.

On the other hand, ‘ presentation’ is the body part of baby (head, shoulder, feet, and buttocks) that will enter the mother’s pelvic region first at the beginning of labor.

As ‘ presentation’ depends on the ‘ position’ of the baby, the terms cannot be used interchangeably, which is often mistakenly done. If you are told by your doctor that your baby is in a head-down position , which means its head will enter the pelvic region first , then it means the baby is in ‘vertex’ presentation or even sometimes loosely referred to as vertex position of baby though its conceptually incorrect however it means the same.

With this article, we aim to explain how exactly vertex presentation affects your labor and delivery.

Understanding Vertex Presentation

If your baby is in the head-down position by the third trimester, then you are one of the 95% mothers who have a vertex baby or a vertex delivery. When the baby enters the birth canal head first, then the top part of the head is called the ‘vertex.’

In exact medical terms, we give you the definition of vertex presentation by the American College of Obstetrics and Gynecologists (ACOG) – “a fetal presentation where the head is presenting first in the pelvic inlet.”

Besides vertex presentation (also sometimes referred to as vertex position of baby or vertex fetal position also), the other occasional presentations (non-vertex presentations) include –

  • Breech – baby’s feet or buttocks are down and first to enter the mother’s pelvic region. Head is near the mother’s ribs
  • Transverse – baby’s shoulder, arm or even the trunk are the first to enter the pelvis, as the baby is laying on the side and not in a vertical position 

It is common that babies turn to a particular position (hence, affecting the presentation) by 34 -36 weeks of pregnancy. Nevertheless, some babies have ‘unstable lies’ ; – wherein the baby keeps changing positions towards the end of the pregnancy and not remaining in any one position for long.

Should you be worried if the baby is in vertex presentation?

Absolutely not! The vertex presentation is not only the most common, but also the best for a smooth delivery. In fact, the chances of a vaginal delivery are better if you have a vertex fetal position.

By 36 weeks into pregnancy, about 95% of the babies position themselves to have the vertex presentation. However, if your baby hasn’t come into the vertex fetal position by this time, then you can talk to your doctor about the options.

You may be suggested a cephalic version procedure   also known as the version procedure /external cephalic version (ECV procedure) – which is used to turn the baby/ fetus from a malpresentation – like breech, oblique or transverse (which occur just about 3-4% times) to the cephalic position (head down).

This is how your doctor will try to turn your baby manually by pushing on your belly to get the baby into the vertex presentation. But it is necessary for you to know that this procedure does involve some risk and is successful only 60-70% of the time.

Continue reading below ↓

Read this next

Placenta Placement

Everything you need to know about Placenta Position & Placenta Health – with FAQs

Baby Must Haves 3

The Ultimate List of Baby Must Haves

Buying Bulk Diapers Diapers on Sale

Looking for Diapers on Sale? Here’s where you can get great diaper deals on buying bulk diapers

Risks of vertex position of baby: can there be any complications for the baby in the vertex presentation.

As discussed above, the vertex fetal position/presentation is the best for labor and delivery, but there can be some complications as the baby makes its way through the birth canal. One such complication can arise if the baby is on the larger side. The baby can face difficulty while passing through the birth canal even if it is in the head-down position because of the size.

Babies who weigh over 9 to 10 pounds are called ‘ macrosomic’ or even referred to as fetal macrosomia , and they are at a higher risk of getting their shoulders stuck in the birth canal during delivery, despite being in the head-down position.

In such cases, to avoid birth trauma for the baby, the American College of Obstetricians and Gynecologists (ACOG) suggests that cesarean deliveries should be limited to estimated fetal weights of at least 11 pounds in women without diabetes and about 9 pounds in women with diabetes.

In case of fetal macrosomia, your doctor will monitor your pregnancy more often and work out a particular birth plan for you subject to your age (mothers age) and size of your baby.

How will I deliver a baby in the vertex fetal position?

Even unborn human babies can astonish you if you observe the way they make their way through the birth canal during delivery.

A vertex baby may be in the optimal position ( head-down first in pelvis) for labor and delivery, but it does its own twisting and turning while passing through the birth canal to fit through. In humans, unlike other mammals, the ratio of the baby’s head to the space in the birth canal is quite limited.

The baby has to flex and turn its head in different positions to fit through and ultimately arrive in this world. And it does so successfully! It is a wonder how they know how to do this so naturally.

And to answer the question ‘how will I deliver a baby in the vertex position?’ – Simply NATURALLY i.e. vaginal delivery. Don’t worry, follow your doctor’s instructions, do your breathing and PUSH.

FAQs to keep ready: How can my doctor help me prepare as I approach my due date?

As your due date nears, apart from bodily discomfort, you may experience nervousness about the big day. Your doctor can help by clearing your doubts and putting you at ease. You can ask them the following questions to understand the process better.

Q1) How will I know if my baby is in vertex fetal position?

A doctor can confidently tell you whether or not your baby is in the vertex presentation. Many medical professionals will be able to determine your baby’s position merely by using their hands; this is called ‘Leopold’s maneuvers.’

However, in case they aren’t very confident about the baby’s position even after this, then an ultrasound can confirm the exact position of the baby.

You can also understand this through belly mapping . You are sure to feel the kicks towards the top of your stomach and head (distinct hard circular feel) towards your pelvis. 

Q2)Is there any risk of my vertex baby turning and changing positions?

Yes, in case of some women, the baby who has a vertex presentation may turn at the last moment.

What may cause this? Women who have extra amniotic fluid (polyhydramnios) have increased chances of a vertex baby turning into a breech baby at the last minute.

Discuss this with your doctor to understand what are the chances this might happen to you and what all you can do to keep the baby in the vertex presentation for delivery.

Q3) Is there need to be worried if my baby has a breech presentation?

Not really! There are loads of exercises which you which can help you get your baby in the right position.

Then there are the ECV (external cephalic version) procedure which can help in changing the position of your baby into the desired vertex position. Speak with your doctor.

Having a baby in breech position just before labor will require you to have a C-section . Let your doctor guide you. But there is nothing to worry about.

Q4) What may cause babies to come into breech position?

A few circumstances may cause the baby to come into breech position even after 36 weeks into pregnancy.

  • If you are carrying twins or multiple babies , in which case there is limited space for each baby to move around.
  • Low levels of amniotic fluid which restricts the free movement of the baby or even high levels of amniotic fluid that does not permit the baby to remain in any one position.
  • If there are abnormalities in the uterus or other conditions like low-lying placenta or large fibroids in the lower part of the uterus.

Chances of breech babies are higher in births that are pre-term as the baby does not get enough time to flip into a head-down position – cephalic position – vertex presentation (vertex position of baby/ vertex fetal position).

Q5) Can a baby turn from breech position to vertex presentation?

Yes, a baby can turn from a breech position to vertex position / vertex fetal position over time with exercises and sometimes through ECV.

If an ultrasound has confirmed you have a breech baby, then you can do the following to turn it to a vertex baby. Try the following –

  • Do not underestimate the wonders of daily walks of about 45-60 mins when it comes to bringing your baby in vertex presentation from breech presentation.
  • Talk to your doctor about certain exercises that can help turn your baby in the head-down position. Exercises like ‘ high bridge’ or ‘cat and camel’ can help here. We recommend you to learn and try this only in the presence of a professional.
  • External Cephalic Version (ECV ) is a way to manually maneuver the baby to vertex presentation. It is done with the help of an ultrasound and generally after 36 weeks into pregnancy. However, it has the success rate of just 50%. Discuss the risks, if any, with your gynecologist before opting for this procedure.

There are a couple of other unscientific methods that may not be safe to try –

  • Light : Placing a torch near your vagina may guide the baby toward the light, and hence, get it in the vertex presentation.
  • Music : Playing music near your belly’s bottom may urge the baby to move itself in the head-down position.

Q6) What all can I do to ensure I have a healthy delivery?

A healthy delivery requires the mother to be active, eating well, and staying happy. For any apprehensions regarding labor and delivery, do not hesitate to talk to your doctor and clarify your doubts.

Your doctor can help you understand your baby’s position and presentation, and then based on that they can plan your delivery to ensure your baby’s birth will happen in the safest possible way.

Try and maintain a healthy lifestyle which will also help in overall of your child and placenta health .

Key Takeaway

Yes, vertex presentation or vertex position of baby and vertex delivery are very common, normal, safe, and the best for labor and delivery of the baby. There is probability of complications sometimes, but that is only subject to certain conditions that we discussed above.

However, understand that any other baby position is also safe. The only thing with other positions and presentations is that the chances of a cesarean delivery goes up. Nevertheless, know what matters at the end of it all is a happy and healthy baby in your arms!

Happy pregnancy!

Khushboo Kirale

Khushboo Kirale

You may also be interested in.

Sequential Screening – Why is it so important for you to get it done

Sequential Screening – Why is it so important for you to get it done?

Placenta Previa - Low lying Placenta

Placenta Previa or Low Lying Placenta: How much should you be concerned?

Lateral Placenta

Lateral Placenta: How does this placenta position impact pregnancy and delivery?

hCG Levels Twins

hCG levels twins vs. singleton – What’s the difference?

Fundal Placenta

Fundal Placenta: Does Placenta on Top Make Pregnancy Difficult?

Anterior Placenta - Placenta Anterior - Placenta in front

Anterior Placenta Position – How It Affects Pregnancy, Labor and Delivery

Subscribe to get our latest posts on parenting and we will make sure you don’t miss a thing!

Privacy Policy - Terms and Conditions

  • Trying to Conceive
  • Signs & Symptoms
  • Pregnancy Tests
  • Fertility Testing
  • Fertility Treatment
  • Weeks & Trimesters
  • Staying Healthy
  • Preparing for Baby
  • Complications & Concerns
  • Pregnancy Loss
  • Breastfeeding
  • School-Aged Kids
  • Raising Kids
  • Personal Stories
  • Everyday Wellness
  • Safety & First Aid
  • Immunizations
  • Food & Nutrition
  • Active Play
  • Pregnancy Products
  • Nursery & Sleep Products
  • Nursing & Feeding Products
  • Clothing & Accessories
  • Toys & Gifts
  • Ovulation Calculator
  • Pregnancy Due Date Calculator
  • How to Talk About Postpartum Depression
  • Editorial Process
  • Meet Our Review Board

Vertex Position: What It Is, Why It's Important, and How to Get There

Jamie Grill / Getty Images

What Is the Vertex Position?

  • Why It's Important

When the Vertex Position Usually Occurs

  • How to Get Baby in This Position

Options if Baby Is Not in the Vertex Position

While you are pregnant, you may hear your healthcare provider frequently refer to the position or presentation of your baby, particularly as you get closer to your due date . What they are referring to is which part of your baby is presenting first—or which part is at the lower end of your womb or the pelvic inlet.

Consequently, when they tell you that your baby's head is down, that likely means they are in the vertex position (or another cephalic position). This type of presentation is the most common presentation in the third trimester. Here is what you need to know about the vertex position including how you might get your baby into that position before you go into labor .

The vertex position is a medical term that means the fetus has its head down in the maternal pelvis and the occipital (back) portion of the fetal skull is in the lowest position or presenting, explains Jill Purdie, MD, an OB/GYN and medical director at Northside Women’s Specialists , which is part of Pediatrix Medical Group.

When a baby is in the vertex position, their head is in the down position in the pelvis in preparation for a vaginal birth, adds Shaghayegh DeNoble, MD, FACOG , a board-certified gynecologist and a fellowship-trained minimally invasive gynecologic surgeon. "More specifically, the fetus’s chin is tucked to the chest so that the back of the head is presenting first."

Why the Vertex Position Is Important

When it comes to labor and delivery, the vertex position is the ideal position for a vaginal delivery, especially if the baby is in the occiput anterior position—where the back of the baby's head is toward the front of the pregnant person's pelvis, says Dr. DeNoble.

"[This] is the best position for vaginal birth because it is associated with fewer Cesarean sections , faster births, and less painful births," she says. "In this position, the fetus’s skull fits the birth canal best. In the occiput posterior position, the back of the fetus's head is toward the [pregnant person's] spine. This position is usually associated with longer labor and sometimes more painful birth."

Other fetal positions are sometimes less-than-ideal for labor and delivery. According to Dr. DeNoble, they can cause more prolonged labor, fetal distress, and interventions such as vacuum or forceps delivery and Cesarean delivery.

"Another important fact is that positions other than vertex present an increased risk of cord prolapse, which is when the umbilical cord falls into the vaginal canal ahead of the baby," she says. "For example, if the fetus is in the transverse position and the [pregnant person's] water breaks , there is an increased risk of the umbilical cord prolapsing through the cervix into the vaginal canal."

When it comes to your baby's positioning, obstetricians will look to see what part of the fetus is in position to present during vaginal birth. If your baby’s head is down during labor, they will look to see if the back of the head is facing your front or your back as well as whether the back of the head is presenting or rather face or brow, Dr. DeNoble explains.

"These determinations are important during labor, especially if there is consideration to the use of a vacuum or forceps," she says.

According to Dr. Purdie, healthcare providers will begin assessing the position of the baby as early as 32 to 34 weeks of pregnancy. About 75% to 80% of fetuses will be in the vertex presentation by 30 weeks and 96% to 97% by 37 weeks. Approximately 3% to 4% of fetuses will be in a non-cephalic position at term, she adds.

Typically, your provider will perform what is called Leopold maneuvers to determine the position of the baby. "Leopold maneuvers involve the doctor placing their hands on the gravid abdomen in several locations to find the fetal head and buttocks," Dr. Purdie explains.

If your baby is not in the vertex position, the next most common position would be breech, she says. This means that your baby's legs or buttocks are presenting first and the head is up toward the rib cage.

"The fetus may also be transverse," Dr. Purdie says. "The transverse position means the fetus is sideways within the uterus and no part is presenting in the maternal pelvis. In other words, the head is either on the left or right side of the uterus and the fetus goes straight across to the opposite side."

There is even a chance that your baby will be in an oblique position. This means they are at a diagonal within the uterus, Dr. Purdie says. "In this position, either the head or the buttocks can be down, but they are not in the maternal pelvis and instead off to the left or right side."

If your baby's head is not down, your provider will look to see if the buttocks are in the pelvis or one or two feet, Dr. DeNoble adds. "If the baby is laying horizontally, then the doctor needs to know if the back of the baby is facing downwards or upwards since at a Cesarean delivery it can be more difficult to deliver the baby when the back is down."

How to Get Baby Into the Vertex Position

One way you can help ensure that your baby gets into the vertex position is by staying active and walking, Dr. Purdie says. "Since the head is the heaviest part of the fetus, gravity may help move the head around to the lowest position."

If you already know that your baby is in a non-cephalic position and you are getting close to your delivery date, you also can try some techniques to encourage the baby to turn. For instance, Dr. Purdie suggests getting in the knee/chest position for 10 minutes per day. This has been shown to turn the baby around 60% to 70% of the time.

"In this technique, the mother gets on all fours, places her head down on her hands, and leaves her buttock higher than her head," she explains. "Again, we are trying to allow gravity to help us turn the fetus."

You also might consider visiting a chiropractor to try and help turn the fetus. "Most chiropractors will use the Webster technique to encourage the fetus into a cephalic presentation," Dr. Purdie adds.

There also are some home remedies, including using music, heat, ice, and incense to encourage the fetus to turn, she says. "These techniques do not have a lot of scientific data to support them, but they also are not harmful so can be tried without concern."

You also can try the pelvic tilt , where you lay on your back with your legs bent and your feet on the ground, suggests Dr. DeNoble. Then, you tilt your pelvis up into a bridge position and stay in this position for 10 minutes. She suggests doing this several times a day, ideally when your baby is most active.

"Another technique that has helped some women is to place headphones low down on the abdomen near the pubic bone to encourage the baby to turn toward the sound," Dr. DeNoble adds. "A cold bag of vegetables can be placed at the top of the uterus near the baby’s head and something warm over the lower part of the uterus to encourage the baby to turn toward the warmth. [And] acupuncture has also been used to help turn a baby into a vertex position."

If you are at term and your baby is not in the vertex position (or some type of cephalic presentation), you may want to discuss the option of an external cephalic version (ECV), suggests Dr. Purdie. This is a procedure done in the hospital where your healthcare provider will attempt to manually rotate your baby into the cephalic presentation.

"There are some risks associated with this and not every pregnant person is a candidate, so the details should be discussed with your physician," she says. "If despite interventions, the fetus remains in a non-cephalic position, most physicians will recommend a C-section for delivery."

Keep in mind that there are increased risks for your baby associated with a vaginal breech delivery. Current guidelines by the American College of Obstetricians and Gynecologists recommend a C-section in this situation, Dr. Purdie says.

"Once a pregnant person is in labor, it would be too late for the baby to get in cephalic presentation," she adds.

A Word From Verywell

If your baby is not yet in the vertex position, try not to worry too much. The majority of babies move into either the vertex position or another cephalic presentation before they are born. Until then, focus on staying active, getting plenty of rest, and taking care of yourself.

If you are concerned, talk to your provider about different options for getting your baby to move into the vertex position. They can let you know which tips and techniques might be right for your situation.

American College of Obstetrics and Gynecology. Obstetrics data definitions .

National Library of Medicine. Vaginal delivery .

Sayed Ahmed WA, Hamdy MA. Optimal management of umbilical cord prolapse .  Int J Womens Health . 2018;10:459-465. Published 2018 Aug 21. doi:10.2147/IJWH.S130879

Hjartardóttir H, Lund SH, Benediktsdóttir S, Geirsson RT, Eggebø TM. When does fetal head rotation occur in spontaneous labor at term: results of an ultrasound-based longitudinal study in nulliparous women .  Am J Obstet Gynecol . 2021;224(5):514.e1-514.e9. doi:10.1016/j.ajog.2020.10.054

Management of breech presentation: green-top guideline no. 20b .  BJOG: Int J Obstet Gy . 2017;124(7):e151-e177. doi:10.1111/1471-0528.14465

Kenfack B, Ateudjieu J, Ymele FF, Tebeu PM, Dohbit JS, Mbu RE. Does the advice to assume the knee-chest position at the 36th to 37th weeks of gestation reduce the incidence of breech presentation at delivery?   Clinics in Mother and Child Health . 2012;9:1-5. doi:10.4303/cmch/C120601

Cohain JS. Turning breech babies after 34 weeks: the if, how, & when of turning breech babies .  Midwifery Today Int Midwife . 2007;(83):18-65.

American College of Obstetrics and Gynecology. If your baby is breech .

By Sherri Gordon Sherri Gordon, CLC is a published author, certified professional life coach, and bullying prevention expert. 

Medical Information

Delivery, Face Presentation, and Brow Presentation: Understanding Fetal Positions and Birth Scenarios

Delivery, Face Presentation, and Brow Presentation: Understanding Fetal Positions and Birth Scenarios

Introduction:.

During childbirth, the position of the baby plays a significant role in the delivery process. While the most common fetal presentation is the head-down position (vertex presentation), variations can occur, such as face presentation and brow presentation. This comprehensive article aims to provide a thorough understanding of delivery, face presentation, and brow presentation, including their definitions, causes, complications, and management approaches.

Delivery Process:

  • Normal Vertex Presentation: In a typical delivery, the baby is positioned head-down, with the back of the head (occiput) leading the way through the birth canal.
  • Engagement and Descent: Prior to delivery, the baby's head engages in the pelvis and gradually descends, preparing for birth.
  • Cardinal Movements: The baby undergoes a series of cardinal movements, including flexion, internal rotation, extension, external rotation, and restitution, which facilitate the passage through the birth canal.

Face Presentation:

  • Definition: Face presentation occurs when the baby's face is positioned to lead the way through the birth canal instead of the vertex (head).
  • Causes: Face presentation can occur due to factors such as abnormal fetal positioning, multiple pregnancies, uterine abnormalities, or maternal pelvic anatomy.
  • Complications: Face presentation is associated with an increased risk of prolonged labor, difficulties in delivery, increased fetal malposition, birth injuries, and the need for instrumental delivery.
  • Management: The management of face presentation depends on several factors, including the progression of labor, the size of the baby, and the expertise of the healthcare provider. Options may include closely monitoring the progress of labor, attempting a vaginal delivery with careful maneuvers, or considering a cesarean section if complications arise.

Brow Presentation:

  • Definition: Brow presentation occurs when the baby's head is partially extended, causing the brow (forehead) to lead the way through the birth canal.
  • Causes: Brow presentation may result from abnormal fetal positioning, poor engagement of the fetal head, or other factors that prevent full flexion or extension.
  • Complications: Brow presentation is associated with a higher risk of prolonged labor, difficulty in descent, increased chances of fetal head entrapment, birth injuries, and the potential need for instrumental delivery or cesarean section.
  • Management: The management of brow presentation depends on various factors, such as cervical dilation, progress of labor, fetal size, and the presence of complications. Close monitoring, expert assessment, and a multidisciplinary approach may be necessary to determine the safest delivery method, which can include vaginal delivery with careful maneuvers, instrumental assistance, or cesarean section if warranted.

Delivery Techniques and Intervention:

  • Obstetric Maneuvers: In certain situations, skilled healthcare providers may use obstetric maneuvers, such as manual rotation or the use of forceps or vacuum extraction, to facilitate delivery, reposition the baby, or prevent complications.
  • Cesarean Section: In cases where vaginal delivery is not possible or poses risks to the mother or baby, a cesarean section may be performed to ensure a safe delivery.

Conclusion:

Delivery, face presentation, and brow presentation are important aspects of childbirth that require careful management and consideration. Understanding the definitions, causes, complications, and appropriate management approaches associated with these fetal positions can help healthcare providers ensure safe and successful deliveries. Individualized care, close monitoring, and multidisciplinary collaboration are crucial in optimizing maternal and fetal outcomes during these unique delivery scenarios.

Hashtags: #Delivery #FacePresentation #BrowPresentation #Childbirth #ObstetricDelivery

On the Article

Krish Tangella MD, MBA picture

Krish Tangella MD, MBA

Alexander Enabnit picture

Alexander Enabnit

Alexandra Warren picture

Alexandra Warren

Please log in to post a comment.

Related Articles

Test your knowledge, asked by users, related centers, related specialties, related physicians, related procedures, related resources, join dovehubs.

and connect with fellow professionals

Related Directories

At DoveMed, our utmost priority is your well-being. We are an online medical resource dedicated to providing you with accurate and up-to-date information on a wide range of medical topics. But we're more than just an information hub - we genuinely care about your health journey. That's why we offer a variety of products tailored for both healthcare consumers and professionals, because we believe in empowering everyone involved in the care process. Our mission is to create a user-friendly healthcare technology portal that helps you make better decisions about your overall health and well-being. We understand that navigating the complexities of healthcare can be overwhelming, so we strive to be a reliable and compassionate companion on your path to wellness. As an impartial and trusted online resource, we connect healthcare seekers, physicians, and hospitals in a marketplace that promotes a higher quality, easy-to-use healthcare experience. You can trust that our content is unbiased and impartial, as it is trusted by physicians, researchers, and university professors around the globe. Importantly, we are not influenced or owned by any pharmaceutical, medical, or media companies. At DoveMed, we are a group of passionate individuals who deeply care about improving health and wellness for people everywhere. Your well-being is at the heart of everything we do.

For Patients

For professionals, for partners.

Appointments at Mayo Clinic

  • Pregnancy week by week
  • Fetal presentation before birth

The way a baby is positioned in the uterus just before birth can have a big effect on labor and delivery. This positioning is called fetal presentation.

Babies twist, stretch and tumble quite a bit during pregnancy. Before labor starts, however, they usually come to rest in a way that allows them to be delivered through the birth canal headfirst. This position is called cephalic presentation. But there are other ways a baby may settle just before labor begins.

Following are some of the possible ways a baby may be positioned at the end of pregnancy.

Head down, face down

When a baby is head down, face down, the medical term for it is the cephalic occiput anterior position. This the most common position for a baby to be born in. With the face down and turned slightly to the side, the smallest part of the baby's head leads the way through the birth canal. It is the easiest way for a baby to be born.

Illustration of the head-down, face-down position

Head down, face up

When a baby is head down, face up, the medical term for it is the cephalic occiput posterior position. In this position, it might be harder for a baby's head to go under the pubic bone during delivery. That can make labor take longer.

Most babies who begin labor in this position eventually turn to be face down. If that doesn't happen, and the second stage of labor is taking a long time, a member of the health care team may reach through the vagina to help the baby turn. This is called manual rotation.

In some cases, a baby can be born in the head-down, face-up position. Use of forceps or a vacuum device to help with delivery is more common when a baby is in this position than in the head-down, face-down position. In some cases, a C-section delivery may be needed.

Illustration of the head-down, face-up position

Frank breech

When a baby's feet or buttocks are in place to come out first during birth, it's called a breech presentation. This happens in about 3% to 4% of babies close to the time of birth. The baby shown below is in a frank breech presentation. That's when the knees aren't bent, and the feet are close to the baby's head. This is the most common type of breech presentation.

If you are more than 36 weeks into your pregnancy and your baby is in a frank breech presentation, your health care professional may try to move the baby into a head-down position. This is done using a procedure called external cephalic version. It involves one or two members of the health care team putting pressure on your belly with their hands to get the baby to roll into a head-down position.

If the procedure isn't successful, or if the baby moves back into a breech position, talk with a member of your health care team about the choices you have for delivery. Most babies in a frank breech position are born by planned C-section.

Illustration of the frank breech position

Complete and incomplete breech

A complete breech presentation, as shown below, is when the baby has both knees bent and both legs pulled close to the body. In an incomplete breech, one or both of the legs are not pulled close to the body, and one or both of the feet or knees are below the baby's buttocks. If a baby is in either of these positions, you might feel kicking in the lower part of your belly.

If you are more than 36 weeks into your pregnancy and your baby is in a complete or incomplete breech presentation, your health care professional may try to move the baby into a head-down position. This is done using a procedure called external cephalic version. It involves one or two members of the health care team putting pressure on your belly with their hands to get the baby to roll into a head-down position.

If the procedure isn't successful, or if the baby moves back into a breech position, talk with a member of your health care team about the choices you have for delivery. Many babies in a complete or incomplete breech position are born by planned C-section.

Illustration of a complete breech presentation

When a baby is sideways — lying horizontal across the uterus, rather than vertical — it's called a transverse lie. In this position, the baby's back might be:

  • Down, with the back facing the birth canal.
  • Sideways, with one shoulder pointing toward the birth canal.
  • Up, with the hands and feet facing the birth canal.

Although many babies are sideways early in pregnancy, few stay this way when labor begins.

If your baby is in a transverse lie during week 37 of your pregnancy, your health care professional may try to move the baby into a head-down position. This is done using a procedure called external cephalic version. External cephalic version involves one or two members of your health care team putting pressure on your belly with their hands to get the baby to roll into a head-down position.

If the procedure isn't successful, or if the baby moves back into a transverse lie, talk with a member of your health care team about the choices you have for delivery. Many babies who are in a transverse lie are born by C-section.

Illustration of baby lying sideways

If you're pregnant with twins and only the twin that's lower in the uterus is head down, as shown below, your health care provider may first deliver that baby vaginally.

Then, in some cases, your health care team may suggest delivering the second twin in the breech position. Or they may try to move the second twin into a head-down position. This is done using a procedure called external cephalic version. External cephalic version involves one or two members of the health care team putting pressure on your belly with their hands to get the baby to roll into a head-down position.

Your health care team may suggest delivery by C-section for the second twin if:

  • An attempt to deliver the baby in the breech position is not successful.
  • You do not want to try to have the baby delivered vaginally in the breech position.
  • An attempt to move the baby into a head-down position is not successful.
  • You do not want to try to move the baby to a head-down position.

In some cases, your health care team may advise that you have both twins delivered by C-section. That might happen if the lower twin is not head down, the second twin has low or high birth weight as compared to the first twin, or if preterm labor starts.

Illustration of twins before birth

  • Landon MB, et al., eds. Normal labor and delivery. In: Gabbe's Obstetrics: Normal and Problem Pregnancies. 8th ed. Elsevier; 2021. https://www.clinicalkey.com. Accessed May 19, 2023.
  • Holcroft Argani C, et al. Occiput posterior position. https://www.updtodate.com/contents/search. Accessed May 19, 2023.
  • Frequently asked questions: If your baby is breech. American College of Obstetricians and Gynecologists https://www.acog.org/womens-health/faqs/if-your-baby-is-breech. Accessed May 22, 2023.
  • Hofmeyr GJ. Overview of breech presentation. https://www.updtodate.com/contents/search. Accessed May 22, 2023.
  • Strauss RA, et al. Transverse fetal lie. https://www.updtodate.com/contents/search. Accessed May 22, 2023.
  • Chasen ST, et al. Twin pregnancy: Labor and delivery. https://www.updtodate.com/contents/search. Accessed May 22, 2023.
  • Cohen R, et al. Is vaginal delivery of a breech second twin safe? A comparison between delivery of vertex and non-vertex second twins. The Journal of Maternal-Fetal & Neonatal Medicine. 2021; doi:10.1080/14767058.2021.2005569.
  • Marnach ML (expert opinion). Mayo Clinic. May 31, 2023.

Products and Services

  • A Book: Obstetricks
  • A Book: Mayo Clinic Guide to a Healthy Pregnancy
  • 3rd trimester pregnancy
  • Fetal development: The 3rd trimester
  • Overdue pregnancy
  • Pregnancy due date calculator
  • Prenatal care: 3rd trimester

Mayo Clinic does not endorse companies or products. Advertising revenue supports our not-for-profit mission.

  • Opportunities

Mayo Clinic Press

Check out these best-sellers and special offers on books and newsletters from Mayo Clinic Press .

  • Mayo Clinic on Incontinence - Mayo Clinic Press Mayo Clinic on Incontinence
  • The Essential Diabetes Book - Mayo Clinic Press The Essential Diabetes Book
  • Mayo Clinic on Hearing and Balance - Mayo Clinic Press Mayo Clinic on Hearing and Balance
  • FREE Mayo Clinic Diet Assessment - Mayo Clinic Press FREE Mayo Clinic Diet Assessment
  • Mayo Clinic Health Letter - FREE book - Mayo Clinic Press Mayo Clinic Health Letter - FREE book
  • Healthy Lifestyle

Your gift holds great power – donate today!

Make your tax-deductible gift and be a part of the cutting-edge research and care that's changing medicine.

  • Cancer care
  • Critical Care
  • Diabetic care
  • Kidney Failure
  • General Health
  • Health & Fitness
  • Health Awareness Days
  • Health Tips
  • Kids Health
  • Men’s Health
  • Women’s Health
  • COVID-19 Vaccine Updates
  • COVID19-FAQ
  • Tests & Procedures
  • Sign in / Join

vertex presentation is normal

Vertex Presentation : Types, Positions, Complications and Risks

Avatar

Do not ignore your symptoms!

Find out what could be causing them

vertex presentation is normal

Overview 

When babies are about to enter the world, they are either in a vertex, breech, or transverse position. A vertex position means the baby is head-down in the pelvic region, which is the position a baby is required to be during vaginal delivery. 

This blog talks about the vertex position, complications, and the other types of positions the baby can be during delivery. 

What is the vertex position? 

As mentioned earlier, a vertex position is a baby’s position during vaginal delivery. The baby moves into the vertex position  between the 33 rd – 36 th week of pregnancy. In this position, the baby’s head comes out first through the vagina during delivery. However, it is vital to know that the baby can present with other positions like breech (feet-first position) or transverse (lying sideways) position. In such cases, the healthcare provider may suggest alternate birth plans to deliver the baby safely.   

How is a baby delivered in the vertex position?  

When a baby is in a vertex position, it moves through the birth canal and comes out through the vagina. Unlike other mammals that have wider birth canals, humans have smaller ones. Due to the tight space in the birth canal, the baby tends to flex their heads in different ways to fit into the area and enter the world. However, the chances of the baby changing position at the last minute reduce drastically when the baby’s head fits inside the birth canal. The baby can switch to a vertex position anytime during delivery even if it is in a breech or transverse position.

When to seek medical advice?

A pregnant woman can seek medical advice to clear any doubts or clarifications.

What are the other positions a baby may lie in the womb?  

As already mentioned, unborn babies may also assume breech or transverse positions in the womb. The following gives a detailed explanation of both.

Breech Position

In this position, the babies lie in the womb pointing their feet or buttocks toward the vagina of the mother. If the baby stays in a breech position even after 36 weeks of pregnancy, the healthcare provider may try External Cephalic Version (ECV) on the mother. ECV refers to external pressure on the belly to change the baby’s position to a vertex. This procedure is painful for the mother, but it is the safest way to keep the baby in place. In almost 50% of the cases, ECV works and assists the baby in moving into a vertex position. 

In case of vaginal bleeding , the irregular heartbeat of the baby, broken water, or multiple pregnancies, ECV is not recommended. Also, ECV should not be performed if the baby is bigger or smaller than usual, if the placenta is low or if the mother develops high blood pressure and organ damage. The healthcare provider may recommend C-section to deliver the baby in such cases. 

Transverse Position

The baby is lying across the uterus during delivery. The doctors may recommend an ECV procedure. If ECV fails, the healthcare provider may deliver the baby through a C-section .

Can complications happen even when the baby is in the vertex position? 

Even though the vertex position is the correct way a baby should lie during delivery, there are chances of complications. If the baby weighs more than 4.5 kg, it becomes challenging for the baby to manoeuvre out of the birth canal. The shoulders of heavy babies may face trouble moving down the canal. For such babies, doctors regularly conduct checks and are extra cautious during prenatal visits and at the time of birth. For babies above 5 kg, they may recommend alternate delivery options to avoid trauma for both the baby and the mother.  

What are the risks associated with the Breech and Transverse position of the baby? 

Breech and transverse positions can lead to many complications, such as the following:  

ECV issues : While the healthcare provider performs ECV to shift the baby’s position into a vertex position, it may rupture the amniotic sac or tear the placenta. Sometimes it may change the baby’s heartbeat or may induce early labour.  

Problems with breech birth : In the breech position, the baby isn’t able to push the cervical muscles of the mother to come out. Their shoulders or heads may get stuck or impaled by the mother’s pelvis. Also, the umbilical cord may enter the vagina before the baby, reducing blood and oxygen flow to the baby.    

Conclusion 

Vertex position is the right way a baby should lie in the womb during delivery. It doesn’t mean that vertex position does not cause complications. It is crucial to seek expert advice during pregnancy to clarify doubts and address all concerns.  

Frequently Asked Questions (FAQs)

Will the baby turn after being in a vertex position .

Even when the baby is in the proper vertex position, there are chances of them turning to other positions. Expectant mothers with excess amniotic fluid may be a risk of a vertex-positioned baby suddenly becoming breech. Consult the healthcare provider and ask what can be done about keeping the baby in the proper position until delivery.  

How to know if a pregnant woman is having a vertex-positioned baby? 

All healthcare professionals are trained to feel the baby’s position with their hands. This method is known as Leopold’s moves, and they may help find if the baby has a positioned vertex. An ultrasound test also helps precisely find and confirm the baby’s position.  

Avatar

What is Ultrasonography or Ultrasound? – Types and Role

High Blood Pressure or Hypertension: Causes, Symptoms and Treatment

Vaginal Bleeding – Symptoms, Causes and Treatment

Breast Cancer: Early Detection Saves Lives

Do Non-smokers Get Lung Cancer?

Don’t Underestimate the Risk: The Truth About Sudden Cardiac Arrest in Young People

Life after One Year Coronary Artery Bypass Graft (CABG) Surgery: A Journey of Recovery and Renewed Health.

vertex presentation is normal

Sign up for our free Health Library Daily Newsletter

Get doctor-approved health tips, news, and more.

PCOD (Polycystic Ovarian Disease) & PCOS : Causes, Symptoms, Diagnosis, Diet & Treatment

Diet and Nutrition for Kidney Patients

PCOD Diet: What Foods to Eat and Avoid

  • Health A-Z 974
  • Cardiology 185
  • COVID19-FAQ 179
  • Kids Health 165
  • General Health 142
  • Healthy Living 135
  • Living Healthy 130
  • COVID-19 119

Doctors by Specialities

  • Cardiologist
  • Dermatologist
  • Diabetologist
  • Endocrinologist
  • ENT Specialist
  • Gastroenterologist
  • General Physician
  • General Surgeon
  • Gynecologist
  • Hepatologist
  • Nephrologist
  • Neurologist
  • Neurosurgeon
  • Opthalmologist
  • Orthopedician
  • Pediatrician
  • Psychiatrist
  • Pulmonologist
  • Rheumatologist

Organization Accredited by Joint Commission International

AskApollo online Health Information Library is an initiative by Apollo Hospitals for general people, patients, their families and friends who seek useful health information, tips and advice on disease, procedure and certain medications to help you take care of yourself and your loved ones. The objective of this health library is to engage our community and offer relevant, trusted and easy to understand health & wellness information that can be accessed anywhere, anytime, on any device for FREE.

Copyrights - 2020. Apollo Hospitals Enterprise Limited. All Rights Reserved

  • Privacy Policy
  • Terms & Conditions

vertex presentation is normal

  • Mammary Glands
  • Fallopian Tubes
  • Supporting Ligaments
  • Reproductive System
  • Gametogenesis
  • Placental Development
  • Maternal Adaptations
  • Menstrual Cycle
  • Antenatal Care
  • Small for Gestational Age
  • Large for Gestational Age
  • RBC Isoimmunisation
  • Prematurity
  • Prolonged Pregnancy
  • Multiple Pregnancy
  • Miscarriage
  • Recurrent Miscarriage
  • Ectopic Pregnancy
  • Hyperemesis Gravidarum
  • Gestational Trophoblastic Disease
  • Breech Presentation
  • Abnormal lie, Malpresentation and Malposition
  • Oligohydramnios
  • Polyhydramnios
  • Placenta Praevia
  • Placental Abruption
  • Pre-Eclampsia
  • Gestational Diabetes
  • Headaches in Pregnancy
  • Haematological
  • Obstetric Cholestasis
  • Thyroid Disease in Pregnancy
  • Epilepsy in Pregnancy
  • Induction of Labour
  • Operative Vaginal Delivery
  • Prelabour Rupture of Membranes
  • Caesarean Section
  • Shoulder Dystocia
  • Cord Prolapse
  • Uterine Rupture
  • Amniotic Fluid Embolism
  • Primary PPH
  • Secondary PPH
  • Psychiatric Disease
  • Postpartum Contraception
  • Breastfeeding Problems
  • Primary Dysmenorrhoea
  • Amenorrhoea and Oligomenorrhoea
  • Heavy Menstrual Bleeding
  • Endometriosis
  • Endometrial Cancer
  • Adenomyosis
  • Cervical Polyps
  • Cervical Ectropion
  • Cervical Intraepithelial Neoplasia + Cervical Screening
  • Cervical Cancer
  • Polycystic Ovary Syndrome (PCOS)
  • Ovarian Cysts & Tumours
  • Urinary Incontinence
  • Genitourinary Prolapses
  • Bartholin's Cyst
  • Lichen Sclerosus
  • Vulval Carcinoma
  • Introduction to Infertility
  • Female Factor Infertility
  • Male Factor Infertility
  • Female Genital Mutilation
  • Barrier Contraception
  • Combined Hormonal
  • Progesterone Only Hormonal
  • Intrauterine System & Device
  • Emergency Contraception
  • Pelvic Inflammatory Disease
  • Genital Warts
  • Genital Herpes
  • Trichomonas Vaginalis
  • Bacterial Vaginosis
  • Vulvovaginal Candidiasis
  • Obstetric History
  • Gynaecological History
  • Sexual History
  • Obstetric Examination
  • Speculum Examination
  • Bimanual Examination
  • Amniocentesis
  • Chorionic Villus Sampling
  • Hysterectomy
  • Endometrial Ablation
  • Tension-Free Vaginal Tape
  • Contraceptive Implant
  • Fitting an IUS or IUD

Abnormal Fetal lie, Malpresentation and Malposition

Original Author(s): Anna Mcclune Last updated: 1st December 2018 Revisions: 12

  • 1 Definitions
  • 2 Risk Factors
  • 3.2 Presentation
  • 3.3 Position
  • 4 Investigations
  • 5.1 Abnormal Fetal Lie
  • 5.2 Malpresentation
  • 5.3 Malposition

The lie, presentation and position of a fetus are important during labour and delivery.

In this article, we will look at the risk factors, examination and management of abnormal fetal lie, malpresentation and malposition.

Definitions

  • Longitudinal, transverse or oblique
  • Cephalic vertex presentation is the most common and is considered the safest
  • Other presentations include breech, shoulder, face and brow
  • Usually the fetal head engages in the occipito-anterior position (the fetal occiput facing anteriorly) – this is ideal for birth
  • Other positions include occipito-posterior and occipito-transverse.

Note: Breech presentation is the most common malpresentation, and is covered in detail here .

vertex presentation is normal

Fig 1 – The two most common fetal presentations: cephalic and breech.

Risk Factors

The risk factors for abnormal fetal lie, malpresentation and malposition include:

  • Multiple pregnancy
  • Uterine abnormalities (e.g fibroids, partial septate uterus)
  • Fetal abnormalities
  • Placenta praevia
  • Primiparity

Identifying Fetal Lie, Presentation and Position

The fetal lie and presentation can usually be identified via abdominal examination. The fetal position is ascertained by vaginal examination.

For more information on the obstetric examination, see here .

  • Face the patient’s head
  • Place your hands on either side of the uterus and gently apply pressure; one side will feel fuller and firmer – this is the back, and fetal limbs may feel ‘knobbly’ on the opposite side

Presentation

  • Palpate the lower uterus (above the symphysis pubis) with the fingers of both hands; the head feels hard and round (cephalic) and the bottom feels soft and triangular (breech)
  • You may be able to gently push the fetal head from side to side

The fetal lie and presentation may not be possible to identify if the mother has a high BMI, if she has not emptied her bladder, if the fetus is small or if there is polyhydramnios .

During labour, vaginal examination is used to assess the position of the fetal head (in a cephalic vertex presentation). The landmarks of the fetal head, including the anterior and posterior fontanelles, indicate the position.

vertex presentation is normal

Fig 2 – Assessing fetal lie and presentation.

Investigations

Any suspected abnormal fetal lie or malpresentation should be confirmed by an ultrasound scan . This could also demonstrate predisposing uterine or fetal abnormalities.

Abnormal Fetal Lie

If the fetal lie is abnormal, an external cephalic version (ECV) can be attempted – ideally between 36 and 38 weeks gestation.

ECV is the manipulation of the fetus to a cephalic presentation through the maternal abdomen.

It has an approximate success rate of 50% in primiparous women and 60% in multiparous women. Only 8% of breech presentations will spontaneously revert to cephalic in primiparous women over 36 weeks gestation.

Complications of ECV are rare but include fetal distress , premature rupture of membranes, antepartum haemorrhage (APH) and placental abruption. The risk of an emergency caesarean section (C-section) within 24 hours is around 1 in 200.

ECV is contraindicated in women with a recent APH, ruptured membranes, uterine abnormalities or a previous C-section .

vertex presentation is normal

Fig 3 – External cephalic version.

Malpresentation

The management of malpresentation is dependent on the presentation.

  • Breech – attempt ECV before labour, vaginal breech delivery or C-section
  • Brow – a C-section is necessary
  • If the chin is anterior (mento-anterior) a normal labour is possible; however, it is likely to be prolonged and there is an increased risk of a C-section being required
  • If the chin is posterior (mento-posterior) then a C-section is necessary
  • Shoulder – a C-section is necessary

Malposition

90% of malpositions spontaneously rotate to occipito-anterior as labour progresses. If the fetal head does not rotate, rotation and operative vaginal delivery can be attempted. Alternatively a C-section can be performed.

  • Usually the fetal head engages in the occipito-anterior position (the fetal occiput facing anteriorly) - this is ideal for birth

If the fetal lie is abnormal, an external cephalic version (ECV) can be attempted - ideally between 36 and 38 weeks gestation.

  • Breech - attempt ECV before labour, vaginal breech delivery or C-section

Found an error? Is our article missing some key information? Make the changes yourself here!

Once you've finished editing, click 'Submit for Review', and your changes will be reviewed by our team before publishing on the site.

We use cookies to improve your experience on our site and to show you relevant advertising. To find out more, read our privacy policy .

Privacy Overview

vertex presentation is normal

Labour and Delivery Care Module: 8. Abnormal Presentations and Multiple Pregnancies

Study session 8  abnormal presentations and multiple pregnancies, introduction.

In previous study sessions of this module, you have been introduced to the definitions, signs, symptoms and stages of normal labour, and about the ‘normal’ vertex presentation of the fetus during delivery. In this study session, you will learn about the most common abnormal presentations (breech, shoulder, face or brow), their diagnostic criteria and the required actions you need to take to prevent complications developing during labour. Taking prompt action may save the life of the mother and her baby if the delivery becomes obstructed because the baby is in an abnormal presentation. We will also tell you about twin births and the complications that may result if the two babies become ‘locked’ together, preventing either of them from being born.

Learning Outcomes for Study Session 8

After studying this session, you should be able to:

8.1  Define and use correctly all of the key words printed in bold . (SAQs 8.1 and 8.2)

8.2  Describe how you would identify a fetus in the vertex presentation and distinguish this from common malpresentations and malpositions. (SAQs 8.1 and 8.2)

8.3  Describe the causes and complications for the fetus and the mother of fetal malpresentation during full term labour. (SAQ 8.3)

8.4  Describe how you would identify a multiple pregnancy and the complications that may arise. (SAQ 8.4)

8.5  Explain when and how you would refer a woman in labour due to abnormal fetal presentation or multiple pregnancy. (SAQ 8.4)

8.1  Normal and abnormal presentations

8.1.1  vertex presentation.

In about 95% of deliveries, the part of the fetus which arrives first at the mother’s pelvic brim is the highest part of the fetal head, which is called the vertex (Figure 8.1). This presentation is called the vertex presentation . Notice that the baby’s chin is tucked down towards its chest, so that the vertex is the leading part entering the mother’s pelvis. The baby’s head is said to be ‘well-flexed’ in this position.

A baby in the well-flexed vertex presentation before birth, relative to the mother’s pelvis

During early pregnancy, the baby is the other way up — with its bottom pointing down towards the mother’s cervix — which is called the breech presentation . This is because during its early development, the head of the fetus is bigger than its buttocks; so in the majority of cases, the head occupies the widest cavity, i.e. the fundus (rounded top) of the uterus. As the fetus grows larger, the buttocks become bigger than the head and the baby spontaneously reverses its position, so its buttocks occupy the fundus. In short, in early pregnancy, the majority of fetuses are in the breech presentation and later in pregnancy most of them make a spontaneous transition to the vertex presentation.

8.1.2  Malpresentations

You will learn about obstructed labour in Study Session 9.

When the baby presents itself in the mother’s pelvis in any position other than the vertex presentation, this is termed an abnormal presentation, or m alpresentation . The reason for referring to this as ‘abnormal’ is because it is associated with a much higher risk of obstruction and other birth complications than the vertex presentation. The most common types of malpresentation are termed breech, shoulder, face or brow. We will discuss each of these in turn later. Notice that the baby can be ‘head-down’ but in an abnormal presentation, as in face or brow presentations, when the baby’s face or forehead (brow) is the presenting part.

8.1.3  Malposition

Although it may not be so easy for you to identify this, the baby can also be in an abnormal position even when it is in the vertex presentation. In a normal delivery, when the baby’s head has engaged in the mother’s pelvis, the back of the baby’s skull (the occiput ) points towards the front of the mother’s pelvis (the pubic symphysis ), where the two pubic bones are fused together. This orientation of the fetal skull is called the occipito-anterior position (Figure 8.2a). If the occiput (back) of the fetal skull is towards the mother’s back, this occipito-posterior position (Figure 8.2b) is a vertex malposition , because it is more difficult for the baby to be born in this orientation. The good thing is that more than 90% of babies in vertex malpositions undergo rotation to the occipito-anterior position and are delivered normally.

You learned the directional positions: anterior/in front of and posterior/behind or in the back of, in the Antenatal Care Module, Part 1, Study Session 3.

Note that the fetal skull can also be tilted to the left or to the right in either the occipito-anterior or occipito-posterior positions.

Possible positions of the fetal skull when the baby is in the vertex presentation and the mother is lying on her back:

8.2  Causes and consequences of malpresentations and malpositions

In the majority of individual cases it may not be possible to identify what caused the baby to be in an abnormal presentation or position during delivery. However, the general conditions that are thought to increase the risk of malpresentation or malposition are listed below:

Multiple pregnancy is the subject of Section 8.7 of this study session. You learned about placenta previa in the Antenatal Care Module, Study Session 21.

  • Abnormally increased or decreased amount of amniotic fluid
  • A tumour (abnormal tissue growth) in the uterus preventing the spontaneous inversion of the fetus from breech to vertex presentation during late pregnancy
  • Abnormal shape of the pelvis
  • Laxity (slackness) of muscular layer in the walls of the uterus
  • Multiple pregnancy (more than one baby in the uterus)
  • Placenta previa (placenta partly or completely covering the cervical opening).

If the baby presents at the dilating cervix in an abnormal presentation or malposition, it will more difficult (and may be impossible) for it to complete the seven cardinal movements that you learned about in Study Sessions 3 and 5. As a result, birth is more difficult and there is an increased risk of complications, including:

You learned about PROM in Study Session 17 of the Antenatal Care Module, Part 2.

  • Premature rupture of the fetal membranes (PROM)
  • Premature labour
  • Slow, erratic, short-lived contractions
  • Uncoordinated and extremely painful contractions, with slow or no progress of labour
  • Prolonged and obstructed labour, leading to a ruptured uterus (see Study Sessions 9 and 10 of this Module)
  • Postpartum haemorrhage (see Study Session 11)
  • Fetal and maternal distress, which may lead to the death of the baby and/or the mother.

With these complications in mind, we now turn your attention to the commonest types of malpresentation and how to recognise them.

8.3  Breech presentation

In a b reech presentation , the fetus lies with its buttocks in the lower part of the uterus, and its buttocks and/or the feet are the presenting parts during delivery. Breech presentation occurs on average in 3–4% of deliveries after 34 weeks of pregnancy.

When is the breech position the normal position for the fetus?

During early pregnancy the baby’s bottom points down towards the mother’s cervix, and its head (the largest part of the fetus at this stage of development) occupies the fundus (rounded top) of the uterus, which is the widest part of the uterine cavity.

8.3.1  Causes of breech presentation

You can see a transverse lie in Figure 8.7 later in this study session.

In the majority of cases there is no obvious reason why the fetus should present by the breech at full term. In practice, what is commonly observed is the association of breech presentation at delivery with a transverse lie earlier in the pregnancy, i.e. the fetus lies sideways across the mother’s abdomen, facing a sideways implanted placenta. It is thought that when the placenta is in front of the baby’s face, it may obstruct the normal process of inversion, when the baby turns head-down as it gets bigger during the pregnancy. As a result, the fetus turns in the other direction and ends in the breech presentation. Some other circumstances that are thought to favour a breech presentation during labour include:

  • Premature labour, beginning before the baby undergoes spontanous inversion from breech to vertex presentation
  • Multiple pregnancy, preventing the normal inversion of one or both babies
  • Polyhydramnios: excessive amount of amniotic fluid, which makes it more difficult for the fetal head to ‘engage’ with the mother’s cervix (polyhydramnios is pronounced ‘poll-ee-hy-dram-nee-oss’. Hydrocephaly is pronounced ‘hy-droh-keff-all-ee’)
  • Hydrocephaly (‘water on the brain’) i.e. an abnormally large fetal head due to excessive accumulation of fluid around the brain
  • Placenta praevia
  • Breech delivery in the previous pregnancy
  • Abnormal formation of the uterus.

8.3.2  Diagnosis of breech presentation

On abdominal palpation the fetal head is found above the mother’s umbilicus as a hard, smooth, rounded mass, which gently ‘ballots’ (can be rocked) between your hands.

Why do you think a mass that ‘ballots’ high up in the abdomen is a sign of breech presentation? (You learned about this in Study Session 11 of the Antenatal Care Module.)

The baby’s head can ‘rock’ a little bit because of the flexibility of the baby’s neck, so if there is a rounded, ballotable mass above the mother’s umbilicus it is very likely to be the baby’s head. If the baby was ‘bottom-up’ (vertex presentation) the whole of its back will move of you try to rock the fetal parts at the fundus (Figure 8.3).

(a) The whole back of a baby in the vertex position will move if you rock it at the fundus; (b) The head can be ‘rocked’ and the back stays still in a breech presentation.

Once the fetus has engaged and labour has begun, the breech baby’s buttocks can be felt as soft and irregular on vaginal examination. They feel very different to the relatively hard rounded mass of the fetal skull in a vertex presentation. When the fetal membranes rupture, the buttocks and/or feet can be felt more clearly. The baby’s anus may be felt and fresh thick, dark meconium may be seen on your examining finger. If the baby’s legs are extended, you may be able to feel the external genitalia and even tell the sex of the baby before it is born.

8.3.3  Types of breech presentation

There are three types of breech presentation, as illustrated in Figure 8.4. They are:

  • Complete breech is characterised by flexion of the legs at both hips and knee joints, so the legs are bent underneath the baby.
  • Frank breech is the commonest type of breech presentation, and is characterised by flexion at the hip joints and extension at the knee joints, so both the baby’s legs point straight upwards.
  • Footling breech is when one or both legs are extended at the hip and knee joint and the baby presents ‘foot first’.

Figure 8.4  Different types of breech presentation.

8.3.4  Risks of breech presentation

Important!

Regardless of the type of breech presentation, there are significant associated risks to the baby. They include:

  • The fetal head gets stuck (arrested) before delivery
  • Labour becomes obstructed when the fetus is disproportionately large for the size of the maternal pelvis
  • Cord prolapse may occur, i.e. the umbilical cord is pushed out ahead of the baby and may get compressed against the wall of the cervix or vagina
  • Premature separation of the placenta (placental abruption)
  • Birth injury to the baby, e.g. fracture of the arms or legs, nerve damage, trauma to the internal organs, spinal cord damage, etc.

A breech birth may also result in trauma to the mother’s birth canal or external genitalia through being overstretched by the poorly fitting fetal parts.

Cord prolapse in a normal (vertex) presentation was illustrated in Study Session 17 of the Antenatal Care Module, and placental abruption was covered in Study Session 21.

What will be the effect on the baby if it gets stuck, the labour is obstructed, the cord prolapses, or placental abruption occurs?

The result will be hypoxia , i.e. it will be deprived of oxygen, and may suffer permanent brain damage or die.

You learned about the causes and consequences of hypoxia in the Antenatal Care Module.

8.4  Face presentation

Face presentation occurs when the baby’s neck is so completely extended (bent backwards) that the occiput at the back of the fetal skull touches the baby’s own spine (see Figure 8.5). In this position, the baby’s face will present to you during delivery.

5  Face presentation. (a) The baby’s chin is facing towards the front of the mother’s pelvis; (b) the chin is facing towards the mother’s backbone.

Refer the mother if a baby in the chin posterior face presentation does not rotate and the labour is prolonged.

The incidence of face presentation is about 1 in 500 pregnancies in full term labours. In Figure 8.5, you can see how flexed the head is at the neck. Babies who present in the ‘chin posterior’ position (on the right in Figure 8.5) usually rotate spontaneously during labour, and assume the ‘chin anterior’ position, which makes it easier for them to be born. However, they are unlikely to be delivered vaginally if they fail to undergo spontaneous rotation to the chin anterior position, because the baby’s chin usually gets stuck against the mother’s sacrum (the bony prominence at the back of her pelvis). A baby in this position will have to be delivered by caesarean surgery.

8.4.1  Causes of face presentation

The causes of face presentation are similar to those already described for breech births:

  • Laxity (slackness) of the uterus after many previous full-term pregnancies
  • Multiple pregnancy
  • Polyhydramnios (excessive amniotic fluid)
  • Congenital abnormality of the fetus (e.g. anencephaly, which means no or incomplete skull bones)
  • Abnormal shape of the mother’s pelvis.

8.4.2  Diagnosis of face presentation

Face presentation may not be easily detected by abdominal palpation, especially if the chin is in the posterior position. On abdominal examination, you may feel irregular shapes, formed because the fetal spine is curved in an ‘S’ shape. However, on vaginal examination, you can detect face presentation because:

  • The presenting part will be high, soft and irregular.
  • When the cervix is sufficiently dilated, you may be able to feel parts of the face, such as the orbital ridges above the eyes, the nose or mouth, gums, or bony chin.
  • If the membranes are ruptured, the baby may suck your examining finger!

But as labour progresses, the baby’s face becomes o edematous (swollen with fluid), making it more difficult to distinguish from the soft shape you will feel in a breech presentation.

8.4.3  Complications of face presentation

Complications for the fetus include:

  • Obstructed labour and ruptured uterus
  • Cord prolapse
  • Facial bruising
  • Cerebral haemorrhage (bleeding inside the fetal skull).

8.5  Brow presentation

Brow presentation.

In brow presentation , the baby’s head is only partially extended at the neck (compare this with face presentation), so its brow (forehead) is the presenting part (Figure 8.6). This presentation is rare, with an incidence of 1 in 1000 deliveries at full term.

8.5.1  Possible causes of brow presentation

You have seen all of these factors before, as causes of other malpresentations:

  • Lax uterus due to repeated full term pregnancy
  • Polyhydramnios

8.5.2  Diagnosis of brow presentation

Brow presentation is not usually detected before the onset of labour, except by very experienced birth attendants. On abdominal examination, the head is high in the mother’s abdomen, appears unduly large and does not descend into the pelvis, despite good uterine contractions. On vaginal examination, the presenting part is high and may be difficult to reach. You may be able to feel the root of the nose, eyes, but not the mouth, tip of the nose or chin. You may also feel the anterior fontanel, but a large caput (swelling) towards the front of the fetal skull may mask this landmark if the woman has been in labour for some hours.

Recall the appearance of a normal caput over the posterior fontanel shown in Figure 4.4 earlier in this Module.

8.5.3  Complications of brow presentation

The complications of brow presentation are much the same as for other malpresentations:

  • Cerebral haemorrhage.

Which are you more likely to encounter — face or brow presentations?

Face presentation, which occurs in 1 in 500 full term labours. Brow presentation is more rare, at 1 in 1,000 full term labours.

8.6  Shoulder presentation

Shoulder presentation is rare at full term, but may occur when the fetus lies transversely across the uterus (Figure 8.7), if it stopped part-way through spontaneous inversion from breech to vertex, or it may lie transversely from early pregnancy. If the baby lies facing upwards, its back may be the presenting part; if facing downwards its hand may emerge through the cervix. A baby in the transverse position cannot be born through the vagina and the labour will be obstructed. Refer babies in shoulder presentation urgently.

Transverse lie (shoulder presentation).

8.6.1  Causes of shoulder presentation

Causes of shoulder presentation could be maternal or fetal factors.

Maternal factors include:

  • Lax abdominal and uterine muscles: most often after several previous pregnancies
  • Uterine abnormality
  • Contracted (abnormally narrow) pelvis.

Fetal factors include:

  • Preterm labour
  • Placenta previa.

What do ‘placenta previa’ and ‘polyhydramnios’ indicate?

Placenta previa is when the placenta is partly or completely covering the cervical opening. Polyhydramnios is an excess of amniotic fluid. They are both potential causes of malpresentation.

8.6.2  Diagnosis of shoulder presentation

On abdominal palpation, the uterus appears broader and the height of the fundus is less than expected for the period of gestation, because the fundus is not occupied by either the baby’s head or buttocks. You can usually feel the head on one side of the mother’s abdomen. On vaginal examination, in early labour, the presenting part may not be felt, but when the labour is well progressed, you may feel the baby’s ribs. When the shoulder enters the pelvic brim, the baby’s arm may prolapse and become visible outside the vagina.

8.6.3  Complications of shoulder presentation

Complications include:

  • Trauma to a prolapsed arm
  • Fetal hypoxia and death.

Remember that a shoulder presentation means the baby cannot be born through the vagina; if you detect it in a woman who is already in labour, refer her urgently to a higher health facility.

8.7  Multiple pregnancy

In this section, we turn to the subject of multiple pregnancy , when there is more than one fetus in the uterus. More than 95% of multiple pregnancies are twins (two fetuses), but there can also be triplets (three fetuses), quadruplets (four fetuses), quintuplets (five fetuses), and other higher order multiples with a declining chance of occurrence. The spontaneous occurrence of twins varies by country : it is lowest in East Asia n countries like Japan and China (1 out of 1000 pregnancies are fraternal or non-identical twins), and highest in black Africans , particularly in Nigeria , where 1 in 20 pr egnancies are fraternal twins. In general, compared to single babies, multiple pregnancies are highly associated with early pregnancy loss and high perinatal mortality, mainly due to prematurity.

8.7.1  Types of twin pregnancy

Twins may be identical (monozygotic) or non-identical and fraternal (dizigotic). Monozygotic twins develop from a single fertilised ovum (the zygote), so they are always the same sex and they share the same placenta . By contrast, dizygotic twins develop from two different zygotes, so they can have the same or different sex, and they have separate placenta s . Figure 8.8 shows the types of twin pregnancy and the processes by which they are formed.

Types of twin pregnancy: (a) Fraternal or non-identical twins usually each have a placenta of their own, although they can fuse if the two placentas lie very close together. (b) Identical twins always share the same placenta, but usually they have their own fetal membranes.

8.7.2  Diagnosis of twin pregnancy

On abdominal examination you may notice that:

  • The size of the uterus is larger than the expected for the period for gestation.
  • The uterus looks round and broad, and fetal movement may be seen over a large area. (The shape of the uterus at term in a singleton pregnancy in the vertex presentation appears heart-shaped rounder at the top and narrower at the bottom.)
  • Two heads can be felt.
  • Two fetal heart beats may be heard if two people listen at the same time, and they can detect at least 10 beats different (Figure 8.6).
  • Ultrasound examination can make an absolute diagnosis of twin pregnancy.

Two people listen either side of the pregnant woman. Each taps in rhythm with the heartbeat they can hear. The pregnant woman says that their tapping is different and maybe she is having twins.

8.7.3  Consequences of twin pregnancy

Women who are pregnant with twins are more prone to suffer with the minor disorders of pregnancy, like morning sickness, nausea and heartburn. Twin pregnancy is one cause of hyperemesis gravidarum (persistent, severe nausea and vomiting). Mothers of twins are also more at risk of developing iron and folate-deficiency anaemia during pregnancy.

Can you suggest why anaemia is a greater risk in multiple pregnancies?

The mother has to supply the nutrients to feed two (or more) babies; if she is not getting enough iron and folate in her diet, or through supplements, she will become anaemic.

Other complications include the following:

  • Pregnancy-related hypertensive disorders like pre-eclampsia and eclampsia are more common in twin pregnancies.
  • Pressure symptoms may occur in late pregnancy due to the increased weight and size of the uterus.
  • Labour often occurs spontaneously before term, with p remature delivery or premature rupture of membranes (PROM) .
  • Respiratory deficit ( shortness of breath, because of fast growing uterus) is another common problem.

Twin babies may be small in comparison to their gestational age and more prone to the complications associated with low birth weight (increased vulnerability to infection, losing heat, difficulty breastfeeding).

You will learn about low birth weight babies in detail in the Postnatal Care Module.

  • Malpresentation is more common in twin pregnancies, and they may also be ‘locked’ at the neck with one twin in the vertex presentation and the other in breech. The risks associated with malpresentations already described also apply: prolapsed cord, poor uterine contraction, prolonged or obstructed labour, postpartum haemorrhage, and fetal hypoxia and death.
  • Conjoined twins (fused twins, joined at the head, chest, or abdomen, or through the back) may also rarely occur.

8.8  Management of women with malpresentation or multiple pregnancy

As you have seen in this study session, any presentation other than vertex has its own dangers for the mother and baby. For this reason, all women who develop abnormal presentation or multiple pregnancy should ideally have skilled care by senior health professionals in a health facility where there is a comprehensive emergency obstetric service. Early detection and referral of a woman in any of these situations can save her life and that of her baby.

What can you do to reduce the risks arising from malpresentation or multiple pregnancy in women in your care?

During focused antenatal care of the pregnant women in your community, at every visit after 36 weeks of gestation you should check for the presence of abnormal fetal presentation. If you detect abnormal presentation or multiple pregnancy, you should refer the woman before the onset of labour.

Summary of Study Session 8

In Study Session 8, you learned that:

  • During early pregnancy, babies are naturally in the breech position, but in 95% of cases they spontaneously reverse into the vertex presentation before labour begins.
  • Malpresentation or malposition of the fetus at full term increases the risk of obstructed labour and other birth complications.
  • Common causes of malpresentations/malpositions include: excess amniotic fluid, abnormal shape and size of the pelvis; uterine tumour; placenta praevia; slackness of uterine muscles (after many previous pregnancies); or multiple pregnancy.
  • Common complications include: premature rupture of membranes, premature labour, prolonged/obstructed labour; ruptured uterus; postpartum haemorrhage; fetal and maternal distress which may lead to death.
  • Vertex malposition is when the fetal head is in the occipito-posterior position — i.e. the back of the fetal skull is towards the mother’s back instead of pointing towards the front of the mother’s pelvis. 90% of vertex malpositions rotate and deliver normally.
  • Breech presentation (complete, frank or footling) is when the baby’s buttocks present during labour. It occurs in 3–4% of labours after 34 weeks of pregnancy and may lead to obstructed labour, cord prolapse, hypoxia, premature separation of the placenta, birth injury to the baby or to the birth canal.
  • Face presentation is when the fetal head is bent so far backwards that the face presents during labour. It occurs in about 1 in 500 full term labours. ‘Chin posterior’ face presentations usually rotate spontaneously to the ‘chin anterior’ position and deliver normally. If rotation does not occur, a caesarean delivery is likely to be necessary.
  • Brow presentation is when the baby’s forehead is the presenting part. It occurs in about 1 in 1000 full term labours and is difficult to detect before the onset of labour. Caesarean delivery is likely to be necessary.
  • Shoulder presentation occurs when the fetal lie during labour is transverse. Once labour is well progressed, vaginal examination may feel the baby’s ribs, and an arm may sometimes prolapse. Caesarean delivery is always required unless a doctor or midwife can turn the baby head-down.
  • Multiple pregnancies are always at high risk of malpresentation. Mothers need greater antenatal care, and twins are more prone to complications associated with low birth weight and prematurity.
  • Any presentation other than vertex after 34 weeks of gestation is considered as high risk to the mother and to her baby. Do not attempt to turn a malpresenting or malpositioned baby! Refer the mother for emergency obstetric care.

Self-Assessment Questions (SAQs) for Study Session 8

Now that you have completed this study session, you can assess how well you have achieved its Learning Outcomes by answering the following questions. Write your answers in your Study Diary and discuss them with your Tutor at the next Study Support Meeting. You can check your answers with the Notes on the Self-Assessment Questions at the end of this Module.

SAQ 8.1 (tests Learning Outcomes 8.1, 8.2 and 8.4)

Which of the following definitions are true and which are false? Write down the correct definition for any which you think are false.

A  Fundus — the ‘rounded top’ and widest cavity of the uterus.

B  Complete breech — where the legs are bent at both hips and knee joints and are folded underneath the baby.

C  Frank breech — where the breech is so difficult to treat that you have to be very frank and open with the mother about the difficulties she will face in the birth.

D  Footling breech — when one or both legs are extended so that the baby presents ‘foot first’.

E  Hypoxia — the baby gets too much oxygen.

F  Multiple pregnancy — when a mother has had many babies previously.

G  Monozygotic twins — develop from a single fertilised ovum (the zygote). They can be different sexes but they share the same placenta.

H  Dizygotic twins — develop from two zygotes. They have separate placentas, and can be of the same sex or different sexes.

A is true.  The fundus is the ‘rounded top’ and widest cavity of the uterus.

B is true.  Complete breech is where the legs are bent at both hips and knee joints and are folded underneath the baby.

C is false . A frank breech is the most common type of breech presentation and is when the baby’s legs point straight upwards (see Figure 8.4).

D is true.   A footling breech is when one or both legs are extended so that the baby presents ‘foot first’.

E is false .  Hypoxia is when the baby is deprived of oxygen and risks permanent brain damage or death.

F is false.   Multiple pregnancy is when there is more than one fetus in the uterus.

G is false.   Monozygotic twins develop from a single fertilised ovum (the zygote), and they are always the same sex , as well as sharing the same placenta.

H is true.  Dizygotic twins develop from two zygotes, have separate placentas, and can be of the same or different sexes.

SAQ 8.2 (tests Learning Outcomes 8.1 and 8.2)

What are the main differences between normal and abnormal fetal presentations? Use the correct medical terms in bold in your explanation.

In a normal presentation, the vertex (the highest part of the fetal head) arrives first at the mother’s pelvic brim, with the occiput (the back of the baby’s skull) pointing towards the front of the mother’s pelvis (the pubic symphysis ).

Abnormal presentations are when there is either a vertex malposition (the occiput of the fetal skull points towards the mother’s back instead towards of the pubic symphysis), or a malpresentation (when anything other than the vertex is presenting): e.g. breech presentation (buttocks first); face presentation (face first); brow presentation (forehead first); and shoulder presentation (transverse fetal).

SAQ 8.3 (tests Learning Outcomes 8.3 and 8.5)

  • a. List the common complications of malpresentations or malposition of the fetus at full term.
  • b. What action should you take if you identify that the fetus is presenting abnormally and labour has not yet begun?
  • c. What should you not attempt to do?
  • a. The common complications of malpresentation or malposition of the fetus at full term include: premature rupture of membranes, premature labour, prolonged/obstructed labour; ruptured uterus; postpartum haemorrhage; fetal and maternal distress which may lead to death.
  • b. You should refer the mother to a higher health facility – she may need emergency obstetric care.
  • c. You should not attempt to turn the baby by hand. This should only be attempted by a specially trained doctor or midwife and should only be done at a health facility.

SAQ 8.4 (tests Learning Outcomes 8.4 and 8.5)

A pregnant woman moves into your village who is already at 37 weeks gestation. You haven’t seen her before. She tells you that she gave birth to twins three years ago and wants to know if she is having twins again this time.

  • a. How would you check this?
  • b. If you diagnose twins, what would you do to reduce the risks during labour and delivery?
  • Is the uterus larger than expected for the period of gestation?
  • What is its shape – is it round (indicative of twins) or heart-shaped (as in a singleton pregnancy)?
  • Can you feel more than one head?
  • Can you hear two fetal heartbeats (two people listening at the same time) with at least 10 beats difference?
  • If there is access to a higher health facility, and you are still not sure, try and get the woman to it for an ultrasound scan.
  • Be extra careful to check that the mother is not anaemic.
  • Encourage her to rest and put her feet up to reduce the risk of increased blood pressure or swelling in her legs and feet.
  • Be alert to the increased risk of pre-eclampsia.
  • Expect her to go into labour before term, and be ready to get her to the health facility before she goes into labour, going with her if at all possible.
  • Get in early touch with that health facility to warn them to expect a referral from you.
  • Make sure that transport is ready to take her to a health facility when needed.

Except for third party materials and/or otherwise stated (see terms and conditions ) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Sharealike 2.0 licence . In short this allows you to use the content throughout the world without payment for non-commercial purposes in accordance with the Creative Commons non commercial sharealike licence. Please read this licence in full along with OpenLearn terms and conditions before making use of the content.

When using the content you must attribute us (The Open University) (the OU) and any identified author in accordance with the terms of the Creative Commons Licence.

The Acknowledgements section is used to list, amongst other things, third party (Proprietary), licensed content which is not subject to Creative Commons licensing. Proprietary content must be used (retained) intact and in context to the content at all times. The Acknowledgements section is also used to bring to your attention any other Special Restrictions which may apply to the content. For example there may be times when the Creative Commons Non-Commercial Sharealike licence does not apply to any of the content even if owned by us (the OU). In these stances, unless stated otherwise, the content may be used for personal and non-commercial use. We have also identified as Proprietary other material included in the content which is not subject to Creative Commons Licence. These are: OU logos, trading names and may extend to certain photographic and video images and sound recordings and any other material as may be brought to your attention.

Unauthorised use of any of the content may constitute a breach of the terms and conditions and/or intellectual property laws.

We reserve the right to alter, amend or bring to an end any terms and conditions provided here without notice.

All rights falling outside the terms of the Creative Commons licence are retained or controlled by The Open University.

Head of Intellectual Property, The Open University

Fastest Obstetric, Gynecology and Pediatric Insight Engine

  • Abdominal Key
  • Anesthesia Key
  • Basicmedical Key
  • Otolaryngology & Ophthalmology
  • Musculoskeletal Key
  • Obstetric, Gynecology and Pediatric
  • Oncology & Hematology
  • Plastic Surgery & Dermatology
  • Clinical Dentistry
  • Radiology Key
  • Thoracic Key
  • Veterinary Medicine
  • Gold Membership

Malpresentations

Fetal malpresentation exists when the presenting part is other than the normal vertex of the fetal head. This includes two malpresentations that are covered in other chapters: breech ( Chapter 16 ) and cord presentation ( Chapter 18 ). The remaining malpresentations that will be covered in this chapter are face, brow, transverse lie with shoulder or arm presentation, and compound presentations. In modern obstetrics, particularly in the developed world, the incidence of mal­presentations has fallen. This is due to the association of many malpresentations with high parity and the fact that women are having fewer children. The various anteroposterior diameters ( Fig 11-1 ) of the term fetal head vary depending upon the position: normal flexed vertex (9.5 cm), deflexed occipito-posterior position (11–12 cm) and malpresentation: face presentation, submento-bregmatic (9.5 cm) and brow, mento-vertical (13.5 cm). These are illustrated in Figure 11-2 . FIGURE 11-1 Diameters and landmarks of the fetal skull. FIGURE 11-2 Positions and malpresentations of the fetal head. Face Presentation In face presentation the attitude of the fetal head is one of complete extension with the chin as the denominator and leading pole. The presenting diameter is the submento-bregmatic, which in the term fetus is about 9.5 cm. This is the same as the favourable flexed vertex presentation, but the facial bones do not mould to the same extent as the cranial vault does in vertex presentation. The incidence of face presentation is about 1 in 500 births. Causes • Fetal anomalies are found in about 15% of face presentations. The commonest are major CNS anomalies such as anencephaly and meningomyelocoele. Tumours of the neck may also cause extension and face presentation. • Prematurity. • Mild cephalopelvic disproportion has been incriminated. It is probable that in some cases of deflexed occipito-posterior position with relative disproportion the fetal head may extend completely to a face presentation. • It has been postulated that excessive tone in the extensor muscles may predispose to face presentation. This theory has been used to explain cases of primary face presentation which occur before the onset of labour. The development of face presentation during labour is called secondary face presentation. • High parity is associated in the majority of cases. • In most cases, other than parity, no obvious cause is found. Diagnosis The presenting part of the face is between the chin and supraorbital ridges. Usually the characteristic landmarks of the eyes, nose, mouth and chin can be felt with the examining finger during labour. Considerable oedema often develops which may, to a degree, obscure these landmarks. Although the distinction is usually obvious there may be confusion in distinguishing between the mouth and the anus. If this is so, the finger is inserted into the orifice and the gum ridges can easily be felt as a distinguishing landmark. Diagnosis before labour is rare but may be suspected if on abdominal examination the fetus is easily palpated and its back is lying dorsoanterior. In cases with a normally flexed vertex, palpation of the back and head will reveal only a slight depression at the neck between the back and occiput. In face presentations on the other hand, with the head extended, there is a marked depression between the back and occiput. If there is clinical suspicion, ultrasound will establish or refute the diagnosis. The position of a face presentation is defined with the chin as the denominator and is therefore recorded as mento-anterior, mento-posterior or mento-transverse, left or right accordingly. The majority of cases are mento-anterior. Management On the rare occasions that face presentation is diagnosed before labour a careful ultrasound examination should be made to exclude structural fetal anomalies. One can make the case for observation until the onset of labour or full term, on the grounds that a number of these cases will revert spontaneously to a normal flexed vertex position. However, if face presentation persists and the fetus is normal, it should be delivered by elective caesarean section. When the diagnosis is made in labour a gross fetal anomaly should be excluded and clinical pelvimetry should rule out obvious pelvic contraction or deformity. The position of the face presentation is then assessed. Depending upon the estimated fetal weight, the position, station, clinical assessment of pelvic capacity and the progress of labour the following guidelines may be used: If the fetus has an anomaly incompatible with life then progress to vaginal delivery should be followed. If the position is mento-anterior, which presents the same diameters as a flexed vertex, if the fetus is normal or small in size and the pelvis is of good capacity, progress can be followed with the expectation of spontaneous vaginal delivery. The majority of cases with mento-transverse position will rotate to the more favourable anterior position. Fifty years ago, when the morbidity and mortality associated with caesarean section was high, vaginal manipulation was used to try and convert face presentations to a vertex presentation. This was carried out at advanced or full cervical dilatation and usually done under deep general anaesthesia with uterine relaxation. In a previous edition of this book Chassar Moir (1964) described his technique: ‘In cases discovered early in labour (mentolateral) positions, I succeeded in five consecutive cases in correcting the position to a vertex position by the simple intrauterine manipulation of hooking down the occiput with the fingers and simultaneously pressing up the chin and brow with the thumb, labour then proceeded normally in each case.’ Nowadays, we would not advise such manipulation, except perhaps a tentative attempt which is most likely to succeed with a small fetus and a large pelvis. One would only continue with such a manoeuvre if it proved easy and atraumatic. ‘When the chin is turned towards the pubis, at the lower part of that bone, the woman must be laid on her back, the forceps introduced … and when the chin is brought out from under the pubis, the head must be pulled half round upwards; by which means, the fore and hind head will be raised from the perineum.’ William Smellie A Treatise on the Theory and Practice of Midwifery. London: D. Wilson, 1752, p281 Provided labour continues normally and there is good progress in the second stage with mento-anterior positions, spontaneous delivery is likely. If progress is inadequate with mento-anterior positions consideration of forceps delivery is appropriate. One has to be very careful that there is adequate descent for safe forceps assisted delivery. Even when the face is visible at the vulva the cranium may not be fully through the pelvic brim. The guiding dictum is ‘the head is higher than you think’. If forceps delivery is to be considered there should be no head palpable at the pelvic brim and the sacral hollow should be filled with the cranium. Either classical or Kielland’s forceps can be used and in face presentations the chin replaces the occiput for orientation. If Kielland’s forceps are used the directional buttons on the shanks should point toward the chin. With both types of forceps the blades are applied as for classical forceps to the occiput anterior positions (see Chapter 10 ). The orientation is along the mento-occipital diameter of the head. With the pelvic curve of the classical forceps the chin is between the heels of the blades and the face is beneath the level of the shanks ( Fig 11-3 ). With Kielland’s forceps the upper part of the blades is at the level of the supraorbital ridges with the face above the level of the shanks ( Fig 11-4 ).

Share this:

  • Click to share on Twitter (Opens in new window)
  • Click to share on Facebook (Opens in new window)

Related posts:

  • Human Birth
  • Shoulder Dystocia
  • Antepartum Haemorrhage
  • Analgesia and Anaesthesia

vertex presentation is normal

Stay updated, free articles. Join our Telegram channel

Comments are closed for this page.

vertex presentation is normal

Full access? Get Clinical Tree

vertex presentation is normal

  • To save this word, you'll need to log in. Log In

vertex presentation

Medical Definition of vertex presentation

Dictionary entries near vertex presentation, cite this entry.

“Vertex presentation.” Merriam-Webster.com Medical Dictionary , Merriam-Webster, https://www.merriam-webster.com/medical/vertex%20presentation. Accessed 13 Apr. 2024.

Subscribe to America's largest dictionary and get thousands more definitions and advanced search—ad free!

Play Quordle: Guess all four words in a limited number of tries.  Each of your guesses must be a real 5-letter word.

Can you solve 4 words at once?

Word of the day.

See Definitions and Examples »

Get Word of the Day daily email!

Popular in Grammar & Usage

Your vs. you're: how to use them correctly, every letter is silent, sometimes: a-z list of examples, more commonly mispronounced words, how to use em dashes (—), en dashes (–) , and hyphens (-), absent letters that are heard anyway, popular in wordplay, the words of the week - apr. 12, 10 scrabble words without any vowels, 12 more bird names that sound like insults (and sometimes are), 8 uncommon words related to love, 9 superb owl words, games & quizzes.

Play Blossom: Solve today's spelling word game by finding as many words as you can using just 7 letters. Longer words score more points.

Google Cloud Next 2024: Everything announced so far

Google’s Cloud Next 2024 event takes place in Las Vegas through Thursday, and that means lots of new cloud-focused news on everything from Gemini, Google’s AI-powered chatbot , to AI to devops and security. Last year’s event was the first in-person Cloud Next since 2019, and Google took to the stage to show off its ongoing dedication to AI with its Duet AI for Gmail and many other debuts , including expansion of generative AI to its security product line and other enterprise-focused updates and debuts .

Don’t have time to watch the full archive of Google’s keynote event ? That’s OK; we’ve summed up the most important parts of the event below, with additional details from the TechCrunch team on the ground at the event. And Tuesday’s updates weren’t the only things Google made available to non-attendees — Wednesday’s developer-focused stream started at 10:30 a.m. PT .

Google Vids

Leveraging AI to help customers develop creative content is something Big Tech is looking for, and Tuesday, Google introduced its version. Google Vids, a new AI-fueled video creation tool , is the latest feature added to the Google Workspace.

Here’s how it works: Google claims users can make videos alongside other Workspace tools like Docs and Sheets. The editing, writing and production is all there. You also can collaborate with colleagues in real time within Google Vids. Read more

Gemini Code Assist

After reading about Google’s new Gemini Code Assist , an enterprise-focused AI code completion and assistance tool, you may be asking yourself if that sounds familiar. And you would be correct. TechCrunch Senior Editor Frederic Lardinois writes that “Google previously offered a similar service under the now-defunct Duet AI branding.” Then Gemini came along. Code Assist is a direct competitor to GitHub’s Copilot Enterprise. Here’s why

And to put Gemini Code Assist into context, Alex Wilhelm breaks down its competition with Copilot, and its potential risks and benefits to developers, in the latest TechCrunch Minute episode.

Google Workspace

vertex presentation is normal

Image Credits: Google

Among the new features are voice prompts to kick off the AI-based “Help me write” feature in Gmail while on the go . Another one for Gmail includes a way to instantly turn rough email drafts into a more polished email. Over on Sheets, you can send out a customizable alert when a certain field changes. Meanwhile, a new set of templates make starting a new spreadsheet easier. For the Doc lovers, there is support for tabs now. This is good because, according to the company, you can “organize information in a single document instead of linking to multiple documents or searching through Drive.” Of course, subscribers get the goodies first. Read more

Google also seems to have plans to monetize two of its new AI features for the Google Workspace productivity suite. This will look like $10/month/user add-on packages. One will be for the new AI meetings and messaging add-on that takes notes for you, provides meeting summaries and translates content into 69 languages. The other is for the introduced AI security package, which helps admins keep Google Workspace content more secure. Read more

In February, Google announced an image generator built into Gemini, Google’s AI-powered chatbot. The company pulled it shortly after it was found to be randomly injecting gender and racial diversity into prompts about people. This resulted in some offensive inaccuracies. While we waited for an eventual re-release, Google came out with the enhanced image-generating tool, Imagen 2 . This is inside its Vertex AI developer platform and has more of a focus on enterprise. Imagen 2 is now generally available and comes with some fun new capabilities, including inpainting and outpainting. There’s also what Google’s calling “text-to-live images” where you  can now create short, four-second videos from text prompts, along the lines of AI-powered clip generation tools like Runway ,  Pika  and  Irreverent Labs . Read more

Vertex AI Agent Builder

We can all use a little bit of help, right? Meet Google’s Vertex AI Agent Builder, a new tool to help companies build AI agents.

“Vertex AI Agent Builder allows people to very easily and quickly build conversational agents,” Google Cloud CEO Thomas Kurian said. “You can build and deploy production-ready, generative AI-powered conversational agents and instruct and guide them the same way that you do humans to improve the quality and correctness of answers from models.”

To do this, the company uses a process called “grounding,” where the answers are tied to something considered to be a reliable source. In this case, it’s relying on Google Search (which in reality could or could not be accurate). Read more

Gemini comes to databases

Google calls Gemini in Databases a collection of features that “simplify all aspects of the database journey.” In less jargony language, it’s a bundle of AI-powered, developer-focused tools for Google Cloud customers who are creating, monitoring and migrating app databases. Read more

Google renews its focus on data sovereignty

closed padlocks on a green background with the exception of one lock, in red, that's open, symbolizing badly handled data breaches

Image Credits: MirageC / Getty Images

Google has offered cloud sovereignties before, but now it is focused more on partnerships rather than building them out on their own. Read more

Security tools get some AI love

Data flowing through a cloud on a blue background.

Image Credits: Getty Images

Google jumps on board the productizing generative AI-powered security tool train with a number of new products and features aimed at large companies. Those include Threat Intelligence, which can analyze large portions of potentially malicious code. It also lets users perform natural language searches for ongoing threats or indicators of compromise. Another is Chronicle, Google’s cybersecurity telemetry offering for cloud customers to assist with cybersecurity investigations. The third is the enterprise cybersecurity and risk management suite Security Command Center. Read more

Nvidia’s Blackwell platform

One of the anticipated announcements is Nvidia’s next-generation Blackwell platform coming to Google Cloud in early 2025. Yes, that seems so far away. However, here is what to look forward to: support for the high-performance Nvidia HGX B200 for AI and HPC workloads and GB200 NBL72 for large language model (LLM) training. Oh, and we can reveal that the GB200 servers will be liquid-cooled. Read more

Chrome Enterprise Premium

Meanwhile, Google is expanding its Chrome Enterprise product suite with the launch of Chrome Enterprise Premium . What’s new here is that it mainly pertains mostly to security capabilities of the existing service, based on the insight that browsers are now the endpoints where most of the high-value work inside a company is done. Read more

Gemini 1.5 Pro

Google Gemini 1.5 Pro

Everyone can use a “half” every now and again, and Google obliges with Gemini 1.5 Pro. This, Kyle Wiggers writes, is “Google’s most capable generative AI model,” and is now available in public preview on Vertex AI, Google’s enterprise-focused AI development platform. Here’s what you get for that half: T he amount of context that it can process, which is from 128,000 tokens up to 1 million tokens, where “tokens” refers to subdivided bits of raw data (like the syllables “fan,” “tas” and “tic” in the word “fantastic”). Read more

Open source tools

Open source code on a computer screen highlighted by a magnifying glass.

At Google Cloud Next 2024, the company debuted a number of open source tools primarily aimed at supporting generative AI projects and infrastructure. One is Max Diffusion, which is a collection of reference implementations of various diffusion models that run on XLA, or Accelerated Linear Algebra, devices. Then there is JetStream, a new engine to run generative AI models. The third is MaxTest, a collection of text-generating AI models targeting TPUs and Nvidia GPUs in the cloud. Read more

vertex presentation is normal

We don’t know a lot about this one, however, here is what we do know : Google Cloud joins AWS and Azure in announcing its first custom-built Arm processor, dubbed Axion. Frederic Lardinois writes that “based on Arm’s Neoverse 2 designs, Google says its Axion instances offer 30% better performance than other Arm-based instances from competitors like AWS and Microsoft and up to 50% better performance and 60% better energy efficiency than comparable X86-based instances.” Read more

The entire Google Cloud Next keynote

If all of that isn’t enough of an AI and cloud update deluge, you can watch the entire event keynote via the embed below.

Google Cloud Next’s developer keynote

On Wednesday, Google held a separate keynote for developers . They offered a deeper dive into the ins and outs of a number of tools outlined during the Tuesday keynote, including Gemini Cloud Assist, using AI for product recommendations and chat agents, ending with a showcase from Hugging Face. You can check out the full keynote below.

IMAGES

  1. Vertex Presentation: Position, Birth & What It Means

    vertex presentation is normal

  2. types of presentation in labour

    vertex presentation is normal

  3. Normal and Abnormal Labor

    vertex presentation is normal

  4. Normal Labor

    vertex presentation is normal

  5. Normal Labor

    vertex presentation is normal

  6. Fetal Presentation

    vertex presentation is normal

VIDEO

  1. Baby ulta ha ya seedha| Delivery normal ya operation| Cephalic or Breech Presentation in Pregnancy

  2. Using Vertices

  3. Vertex or Fragment Shader?

  4. HLSL Vertex Displacement and Normal Mapping Demo

  5. 3ds Max

  6. Vertex Data Structure

COMMENTS

  1. Vertex Presentation: Position, Birth & What It Means

    The vertex presentation describes the orientation a fetus should be in for a safe vaginal delivery. It becomes important as you near your due date because it tells your pregnancy care provider how they may need to deliver your baby. Vertex means "crown of the head.". This means that the crown of the fetus's head is presenting towards the ...

  2. Fetal Presentation, Position, and Lie (Including Breech Presentation

    Up-and-down (with the baby's spine parallel to mother's spine, called longitudinal) is normal, but sometimes the lie is sideways (transverse) or at an angle (oblique). ... In occiput posterior position (sometimes called sunny-side up), the fetus is head first (vertex presentation) but is facing forward (toward the mother's pubic bone—that is ...

  3. Fetal Presentation, Position, and Lie (Including Breech Presentation

    Normal fetal lie is longitudinal, normal presentation is vertex, and occiput anterior is the most common position. Abnormal fetal lie, presentation, or position may occur with ... If breech presentation is detected, external cephalic version can sometimes move the fetus to vertex presentation before labor, usually at 37 or 38 weeks. This ...

  4. What Is Vertex Presentation?

    Vertex presentation is just medical speak for "baby's head-down in the birth canal and rearing to go!". About 97 percent of all deliveries are headfirst, or vertex—and rare is the OB who will try to deliver any other way. Other, less common presentations include breech (when baby's head is near your ribs) and transverse (which means ...

  5. Vertex Presentation: What It Means for You & Your Baby

    Is vertex presentation normal? Yes, the vertex position of the baby is the most appropriate and favourable position to achieve normal delivery. "About 95% of babies are in vertex presentation (head down) at 36 weeks, while 3-4% may lie in a ' breech position," says Dr. Anita. Breech presentation is a non vertex presentation. A baby is ...

  6. Delivery, Face and Brow Presentation

    The term presentation describes the leading part of the fetus or the anatomical structure closest to the maternal pelvic inlet during labor. The presentation can roughly be divided into the following classifications: cephalic, breech, shoulder, and compound. Cephalic presentation is the most common and can be further subclassified as vertex, sinciput, brow, face, and chin.

  7. Vertex Presentation: How does it affect your labor & delivery?

    Yes, vertex presentation or vertex position of baby and vertex delivery are very common, normal, safe, and the best for labor and delivery of the baby. There is probability of complications sometimes, but that is only subject to certain conditions that we discussed above. However, understand that any other baby position is also safe.

  8. What Is Vertex Position?

    When it comes to labor and delivery, the vertex position is the ideal position for a vaginal delivery, especially if the baby is in the occiput anterior position—where the back of the baby's head is toward the front of the pregnant person's pelvis, says Dr. DeNoble. " [This] is the best position for vaginal birth because it is associated with ...

  9. Breech Baby: Causes, Complications, Turning & Delivery

    This head-first position is called vertex presentation and is the safest position for birth. ... This is a form of breech presentation where your baby is positioned horizontally across your uterus instead of vertically. This would make their shoulder enter the vagina first. ... The uterus is not normal in shape or has abnormal growths such as ...

  10. Delivery, Face Presentation, and Brow Presentation ...

    Normal Vertex Presentation: In a typical delivery, the baby is positioned head-down, with the back of the head (occiput) leading the way through the birth canal. Engagement and Descent: Prior to delivery, the baby's head engages in the pelvis and gradually descends, preparing for birth.

  11. What Is the Vertex Position?

    3 min read. When you give birth, your baby usually comes out headfirst, also called the vertex position. In the weeks before you give birth, your baby will move to place their head above your ...

  12. Fetal presentation before birth

    Frank breech. When a baby's feet or buttocks are in place to come out first during birth, it's called a breech presentation. This happens in about 3% to 4% of babies close to the time of birth. The baby shown below is in a frank breech presentation. That's when the knees aren't bent, and the feet are close to the baby's head.

  13. Face and Brow Presentation

    In a brow presentation, the fetal head is midway between full flexion (vertex) and hyperextension (face) along a longitudinal axis. The presenting portion of the fetal head is between the orbital ridge and the anterior fontanel. The face and chin are not included. The frontal bones are the point of designation and can present (as with the ...

  14. If Your Baby Is Breech

    This is called a vertex presentation. A breech presentation occurs when the fetus's buttocks, feet, or both are in place to come out first during birth. This happens in 3-4% of full-term births. ... The uterus is not normal in shape or has abnormal growths such as fibroids. The placenta covers all or part of the opening of the uterus ...

  15. Vertex Presentation : Types, Positions, Complications and Risks

    As mentioned earlier, a vertex position is a baby's position during vaginal delivery. The baby moves into the vertex position between the 33 rd - 36 th week of pregnancy. In this position, the baby's head comes out first through the vagina during delivery. However, it is vital to know that the baby can present with other positions like ...

  16. Cephalic presentation

    A cephalic presentation or head presentation or head-first presentation is a situation at childbirth where the fetus is in a longitudinal lie and the head enters the pelvis first; the most common form of cephalic presentation is the vertex presentation, where the occiput is the leading part (the part that first enters the birth canal). All other presentations are abnormal (malpresentations ...

  17. Abnormal Fetal lie, Malpresentation and Malposition

    Cephalic vertex presentation is the most common and is considered the safest; Other presentations include breech, shoulder, face and brow ... If the chin is anterior (mento-anterior) a normal labour is possible; however, it is likely to be prolonged and there is an increased risk of a C-section being required; If the chin is posterior (mento ...

  18. Malpresentation, Malposition, Cephalopelvic Disproportion and Obstetric

    Vertex presentation is found in 95% of labours at term and is associated with flexion of the fetal head. Breech, brow, ... Successful outcome depends on a normal rate of cervical dilatation, descent of the breech and a normal fetal heart rate (FHR) pattern. Where progress of labour is poor and uterine contractions are inadequate, oxytocin ...

  19. Labour and Delivery Care Module: 8. Abnormal Presentations and Multiple

    8.1 Normal and abnormal presentations 8.1.1 Vertex presentation. In about 95% of deliveries, the part of the fetus which arrives first at the mother's pelvic brim is the highest part of the fetal head, which is called the vertex (Figure 8.1).This presentation is called the vertex presentation.Notice that the baby's chin is tucked down towards its chest, so that the vertex is the leading ...

  20. Vertex presentation

    vertex presentation. presentation, in childbirth, the position of the fetus at the time of delivery. The presenting part is the part of the fetus that can be touched by the obstetrician when he probes with his finger through the opening in the cervix, the outermost portion of the uterus, which projects into the vagina.

  21. Malpresentations

    Fetal malpresentation exists when the presenting part is other than the normal vertex of the fetal head. This includes two malpresentations that are covered in other chapters: breech ( Chapter 16 ) and cord presentation ( Chapter 18 ).The remaining malpresentations that will be covered in this chapter are face, brow, transverse lie with shoulder or arm presentation, and compound presentations.

  22. Vertex presentation Definition & Meaning

    The meaning of VERTEX PRESENTATION is normal obstetric presentation in which the fetal occiput lies at the opening of the uterus.

  23. Google Cloud Next 2024: Everything announced so far

    This, Kyle Wiggers writes, is "Google's most capable generative AI model," and is now available in public preview on Vertex AI, Google's enterprise-focused AI development platform.